display Acura TSX 2013 Navigation Manual

29

Interface Settings
Color
Set the screen brightness separately for Day and Night modes. Press the
a

(Display mode) button to cycle through the display modes (Day to Night to Off).
1.Press the
a
button.

The Brightness bar is displayed for a few seconds.
2.Press the
a
button again.

Repeat the procedure to switch the display modes.

Rotate
i
to adjust the
brightness. Press
u
.
■Switching Display Mode Manually
1Switching Display Mode ManuallyA visual guide helps y
ou see the difference
between Day an
d Night modes.
2Day or Night Mode
P. 11
Recommended Settings•Select mid-range for
the dash illumination.
•Select
WHITE
for the map Day display and
BLACK
for the map Night display.
Continued
QRG
System Setup

30

Interface Settings
Color
Illumination control
Priority
Operation
a
button
1
Selects Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below.Remember
: Once you press this button, you assume full
manual control of the display mode until the ignition is turned off.
Sunlight sensor (see your Owner’s Manual for location)
2 If the sunlight sensor detects daylight and the headlights
are turned on, the system automatically overrides the Night display and displays the Day display mode.Remember
: If desired, use the
a
button to override
this automatic choice.
Dash illumination adjustment buttons (see your Owner’s Manual for location)
3
When headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness setting (beeps).Remember
: Adjust the dash brightness back to mid-range
to allow auto switching by sensing the headlights are on or off.
Headlights (Auto/On/Off)
4 When turned on, the display changes to Night display
mode. The previous three controls listed above can “cancel” this function.Remember
: Use the
a
button, or adjust the dash
illumination to full brightness,
to set the display to your
desired choice.
Screen color choice
N/A
The user can select the color of the screen that will be displayed for the Day and Night display modes described above.Remember
: For best contrast, ensure
that the map color is
white for Day and black for Night.
QRG
System Setup

31

Interface Settings
Language
LanguageHINFO/PHONE button
 Setup
 Other
 Language
Set the system language used on all scr
eens. You can choose from three languages:
English
, Français
(French),
Español
(Spanish).
Rotate
i
to select the system
language. Press
u
.
1LanguageVoice confirmation of ci
ties and streets only
occurs when
English
is the system language.
When
Français
or
Español
is selected, some
messages continue to be
displayed in English.
QRG
System Setup

32

Interface Settings
Wallpaper
WallpaperHINFO/PHONE button
 Setup
 Other
 Wallpaper
Select, delete, and import wallpaper pi
ctures for display on the screen.
Rotate
i
to select an item. Press
u
.
The following item
s are available:
•Select a Picture for Wallpaper
: Sets the desired picture for the wallpaper.
2Selecting a Wallpaper Picture
P. 33
•Delete Pictures on HDD
: Deletes pictures on the Hard Disc Drive.
2Deleting Pictures from HDD
P. 34
•Import Pictures from USB
: Stores pictures on the Hard Disc Drive.
2Importing Pictures from USB
P. 35
QRG
System Setup

33

Interface Settings
Wallpaper
HINFO/PHONE button
 Setup
 Other
 Wallpaper
 Select a Picture for
Wallpaper
1.Rotate
i
to select a picture.

The picture is displayed on the screen.

Alternatively, rotate
i
to
select
Disable Wallpaper
to
disable the wallpaper picture setting.
2.Press
u
to select
OK
.
■Selecting a Wallpaper Picture
1Selecting a Wallpaper PictureTwo images are provided for the HDD as a factory default.
QRG
System Setup
Press
u
.

34

Interface Settings
Wallpaper
HINFO/PHONE button
 Setup
 Other
 Wallpaper
 Delete Pictures on
HDD
1.Rotate
i
to select a picture.

The picture is displayed on the screen.
2.Press
u
to select
OK
.

Repeat step 1 and 2 to delete other pictures.

Items to be deleted are indicated with a trash icon.
3.Move
r to select
OK
.
4.Rotate
i
to select
Yes
. Press
u

to delete the picture(s).
■Deleting Pictures from HDD
1Deleting Pictures from HDDIf there are no pictures
on the HDD, “No Entries
Exist” is displayed. You can only delete pictures when the vehicle is in Park. You can only delete pictures
that have been fully
uploaded from a USB flash drive.
Trash icon
QRG
System Setup
Press
u
.

35

Interface Settings
Wallpaper
HINFO/PHONE button
 Setup
 Other
 Wallpaper
 Import Pictures
from USB
1.Connect a USB flash drive containing pictures.2.Rotate
i
to select a picture to
upload. Press
u
.

Repeat the procedure to upload more pictures.
3.Move
r to select
OK
.
■Importing Pictures from USB
1Importing Pictures from USBYou can only import pictures when the vehicle is in Park. You can connect a USB flash drive using the USB adapter cable in the console compartment. 2Connecting a USB Flash Drive
P. 164
You can only import pict
ures from the root
directory. Pictures in
folders cannot be imported.
The display size
is a fixed 800
 480 pixels.
Smaller pictures are displayed against a black background. Larger pictures are scaled down without changing the aspect ratio. Ten pictures (in BMP or
JPEG format) can be
saved to the HDD for Driver 1 and Driver 2 each.Incompatible data format
s or pictur
es greater
than 6 MB cannot be uploaded. Pictures with a file
name longer than 211
characters cannot be uploaded. If you attempt to upload
a picture with the same
name as an existing picture, a pop-up screen asks if you want to overwrite
the existing picture file.
QRG
System Setup

37

Personal Information
Address Book
Address BookHINFO/PHONE button
 Setup
 Personal Information
 Address Book
Store up to 200 address entries in two addr
ess books (Driver 1 and Driver 2). You can
add, edit, and delete information in the address books.
Move
r to change the user address
book (
DRIVER 1
or
DRIVER 2
).
Move
w
or
y
to display only the
addresses in the selected category.
HINFO/PHONE button
 Setup
 Personal Information
 Address Book
This section explains how to enter the name and address.
1.Rotate
i
to select
New Address
.
Press
u
.
1Address BookThe number of addresses is shared by the two address books. For example, if Driver 1 has 150 addresses, Driver 2 can only have 50. If you have PIN-protec
ted your address book,
enter your PIN when
prompted. Move
r to
select
OK
. PIN numbers are optional.
2PIN Numbers
P. 42
Any address book categories
you create are also
displayed on the Select an Address screen. 2Selecting an Address Book Category
P. 40
■Adding an Address Book Entry
1Adding an Address Book EntryIf you do not give the address a name, one is automatically assigned (e.g., Address 001). You can re-enter, edit, or make
changes to any entry.
“Address” is the
only required field.
Continued
QRG
System Setup

39

Personal Information
Address Book
The following items are available: •Current Position:
Select your current position.
•Address:
Enter an address on the character input screen when prompted.
2Address
P. 70
•Previous Destinations:
Select a previous destination.
2Previous Destination
P. 76
•Place Name:
Enter the name of a place/landmark.
2Place Name
P. 77
•Place Category:
Select a category to search for a place/landmark (e.g.,
Banking, Lodging).
2Place Category
P. 80
•Place Phone Number:
Enter the phone number of a place/landmark.
2Place Phone Number
P. 84
HINFO/PHONE button
 Setup
 Personal Information
 Address Book
1.Rotate
i
to select the address to
edit. Press
u
.
2.Enter the name, address, phone number, and category fields.2Adding an Address Book Entry P. 373.Move
r to select
OK
.
■Editing an Address Book Entry
1Adding an Address Book EntryWhen you use
Place Name
or
Place Category
,
the phone number is au
tomatically entered.
1Editing an Address Book EntryThe entered contents are displayed on the Edit address screen.
QRG
System Setup

42

Personal Information
PIN Numbers
System Setup
PIN NumbersHINFO/PHONE button
 Setup
 Personal Information
 PIN Number
Set a four-digit PIN for protecting pers
onal addresses and your home addresses.
Once you set a PIN, you are prompted to
enter it whenever you access a personal
address or a home address.
1.Rotate
i
to select the PIN to
create. Press
u
.
2.Rotate
i
to select a digit to
enter. Press
u
. Repeat to enter a
new 4-digit PIN.3.Re-enter the new PIN, when prompted, to confirm the number you just entered.
If you have not entered the same number both times, an “INCORRECT PIN” message is displayed. Enter your PIN again.
1PIN NumbersPIN Personal Identification Number (PIN) is a password used to access personal data. PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, your
dealer will have to reset
the navigation system a
nd all of your stored
information will be erased
. The factory default is
no PIN. Go Home PIN Go Home PINs are shared with Driver 1 and Driver 2. If either Driver
1 or Driver 2 sets a Go
Home PIN, both of them need to enter the PIN when:•selecting
Go Home
for a destination
•selecting
Home Address
for editing
If you want to stop using a PIN, move
r to select
DO NOT USE PIN
.
QRG