stop start ACURA ZDX 2010 User Guide

ACURA ZDX 2010 User Guide ZDX 2010 ACURA ACURA https://www.carmanualsonline.info/img/32/57537/w960_57537-0.png ACURA ZDX 2010 User Guide

Page 73 of 645

ACURA ZDX 2010 User Guide 2. If it comes on and stays on at anyother time, there is a problem with
the VSA or Hill Start Assist
system. You will also see a
‘‘CHECK VSA SYSTEM ’’or
‘‘ CHECK HILL START ASSIST
SYSTEM

Page 75 of 645

ACURA ZDX 2010 User Guide Super Handling-All
Wheel Drive (SH-AWD)
Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If this indicator comes on at
any other

Page 76 of 645

ACURA ZDX 2010 User Guide Lights On Indicator
This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or
position. This indicator will
also come on when the light switch i

Page 77 of 645

ACURA ZDX 2010 User Guide Active Damper System
Indicator
On models with active dampersystemThis indicator normally comes on for
a few seconds when you select the
ON mode by operating the engine
start/stop button (see page 194)

Page 78 of 645

ACURA ZDX 2010 User Guide Adaptive Cruise Control
(ACC) Indicator (Amber)
On models with adaptive cruise control(ACC)This indicator normally comes on for
a few seconds when you select the
ON mode by operating the engine
start/

Page 79 of 645

ACURA ZDX 2010 User Guide Electronically Controlled
Power Steering System
(ECPS) Indicator
On models with electronicallycontrolled power steering system(ECPS)This indicator normally comes on
when you select the ON mode by
oper

Page 80 of 645

ACURA ZDX 2010 User Guide If the indicator comes on at any other
time, there is a problem with the
CMBS. You will also see a‘‘CHECK
CMBS SYSTEM ’’message on the
multi-information display. If this
happens, take your veh

Page 83 of 645

ACURA ZDX 2010 User Guide The multi-information display in the
instrument panel displays various
information and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle

Page 84 of 645

ACURA ZDX 2010 User Guide If you do not fasten your seat belt,
you will also see a‘‘FASTEN SEAT
BELT ’’message on the multi-
information display when you turn
the ignition switch to the ON (II)
position.
These messages

Page 85 of 645

ACURA ZDX 2010 User Guide In the multi-information display, the
system message is also displayed
(see page 81) and you can customize
your vehicle control settings (see
page 94).
The multi-information display
consists of an upp
Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 100 next >