wheel ACURA ZDX 2010 User Guide

ACURA ZDX 2010 User Guide ZDX 2010 ACURA ACURA https://www.carmanualsonline.info/img/32/57537/w960_57537-0.png ACURA ZDX 2010 User Guide

Page 78 of 645

ACURA ZDX 2010 User Guide Adaptive Cruise Control
(ACC) Indicator (Amber)
On models with adaptive cruise control(ACC)This indicator normally comes on for
a few seconds when you select the
ON mode by operating the engine
start/

Page 83 of 645

ACURA ZDX 2010 User Guide The multi-information display in the
instrument panel displays various
information and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle

Page 89 of 645

ACURA ZDX 2010 User Guide SH-AWD Torque Distribution
MonitorThis monitor shows how much
torque is being delivered to each
wheel. For more information, see
page 487.Tire Pressure Monitor
You can see the pressure of each tire
in

Page 94 of 645

ACURA ZDX 2010 User Guide System MessagesIf there is a problem with your
vehicle, for example, the engine oil
level is low or a door is not fully
closed, the multi-information display
will show you the problem. It does
this by

Page 102 of 645

ACURA ZDX 2010 User Guide Group SetupMenu Item DescriptionSetting OptionPage
POSITION
SETUP
(P. 114) MEMORY POSITION LINK Changes the drivers seat, the steering wheel, and
the outside mirror positions to a stored setting. ON

Page 119 of 645

ACURA ZDX 2010 User Guide Position Setup
Here are the two custom settings for
the position setup:●MEMORY POSITION LINK●AUTO TILT AND TELESCOPE
STEERING WHEEL
While ‘‘POSITION SETUP ’’is
shown, press the SEL/RESET b

Page 120 of 645

ACURA ZDX 2010 User Guide Memory Position LinkIf‘‘MEMORY POSITION LINK ’’is
set to ‘‘ON, ’’the drivers seat, the
steering wheel, and outside mirror
positions move to the position stored
in the memory when you

Page 121 of 645

ACURA ZDX 2010 User Guide When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the‘‘SETTING INCOMPLETE ’’
message appears, go back to

Page 122 of 645

ACURA ZDX 2010 User Guide Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO (▲/▼ ) button, then enter
your selection by pressing the SEL/
RESET button.
When your selection is successfu

Page 141 of 645

ACURA ZDX 2010 User Guide ꭧ1: If equipped
ꭧ 2: To use the horn, press the center pad of the steering wheel.Vehicle with navigation system is shown. HEADLIGHT WASHER
BUTTON
ꭧ 1(P. 138)
MIRROR CONTROLS
(P. 178) HEADLIGHT/T
Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 100 next >