driver seat adjustment Alfa Romeo 166 2007 Owner handbook (in English)

31
SEATS
FRONT SEATS
Manual adjustment controls
Moving the seat backwards or
forwards
Lift lever (A-fig. 23) and push the
seat backwards or forwards. IMPORTANTOnce you have let go
of the lever, check that the seat is firmly
locked in the runners by trying to move it
back and forth. If the seat is not locked
properly, in the case of collision it might
move unexpectedly with clearly danger-
ous consequences.
Adjusting the height of the
driver’s seat
To raise the seat, pull the lever (B-
fig. 23) taking it upwards, then contin-
ue operating the lever (up and down) un-
til reaching the required height. To lower
the seat, push the lever (B) downwards,
then operate the lever (up and down) un-
til reaching the height required.
IMPORTANT Adjustment must only
be carried out when seated in the driver’s
seat.Seat inclination power adjustment
The adjustment is performed by apply-
ing pressure on the front or back part of
the two-position switch (C-fig. 23).
Seat warming(fig. 24)
(optional for versions/markets where
applicable)
The seat warming pad can be switched
on and off using switch (A) on the outer
side of the seat.
When the warming pad is on, the led
on the switch turns on.
Adjustments may be
made solely with the car
stationary.
WARNING
fig. 23
674PGSm
fig. 24
672PGSm
Upholstery of your car
has been designed to
withstand wear deriv-
ing from common use of the car.
You are however recommended
to avoid strong and/or continu-
ous scratching with clothing ac-
cessories such as metallic buck-
les, studs, Velcro fastenings and
the like, since these items cause
circumscribed stress of the cover
fabric that could lead to yarn
breaking, and damage the cover
as a consequence.

32
Controls for seats with electric
adjstment
(on request for versions/
markets where applicable)
The position of the seats is adjusted
electrically with the controls (A-fig. 25-
26) and (B-fig. 25-27):
A- Multifunction control:
1- raising the front of the seat
2- raising the rear of the seat
3- vertical movement of the seat
4- longitudinal movement of the seat.
B- Multifunction control:
5- seat back rake adjustment
6- lumbar adjustment of the seat.
C- Seat heating.Lumbar adjustment of the seat is carried
out raising or lowering the control (B-
fig. 25-27), until finding the most
comfortable position.
Seat heating (fig. 28)
Seat heating is turned on and off using
the switch (C) on the outer side of the
seat.
When seat warming is on the led on the
switch lights up.Memorising the driver’s seat
positions(fig. 29)
The system makes it possible to memo-
rise and call up three different positions
of the driver’s seat.
To memorise a seat position, proceed as
follows:
1) Adjust the position of the driver’s
seat with the controls described in the
previous paragraph.
2) Simultaneously press (for about 1
second) the button (MEM-fig. 29)
and one of the buttons (1), (2), or (3),
each corresponding to a position that can
be memorised.
3) Proceed in the same way to memo-
rise the other two positions of the seat.
fig. 26 fig. 25
319PGSm604PGSm
fig. 27
603PGSm