technical data ALFA ROMEO GIULIA 2023 Owners Manual

2

READ THIS CAREFULLY
Warnings And Cautions
While reading this Owner’s Manual you will find a series of WARNINGS that must be carefully followed.
WARNINGS are statements against operating procedures that could result in a collision, bodily injury and/or death.
While reading this Owner's Manual, you will also find a series of CAUTIONS that must also be followed.
CAUTIONS are statements against operating procedures which could result in damage to your vehicle.
WARNINGS and CAUTIONS are called out in the text of this manual with the following symbols:
WARNINGS that could result in a collision, bodily injury and/or death if disregarded.
CAUTIONS that could result in vehicle damage if disregarded.

NOTE:
This Owner’s Manual describes all versions of this vehicle. Optional equipment meant for specific markets or particular trim levels, engines and versions
of this vehcile are not always identified in the text. Therefor should only consider the information related to the trim level, engine, and version of the vehcile
you have aquired. Any content in this manual that may apply to optional equipment which may or may not be applicable to your vehicle will be identified by
the indicator: “If Equipped”.The data contained in this publication is intended to help you use your vehicle in the best possible way. Alfa Romeo and FCA
US LLC aim for constant improvement of their vehicles. For this reason, they reserve the right to make changes to the model described for technical and/
or commercial reasons.For further information, contact an authorized dealer.
Respecting The Environment
The vehicle is fitted with a system that carries out a continuous diagnosis of the emission-related components in order to help protect the
environment (if equipped).
23_GA_OM_EN_USC_t.book Page 2

224

TECHNICAL SPECIFICATIONS
For the enthusiasts, the technician, or those who
just want to know every detail of their vehicle,
useful information on understanding how your
vehicle works is contained in this chapter and
illustrated with data, tables, and graphics.
VEHICLE IDENTIFICATION
NUMBER (VIN)
The VIN is stamped on a plate on the front left
corner of the dashboard cover, which can be seen
from outside the vehicle, through the windshield.Windshield VIN Location
VEHICLE IDENTIFICATION NUMBER (VIN)
P
LATE
The plates are located on the left side A-pillar and
contain data about:
Vehicle Identification Number (VIN).
Vehicle type (USA and Canada only).
Color code.
Place of manufacturing of the vehicle (USA and
Mexico only).
Vehicle manufacturing date.
Maximum permitted weights.
Permitted tire inflation pressure (USA and
Canada only).
ENGINE
2.0L Engine
Cycle Four
Number and position of cylinders 4 inline
Piston bore and stroke (mm) 84 / 90
Total displacement (cm³) 1,995
Compression ratio 10:1
Maximum power (SAE) (HP) 280
Maximum power (kW) 209
Corresponding engine speed (RPM) 5,200
Maximum torque (SAE) (ft-lb) 295
Maximum torque (Nm) 400
Corresponding engine speed (RPM) 2,250 – 4,000
Fuel 87 Octane (R+M)/2 Method Minimum, 91 Recommended, ethanol
percentage is 0–15%
23_GA_OM_EN_USC_t.book Page 224