key Alfa Romeo GT 2005 Owner handbook (in English)

GETTING TO KNOW YOUR CAR
163
CONTROLS ON FRONT PANEL
(fig. 154)
1. AF-TAFunction select button:
– AF (alternative frequen-
cies)
– TA (traffic information)
2. PTYFunction select button:
– RDS PTY (type of RDS pro-
gramme)
– Choice of the subject of
PTY transmission in EON
mode
3.Compact Disc slot4.
¯¯Selected Sound and Menu ad-
justment and manual station
search button
5.
˚Compact Disc eject button
6.
▲Sound and Menu select button
and automatic station search
7.
˙˙Selected Sound and Menu
function adjustment and man-
ual station search
8.
▼Sound and Menu select button
and automatic station search9. MENU-PSMenu and Scan function
button (hearing stored
stations in sequence)
10. 6Function select button:
– Call station no. 6
– Store station no. 6
6 MP3
|(only if car radio with
reader MP3 is present)
Function selection key:
– Calling station no. 6
– Storing station no. 6
– Displaying folders/pieces
in format MP3
fig. 154A0A0230b

GETTING TO KNOW YOUR CAR
165
6.Multifunction button:
– Radio: call preset stations (from 6 to
1)
– Compact Disc player: select previous
track.
Volume adjustment and Mute
buttons
The buttons for volume adjustment (1)
and (2) and for turning Mute on/off (3)
work in the same way as the corresponding
buttons on the radio.
Radio frequency and sound
source select button
To cyclically select the radio frequencies
and sound sources, briefly and repeatedly
press button (4).
The frequencies/sources available are:
FMI, FMII, FMT, MW, LW, CD*, CDC**.
(*) Only if the Compact Disc is inserted
(**) Only if the CD-Changer is connected
Multifunction buttons (5) and (6)
Multifunction buttons (5) and (6) call the
preset radio stations, or select the next/pre-
vious track when listening to a Compact
Disc.
Press button (5) to select stations from
1 to 6 or to listen to the next track on a CD.
Press button (6) to select stations from
6 to 1 or to listen to the previous track on
a CD.
FUNCTIONS AND
ADJUSTMENTS
(fig. 154)
Switching on
The set is turned on keeping the “ON”
(20) button pressed. If the radio was on
before the engine was turned off, it will turn
on again automatically the next time the en-
gine is started.
If the radio is turned on with the ignition
key at STOP, it will turn off automatically
after about 20 minutes.
With the ignition key at MARthe “ON”
button is always lit to facilitate turning on
the radio.When the radio is turned on again it will
resume with the same settings that were
working before turning off, with the excep-
tion of the volume which, if it was set to
above 20, it is activated at 20.
Turning the radio off
To turn off keep the “ON” button (20)
pressed again.
If the ignition key is turned to STOPwhen
the radio is on, it will turn off automatical-
ly and turn on again the next time the key
is turned to MAR.
Selecting the Radio/Compact
Disc/CD-Changer functions
Briefly and repeatedly pressing the “SRC”
button (14) it is possible to select the fol-
lowing functions in sequence:
– TUNER (Radio)
– CD (only if the Compact Disc is insert-
ed)
– CHANGER (only if the CD-Changer is con-
nected).

GETTING TO KNOW YOUR CAR
177
–SENS DX/LO(Tuning sensitivity)
–CD(CD display setting)
–CDC(CD-Changer display setting, if in-
stalled)
–REG(Regional programmes).
To exit the Menu function, press the
“MENU” button again (9).
IGN TIME function (switching off
mode)
This function enables to set radio switch-
ing off in two different modes. To turn this
function on/off, use buttons 4 (
˜) or 7
(
÷).
The display will show the selected mode:
– “00 MIN”: deactivation dependent of
ignition key. The radio will switch off auto-
matically as soon as the ignition key is
turned to STOP;
– “20 MIN”: deactivation independent of
ignition key. The radio will stay on for max.
20 minutes after turning the ignition key
toSTOP.IMPORTANTShould the radio turn off
automatically after turning the ignition key
toSTOP(for the immediate or 20-minute
delayed deactivation), it will turn on auto-
matically turning the ignition key to MAR.
If the radio is turned off by pressing the
knob/button20(VOLUME ON/OFF),
when turning the key toMARthe radio will
stay off.
Turning the equalizer on/off
(excluding versions with HI-FI
BOSE sound system)
The integrated equalizer can be turned on
or off. With the equalizer off, it is possible
to change the sound settings only adjust-
ing the bass (“BASS”) and treble tones
(“TREBLE”), while activating the function
makes it possible to adjust the sound curves.
To turn the equalizer off, select “PRE-
SET” with “
▲” (6) or “▼” (8).To turn the equalizer on, select one of the
following with “
▲” (6) o “▼” (8):
– “USER” (adjustment of the 7 equal-
izer bands that can be changed by the user)
– “CLASSIC” (predefined equalizer ad-
justment)
– “ROCK” (predefined equalizer adjust-
ment)
– “JAZZ” (predefined equalizer adjust-
ment).
After selecting the last adjustment set in
the Menu using “
▲” (6) or “▼” (8), use
“
˙˙” (7) or “¯¯” (4) to change it.
When one of the equalizer settings in on,
the display shows “EQ”.
On versions with BOSE HI-FI system, ana-
logue equalizing in amplitude and phase of
the signal is done automatically by the am-
plifier.

GETTING TO KNOW YOUR CAR
187
Example:
5 Folder 2
8 Folder 3
Track 1
Track n
12 Folder n
Track 1
Track n6 “Subfolder” 2.1
Track 1
Track n
9 “Subfolder” 3.1
10 “Subfolder” 3.1.1
Key:
n = Number of folders/tracks
= Structure of folders7 “Subfolder” 2.n
Track 1
Track n
11 “Subfolder” 3.n
Track 1
Track n 1 Main folder
Track 1
Track n
2 Folder 1
Track 1
Track n3 “Subfolder” 1.1
Track 1
Track n4 “Subfolder” 1.n
Track 1
Track n

GETTING TO KNOW YOUR CAR
195
To clear the name of the CD inserted, turn
the function on and press 16(2-CLR) for
about 5 seconds. The system beeps and for
about 2 seconds the display shows “ONE
NAME DELETED”. At this point the procedure
can be started to give a new name.
To clear all the names, turn the function
on and keep button 16(2-CLR) for over
8 seconds. The set gives two beeps and the
display shows “ALL NAME DELETED” for
about 2 seconds. At this point, it is possi-
ble to start the name allocation procedure.
PHONE function
(phone volume adjustment)
With this function it is possible to adjust
(setting from 1 to 66) or cut off (OFF set-
ting) the telehpone sound.
To turn on/off, use 4(
¯¯) or 7(˙˙).
To adjust the sound, use 19(VOL–) or
21(VOL+).
The display will show the current status
of the function:
– “PHONE FUNCTION”: function on;
– “PHONE VOLUME: 23”: function on
with volume setting 23;
– “OFF”: function off.HICUT function
(treble tone reduction)
Using this function it is possible to reduce
the treble tones, in accordance with the sig-
nal transmitted. To turn this function on/off,
use4(
¯¯) or 7(˙˙).
The display will show the current status
of the function:
– “HICUT FUNCTION: ON”: function on;
– “HICUT FUNCTION: OFF”: function off.IGNITION TIME function
(turning off mode)
With this function it is possible to set the
radio turning off mode according to two dif-
ferent procedures. To turn on/off, use
4(¯¯) or 7(˙˙).
The display shows the mode chosen:
– “00 MIN”: turning off depends on the
ignition key. The radio turns off automati-
cally as soon as the ignition key is turned to
STOP;
– “20 MIN”: the radio turns off regard-
less of the ignition key position. The radio
stays on after turning the ignition key to
STOPfor a maximum of 20 minutes.
IMPORTANTIf the radio turns off au-
tomatically after turning the ignition key to
STOP(for immediate switching off or de-
layed switching off after 20 minutes), the
set will turn on automatically turning the ig-
nition key to MAR. Instead, if the radio is
turned off using button 20, when the igni-
tion key is turned to MAR, the radio set
will stay off.

CORRECT USE OF THE CAR
200
STARTING PROCEDURE
FOR PETROL VERSIONS
IMPORTANTIt is important never to
press the accelerator before the engine
has started.
1) Make sure the handbrake is engaged.
2) Move the gear lever to neutral.
3) Fully depress the clutch pedal, so that
the starter motor is not forced to crank the
gears.
4) Ensure that the electric systems and
devices, especially if they absorb high
quantities of energy (e.g. heated
rearscreen), are switched off.
5) Turn the ignition key to the AV V
position and release it as soon as the
engine starts.
6) If the engine does not start, return
the key to STOP,then repeat the proce-
dure.
IMPORTANTIf it is difficult to start
the engine do not insist with extended
attempts which may damage the catalyst,
but contact Alfa Romeo Authorised
Services. The ignition switch is fitted with a safety
device which obliges the driver to return
the key to the STOPposition before
repeating the starting operation if the
engine does not start immediately.
Similarly, when the engine is running,
the device prevents the key being moved
from the MARto the AV Vposition.
STARTING
THE ENGINE
IMPORTANTThe car is fitted with an
electronic engine lock device. If the engine
fails to start, see the “Alfa Romeo CODE
system”.
C C
O O
R R
R R
E E
C C
T T
U U
S S
E E
O O
F F
T T
H H
E E
C C
A A
R R
We recommend that dur-
ing the initial period you
do not drive to full vehicle
performance (for example exces-
sive acceleration, long journeys
at top speed, hard braking etc.).
Running the engine in
confined areas is
extremely dangerous. The
engine consumes oxygen and
produces carbon monoxide which
is a highly toxic and lethal gas.
When the engine is
switched off never leave
the ignition key in the
MAR position to prevent point-
less current absorption from
draining the battery.

CORRECT USE OF THE CAR
201
STARTING PROCEDURE
FOR JTD VERSIONS
1) Make sure the handbrake is
engaged.
2) Set the gearshift lever to neutral.
3) Turn the ignition key to MAR.The
reconfigurable multifunction display will
show the
mwarning light.
4) Wait for the
mto turn off, which
takes place sooner, the warmer the
engine. With the engine very warm the
light might stay on for such a short time
as to pass unnoticed.
5) Fully depress the clutch pedal.
6) Turn the ignition key to AV Vas
soon as the
mwarning light has gone
out. Waiting too long, makes the warming
work of the glow plugs useless .IMPORTANTThe electric devices
that absorb a high amount of energy (cli-
mate control, rearscreen heating, etc.) are
cut off automatically during starting.
If the engine does not start at the first
attempt, move the ignition key to STOP
before repeating starting.
If starting is difficult (with the Alfa
Romeo CODE system working properly),
do not insist with prolonged attempts.
Only use an auxiliary battery if the cause
is due to low battery charge. Never use a
battery charger to start the engine.
WARMING THE ENGINE
– Drive off slowly, at medium revs with-
out accelerating abruptly.
– Do not drive at full performance for
the initial kilometres of the journey. Wait
until the engine coolant temperature
reaches 50-60 °C.

Never push, tow or
coast start the vehicle.
This could cause fuel to
flow into the catalyst damaging
it irreversibly.
Remember that the
engine brake and power
steering are not opera-
tional until the engine is started,
therefore, much greater effort
than usual is needed on the brake
pedal and steering wheel.CORRECT USE OF THE CAR
202
For cars with tur-
bocharger in particular,
but for all cars in general,
sharp accelerating should be
avoided before switching the
engine off.
A “kick” on the accelerator
serves no purpose, consumes fuel
pointlessly and may cause seri-
ous damage to the turbocharger
impeller bearings.EMERGENCY STARTING
If the Alfa Romeo CODE system does not
recognise the code transmitted by the igni-
tion key (warning light
Yon the instru-
ment cluster glowing on steadily) emer-
gency starting may be carried out using
the code of the CODE card.
For the correct procedure see the chapter
“In an emergency”.
IMPORTANTIf the engine turns off
with the vehicle on the move, the next
time it is started, the Alfa Romeo CODE
warning light may turn on(
Y). In this
case, check that switching off and starting
the engine again with the vehicle station-
ary, the warning light stays off. If not, con-
tact Alfa Romeo Authorised Services.
ENGINE SWITCHING OFF
– Release the accelerator pedal and wait
until the engine reaches idle speed.
– Turn the ignition key to the STOP
position and switch off the engine.
IMPORTANTAfter a tiring journey it is
advisable to let the engine “get its breath
back” allowing it to idle a while to lower
the temperature in the engine compart-
ment.

Never leave children
unattended in the vehicle.
Always remove the igni-
tion key when leaving the vehicle
and take it with you.To avoid useless con-
sumption of power and
possible draining of the
battery, never leave the ignition
key in the MAR position when
the engine is not running.
CORRECT USE OF THE CAR
203
PARKING
When the vehicle is parked, proceed as
follows:
– Switch off the engine.
– Engage the handbrake.
– Engage first gear if the vehicle is faced
uphill or reverse if the vehicle is facing
downhill.
– Turn the front wheels so that the vehi-
cle will immediately come to a halt if the
handbrake slips.
REDUCING RUNNING
COSTS AND
ENVIRONMENT
POLLUTION
By following a few simple guidelines, it
is possible to save vehicle running costs
and reduce harmful emissions.
GENERAL CONSIDERATIONS
Vehicle maintenance
To take care of the car maintenance
have the checks and adjustments carried
out in accordance with the “Scheduled
Maintenance Programme”.
Tyres
Check the pressure of the tyres routinely
at an interval of no more than 4 weeks: if
the pressure is too low consumption levels
increase as resistance to rolling is higher.
Useless loads
Never travel with an overload in the
boot. The weight of the vehicle (especial-
ly in urban traffic), and its geometry heav-
ily affect consumption levels and stability.Electric services
Use electric devices only for the amount
of time needed. Rearscreen heating, addi-
tional headlights, windscreen wipers and
heater fan need a considerable amount of
energy, therefore increasing the require-
ment of current increases fuel consump-
tion (up to +25% in the urban cycle).
Climate control system
The climate control system is a further
load bearing heavily on the engine induc-
ing higher consumption levels(up to
+20% on average). Outside temperature
permitting, preferably use the air vents.
Aerodynamic items
The use of non-certified aerodynamic
items may adversely affect air drag and
consumption levels.

IN AN EMERGENCY
210
3) Fully depress the accelerator pedal
and keep it pressed. The
Uwarning light
will come on for eight seconds and then
go off, now release the accelerator pedal.
4) The
Uwarning light begins to flash:
after it has flashed the same number of
times as the first digit on the CODE card,
press the accelerator pedal and keep it
pressed until the
Uwarning light turns
on (for four seconds) and then goes off;
now release the accelerator pedal.
5) The
Uwarning light starts to flash:
after the number of flashes corresponding
to the second digit on the CODE card,
press the accelerator pedal and keep it
pressed.
6) Repeat this procedure for the remain-
ing digits on the CODE card.
7) After entering the last figure, keep
the accelerator pedal pressed. The
U
warning light turns on (for four seconds)
and then goes off; now release the accel-
erator pedal.8) A quick flash of the
Uwarning light
(for about four seconds) confirms that the
operation has been carried out correctly.
9) Start the engine turning the ignition
key from MARtoAV Vwithout return-
ing the key to the STOPposition.
Conversely, if the
Uwarning light stays
on, turn the key to STOPand repeat the
procedure starting from point 1).
IMPORTANTAfter emergency starting
it is advisable to contact Alfa Romeo
Authorised Services, because the emer-
gency procedure must be repeated each
time the engine is started.
EMERGENCY
STARTING
If it is not possible to deactivate the
engine inhibitor with the Alfa Romeo
CODE system, the
YandUwarning
lights stay on and the engine will not
start. Emergency starting is needed to
start the engine.
IMPORTANTYou are advised to care-
fully read the entire procedure before car-
rying it out.
If a mistake is made during the emer-
gency procedure, the ignition key should
be turned to STOPand the operations
must be repeated from the start (point 1).
1) Read the 5-figure electronic code on
the CODE card.
2) Turn the ignition key to MAR.
I I
N N
A A
N N
E E
M M
E E
R R
G G
E E
N N
C C
Y Y