service interval reset Alfa Romeo MiTo 2013 Owner handbook (in English)

Belt reminder (Reactivation of SBR
buzzer)(for versions/markets, where provided)
This function can only be displayed after Alfa Romeo Authorized
Services have deactivated the SBR system (see "SBR system" in the
"Safety" chapter).Service (Scheduled servicing)With this function it is possible to view information on servicing
deadlines depending on kilometres travelled or daily intervals.
With the Service function it is also possible to view the interval (in
kilometres or miles) before the next engine oil change is due.
To consult this information, proceed as follows:
❒briefly press the MENU ESC button, which makes the display show
the service interval in km or mi according to the previous setting
(see "Distance units of measurement" paragraph);
❒press the MENU ESC button briefly to return to the menu screen or
hold the button down to return to the standard screen.IMPORTANT According to the “Scheduled Servicing Plan”, the car must
be serviced every 30,000 km (petrol versions) or 35,000 km (diesel
versions). This message is displayed automatically when the key is
turned to MAR-ON, starting at 2,000 km (or equivalent value in miles)
from when the next service is due and reappearing every 200 km (or
equivalent value in miles). Below 200 km servicing indications are
more frequent. The display will be in km or mi depending on the
measurement unit settings. When the next scheduled service is
approaching and the key is turned to MAR-ON, the word Service will
appear on the display, followed by the number of kilometres or miles
left. Contact Alfa Romeo Authorized Services where the "Scheduled
Servicing Plan" operations will be performed and the message will be
reset.
Airbag/Passenger bag
(Activation/deactivation front
passenger side bag and Side bag for
chest/pelvis protection)This function is used to activate/deactivate the passenger side air bag.
Proceed as follows:
❒press the MENU ESC button and, after the message Bag pass: Off
(to deactivate) or Bag pass: On (to activate) is displayed by pressing
buttons + or -, press the MENU ESC button again;
❒a confirmation request message will appear on the display;
❒by pressing the + or - buttons select (Yes) (to confirm the activation/
deactivation) or (No) (to cancel);
❒press the MENU ESC button briefly, a message confirming the
selection will be displayed and you will return to the menu screen or
hold the button down to return to the standard screen without
storing.
34GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX