Acura ILX 2013 Navigation Manual

30
XX
Interface Settings
XColour
System Setup
Illumination
controlPriority Operationa button
1
Selects Day, Night, or Off display mode. This button has
the highest priority and overrides all other display control
adjustments listed below.
Remember: Once you press this button, you assume full
manual control of the display mode until the power mode
is set to VEHICLE OFF (LOCK).
Sunlight sensor
(see your
Owner’s Manual
for location)2 If the sunlight sensor detects daylight and the headlights
are turned on, the system automatically overrides the
Night display and displays the Day display mode.
Remember: If desired, use the a button to override
this automatic choice.
Dash illumination
adjustment
buttons (see your
Owner’s Manual
for location)
3
When headlights are turned on, and you wish to have the
Day display mode, adjust the illumination to the full
brightness setting (beeps).
Remember: Adjust the dash brightness back to mid-range
to allow auto switching by sensing the headlights are on or
off.
Headlights
(Auto/On/Off)4 When turned on, the display changes to Night display
mode. The previous three controls listed above can
“cancel” this function.
Remember: Use the a button, or adjust the dash
illumination to full brightness, to set the display to your
desired choice.
Screen colour
choice
N/A
The user can select the colour of the screen that will be
displayed for the Day and Night display modes described
above.
Remember: For best contrast, ensure that the map colour
is white for Day and black for Night.

31
XX
Interface Settings
XLanguage
System Setup
LanguageHINFO button
X Set up
X Other
X Language
Set the system language used on all screens. You can choose from three languages:
English, Français (French), Español (Spanish).
Rotate i to select the system
language. Press u.
1Language
Voice confirmation of cities and streets only
occurs when English is the system language.
When Français or Español is selected, some
messages continue to be displayed in English.

32
XX
Interface Settings
XWallpapers Setting
System Setup
Wallpapers SettingHINFO button
X Set up
X Other
X Wallpapers Setting
Select, delete, and import wallpaper pictures for display on the screen.
Rotate i to select an item. Press u.
The following items are available:
•Select wallpaper picture: Sets the desired picture for the wallpaper.
2Selecting a Wallpaper Picture
P. 33
•Delete pictures on HDD: Deletes pictures on the Hard Disc Drive.
2Deleting Pictures from HDD
P. 35
•Import pictures from USB: Stores pictures on the Hard Disc Drive.
2Importing Pictures from USB
P. 34

33
XX
Interface Settings
XWallpapers Setting
System Setup
HINFO button
X Set up
X Other
X Wallpapers Setting
X Select wallpaper
picture
1.Rotate i to select a picture.
X
The picture is displayed on the
screen.
X
Alternatively, rotate i to
select Blank to disable the
wallpaper picture setting.
2.Press u to set the wallpaper
image.
■Selecting a Wallpaper Picture
1Selecting a Wallpaper Picture
Two images are provided for the HDD as a
factory default.
Continued

34
XX
Interface Settings
XWallpapers Setting
System Setup
HINFO button
X Set up
X Other
X Wallpapers Setting
X Import pictures
from USB
1.Connect a USB flash drive
containing pictures.
2.Rotate i to select a picture to
upload. Press u.
X
Repeat the procedure to upload
more pictures.
3.Move r to select OK.
■Importing Pictures from USB
1Importing Pictures from USB
You can only import pictures when the vehicle is
in Park.
You can connect a USB flash drive using the USB
adapter cable in the console compartment.
2Connecting a USB Flash Drive P. 152
You can only import pictures from the root
directory. Pictures in folders cannot be imported.
The display size is a fixed 800 u 480 pixels.
Smaller pictures are displayed against a black
background. Larger pictures are scaled down
without changing the aspect ratio.
Ten pictures (in BMP or JPEG format) can be
saved to the HDD.
Incompatible data formats or pictures greater
than 6 MB cannot be uploaded.
Pictures with a file name longer than 221
characters cannot be uploaded.
If you attempt to upload a picture with the same
name as an existing picture, a pop-up screen asks
if you want to overwrite the existing picture file.

35
XX
Interface Settings
XWallpapers Setting
System Setup
HINFO button
X Set up
X Other
X Wallpapers Setting
X Delete pictures on
HDD
1.Rotate i to select a picture. Press
u.
X
The picture is displayed on the
screen.
X
Repeat the procedure to delete
other pictures.
X
Items to be deleted are indicated
with a trash icon.
2.Move r to select OK.
3.Rotate i to select Yes. Press u
to delete the picture(s).
■Deleting Pictures from HDD
1Deleting Pictures from HDD
If there are no pictures on the HDD, “No Entries
Exist” is displayed.
You can only delete pictures when the vehicle is
in Park.
You can only delete pictures that have been fully
uploaded from a USB flash drive.
Trash icon

36System Setup
Personal InformationHINFO button
X Set up
X Personal Information
Use the personal information menu to select and set your address books, home
addresses, and PINs. You can also delete unwanted destinations from the list of
previously routed destinations.
Rotate i to select an item. Press u.
The following items are available:
•Address Book: Stores new addresses or edits your address book.
2Address Book
P. 37
•Home Address 1: Sets or edits your home address.
2Home Addresses
P. 41
•Home Address 2: Sets or edits another home address.
2Home Addresses
P. 41
•PIN Number: Sets or changes your PIN.
2PIN Numbers
P. 42
•Previous Destinations: Deletes the destination history.
2Previous Destinations
P. 43
1Personal Information
Personal information cannot be backed up or
moved to another navigation system.

37
XX
Personal Information
XAddress Book
System Setup
Address BookHINFO button
X Set up
X Personal Information
X Address Book
Store up to 200 address entries in the address book. You can add, edit, and delete
information in the address books.
Move r to change the user address
book.
Move w or y to display only the
addresses in the selected category.
HINFO button
X Set up
X Personal Information
X Address Book
This section explains how to enter the name and address.
1.Rotate i to select New Address.
Press u.
1Address Book
If you have PIN-protected your address book,
enter your PIN when prompted. Move r to
select OK. PINs are optional.
2PIN Numbers P. 42
Any address book categories you create are also
displayed on the Select an Address screen.
2Selecting an Address Book Category P. 40
■Adding an Address Book Entry
1Adding an Address Book Entry
If you do not give the address a name, one is
automatically assigned (e.g., Address 001). You
can re-enter, edit, or make changes to any entry.
“Address” is the only required field.
Continued

38
XX
Personal Information
XAddress Book
System Setup
2.Rotate i to select an item. Press
u.
The following items are available:
•Edit Name: Edits the name of the entry.
•Edit Address: Edits the address of the entry.
•Edit Phone No.: Edits the phone number of the entry.
•Edit Category: Specifies the category of the entry.
•Delete: Deletes the entry.
3.Rotate i to select Edit Name.
Press u.
4.Enter a name or title. Move r to
select OK.
5.Rotate i to select Edit Address.
Press u.
6.Rotate i to select an item for
specifying the address. Press u.

39
XX
Personal Information
XAddress Book
System Setup
The following items are available:
•Current Position: Select your current location.
•Address: Enter an address on the character input screen when prompted.2Address
P. 66
•Previous Destinations: Select a previous destination.
2Previous Destinations
P. 72
•Place Name: Enter the name of a place/landmark.
2Place Name
P. 73
•Place Category: Select a category to search for a place/landmark (e.g., Banking,
Lodging).
2Place Category
P. 76
•Place Phone No.: Enter the phone number of a place/landmark.
2Place Phone Number
P. 80
HINFO button
X Set up
X Personal Information
X Address Book
1.Rotate i to select the address to
edit. Press u.
2.Enter the name, address, phone
number, and category fields.
2Adding an Address Book Entry P. 37
3.Move r to select OK.
■Editing an Address Book Entry
1Adding an Address Book Entry
When you use Place Name or Place Category,
the phone number is automatically entered.
You can also add a phone number and category.1Editing an Address Book Entry
The entered contents are displayed on the Edit
address screen.
Continued