Acura ILX 2013 Navigation Manual

50
XX
Routing & Guidance
XUnverified Area Routing
System Setup
Unverified Area RoutingHINFO button
X Set up
X Other
X Routing & Guidance
X Unverified Area
Routing
Receive turn-by-turn map and voice guidance in unverified areas.
Rotate i to select ON or OFF. Press
u.
1Unverified Area Routing
Unverified roads are found in rural areas, and
typically include residential streets away from the
centre of a town. They may not be accurate, and
can contain errors in location, naming, and
address range.
Unverified roads are shown only when viewing
the map in the 80, 200 or 400 m map scales.
Vector line (dotted)
Blue-pink route line
Differences OFF (factory default) ONON or OFF?
The driver wishes to manually
navigate using the navigation map
and choose the streets that lead to
the destination.
The driver chooses to let the
navigation system suggest
possible routing, knowing that the
guidance may not be accurate.
Route
calculationRoute is usually longer, using
verified roads whenever possible.Route is shorter, but uses
unverified (purple) streets that
may not be accurate.
Route line
A blue dotted vector line is displayed
on the map that continually points
to your destination.
A blue-pink dashed route line
highlights suggested unverified
streets on the map while travelling
to your destination.
Cautionary
messagesCautionary pop-up screens and
voice announcements remind you to
obey all traffic restrictions.Cautionary pop-up screens and
voice announcements remind you
to exercise additional caution and
obey all traffic restrictions.

51
XX
Routing & Guidance
XUnverified Area Routing
System Setup
Guidance
(map/voice)
There is no turn-by-turn map or
voice guidance.
Voice guidance commands end
with the phrase “if possible” to
remind you to verify all traffic
restrictions.
Directions
listA direction list is typically not
available. However, depending on
your route, directions are provided
to help you reach the first available
verified road.A direction list is provided
showing street names and turn
symbols in pink. Differences OFF (factory default) ON

52
XX
Routing & Guidance
XEdit Avoid Area
System Setup
Edit Avoid AreaHINFO button
X Set up
X Other
X Routing & Guidance
X Edit Avoid Area
Specify up to five areas to avoid (e.g., road construction, closures), if possible, when
the system calculates routes to your destination.
1.Rotate i to select New Area or
an existing area to edit. Press u.
2.Rotate i to select Edit Name to
label the area to avoid. Press u.
3.Enter a name or title. Move r to
select OK.
4.Rotate i to select Edit Area to
define the area to avoid. Press u.
The following options are available (after an area is set):
•View Area Map: Displays the selected avoid area on the map.
•Delete: Deletes the selected avoid area.
1Edit Avoid Area
The maximum size of an “avoid area” is 800
square metre.
If your selected area contains a highway, you are
asked “Do you want to avoid highways?”
Answering “No” allows you to use a route
through an avoid area on a highway without any
pop-up messages.
You can select areas to avoid, however you
cannot select roads or areas that you want the
system to use for routing.
You can enter up to 25 characters for the name.

53
XX
Routing & Guidance
XEdit Avoid Area
System Setup
5.Rotate i to select a method for
specifying the area. Press u.
The following options are available:
•Address: Specify the general area by entering an address.
2Address
P. 66
•Map Input: Specify the general area by map input.
2Map Input
P. 85
6.If you select Map Input, scroll the
map to position the cursor over
your desired start point, adjusting
the map scale as necessary. Press
u to mark the start point.
X
To redo the area selection, press
the CANCEL button.
7.Scroll the map to “draw” the area.
Press u to mark the end point.
8.Press u to select OK.
X
The area you specify is displayed
in the list of areas to avoid.
1Edit Avoid Area
You can change the map scale to 80, 200, or
400 m.
Cursor
Avoid area

54
XX
Routing & Guidance
XEdit Waypoint Search Area
System Setup
Edit Waypoint Search AreaHINFO button
X Set up
X Other
X Routing & Guidance
X Edit Waypoint
Search Area
Select the distance from your highlighted route line (on either side of your route)
that the system will search for a waypoint.
2Adding Waypoints
P. 112
You can specify a different search distance for highways and surface streets.
1.Rotate i to select an item. Press
u.
2.Rotate i to select a search
distance. Press u.
The following items are available:
•On Highways: 1.6, 3, 8, or 16 km can be set. Factory default is 3 km.
•On Surface Street: 0.8, 1.6, 3, or 8 km can be set. Factory default is 0.8 km.
1Edit Waypoint Search Area
The search distance does not affect the search
range used for the Find Nearest voice commands
(e.g., say
d
“Find nearest gas station”).

55System Setup
Clock AdjustmentHINFO button
X Set up
X Other
X Clock Adjustment
Set the automatic adjustment of the system clock for daylight saving and
international time zones.
Rotate i to select an item. Press u.
The following items are available:
•Auto Daylight: The navigation system automatically adjusts the clock (“spring
ahead” or “fall back” by one hour) when a daylight saving time change occurs.
ON (factory default): Adjusts the clock automatically.
OFF: Disables the feature.
•Auto Time Zone: The navigation system automatically adjusts the clock when
driving through different time zones.
ON (factory default): Adjusts the clock automatically.
OFF: Disables the feature.
•ADJUST TIME: Adjust the current time manually.
2Adjust Time
P. 56
•Reset: Reset the clock settings to the factory default.
2Resetting the Clock Settings
P. 56
1Clock Adjustment
You can check the time and date from any
screen using voice commands.
2Global Commands P. 218
Auto Daylight
This function is not activated in areas that have
not adopted daylight saving time, even if you
have set Auto Daylight to ON.
Auto Time Zone
If you live and work in two different time zones,
you may want to turn Auto Time Zone to OFF.
When driving near a time zone boundary, the
displayed time zone may fluctuate between the
two zone times.

56
XX
Clock Adjustment
XAdjust Time
System Setup
Adjust TimeHINFO button
X Set up
X Other
X Clock Adjustment
X Adjust Time
Adjust the current time (hours and minutes).
1.Move w or y to select HOUR or
MINUTE.
2.Rotate i to adjust the value.
3.Move r to select OK.
Resetting the Clock SettingsHINFO button
X Set up
X Other
X Clock Adjustment
X Reset
Reset the Auto Daylight and Auto Time Zone settings to the factory defaults.

57System Setup
VehicleHINFO button
X Set up
X Other
X Vehicle
Set the off-road tracking feature and correct the vehicle position displayed on the
map.
Rotate i to select an item. Press u.
The following items are available:
•Off-road Tracking: Set whether to display the tracking dots on the map.
2Off-road Tracking
P. 58
•Correct Vehicle Position: Adjust the position of the vehicle on the map.
2Correct Vehicle Position
P. 59

58
XX
Vehicle
XOff-road Tracking
System Setup
Off-road TrackingHINFO button
X Set up
X Other
X Vehicle
X Off-road Tracking
The navigation system can be set to display white off-road tracking dots
(“breadcrumbs”) on the map screen whenever you drive into an area approximately
800 m away from a mapped road.
Rotate i to select an option. Press
u.
The following options are available:
•ON (factory default): The system displays the white tracking dots.
2Driving Off-road
P. 93
•OFF: Disables the feature.
1Off-road Tracking
To clear existing breadcrumbs, set Off-road
Tracking to OFF, exit the Setup screen, and then
set Off-road Tracking to ON again.

59
XX
Vehicle
XCorrect Vehicle Position
System Setup
Correct Vehicle PositionHINFO button
X Set up
X Other
X Vehicle
X Correct Vehicle Position
Manually adjust the current position of the vehicle as displayed on the map screen if
the position appears to be incorrect.
1.Put the vehicle in Park.
2.Rotate i to select Correct
Vehicle Position. Press u.
3.Scroll the map to position the
arrowhead at your correct position.
Press u.
4.Rotate i to position the
arrowhead in the correct direction
the vehicle is facing.
5.Press u to select OK.
1Correct Vehicle Position
An apparent position error can occur where
buildings, tunnels, and other objects block or
reflect the GPS signals, forcing the system to use
“dead reckoning” to determine your location
and direction.
Using this function to adjust vehicle position is
not recommended. When the system reacquires
a GPS signal, it will automatically place the
vehicle in the correct location.
If you continually have to adjust the vehicle
position, you may have problems with the GPS
reception or there may be database errors.
2System Limitations P. 208