light AUDI A4 1999 B5 / 1.G Seatbelts Workshop Manual

69-23


Installing
Vehicles with belt tensioner:
Notes:
Check the following after full backrest installation: - Remove nut -2- (1x) and third rear three-point
seat belt tensioner -3-.
- To install belt guide trim -6-, first attach retaining
tab -10- and insert, then turn retaining tab -11-
inward making sure metal piece -12- is inserted
into cutout -13- of belt guide trim -6- (arrow -B- in
inset).
- Tap lightly on belt guide trim -6- in direction of
arrow -C- to engage.
- Check belt-fastened sensor page 69
-38
.
The anti-twist stop -4- and belt webbing -5-
must not touch or rub against any foam or cover
components.
Anti-twist stop -4- must follow all movements of
belt webbing.
Belt webbing -5- must move freely in all
directions.
Pa
ge 29 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1