AUDI A8 1997 D2 / 1.G 01V Transmission Remove And Install Repair Manual
Page 61 of 64
37-129
Tightening torques for left transmission support Item no.
Bolt
Number
Nm
A M 10 x 30
M 10 x 50 2
1 40
B M 6 x 22 3 10
Tightening torques for right transmission support Item no.
Bolt
Number
Nm
A M 10 x 30 3 40
B M 6 x 22 3 10
Pa
ge 61 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2
Page 62 of 64
37-130
Automatic transmission, transporting
Special tools and equipment
The 3457 attachment and holding rig can be used when transporting the
transmission and for setting up the 3282 transmission support.
3457 attachment and holding rig
- Attach the 3457 attachment and holding rig at the transmission housing
mounts and secure.
Pa
ge 62 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2
Page 63 of 64
37-131
Transmission, attaching to assembly
stand
Special Tools and equipment
3457 attachment and holding rig
VW540 holding fixture (only for transmission
with FWD)
VW313 holding fixture
VW309 holding plate
VAG1202A engine hoist
Pa
ge 63 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2
Page 64 of 64
37-132
For transmissions with Front Wheel Drive (FWD), the VW540 holding
fixture can also be used to secure the transmission to the VW313 holding
fixture. - Attach the 3457 attachment and holding rig at the transmission housing
mounts and secure.
- Bolt the attachment and holding rig to the VW 309 holding plate and
place this into the VW313 holding fixture using a workshop crane.
WARNING!
The center of gravity of the transmission is located outside the
turning center at holding fixture. To turn the transmission, a second
technician must hold the transmission housing to prevent back-
swing.
Note:
Vents for the transmission housing and final drive must be closed before
turning a filled transmission on the assembly stand so that the oil pan
faces upward . - Secure transmission to VW540 holding fixture (arrows) and insert in
VW313 holding fixture.
Pa
ge 64 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2