BMW 5 SERIES 2016 Manual PDF

'yWhen the vehicle is locked using the cenj
tral locking system.'yShortly before the battery is discharged completely, so that the engine can still be
started.
The radio-ready state remains active if, e.g., the ignition is automatically switched off for the following reasons:
'yOpening or closing the driver's door.'yUnfastening of the driver's safety belt.'yWhen automatically switching from low
beams to parking lights.
If the engine is switched off and the ignition is
switched on, the system automatically
switches to the radio-ready state if the lights are turned off or, if correspondingly equipped,the daytime running lights are activated.
Starting
the
engine
Safety
information DANGER
If the exhaust pipe is blocked or ventilaj
tion is insufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases conjtain carbon monoxide, an odorless and colorjless but highly toxic gas. In enclosed areas, exj
haust gases can also accumulate outside of
the vehicle. There is danger to life. Keep the exhaust pipe free and ensure sufficient ventilajtion.'

Engine
stop
Safety
information WARNING
Unattended children or animals can
cause the vehicle to move and endanger themj selves and traffic, e.g., due to the following acj
tions:'yPressing the Start/Stop button.'yReleasing the parking brake.'yOpening and closing the doors or winj
dows.'yEngaging selector lever position N.'yUsing vehicle equipment.
There is a risk of accidents or injuries. Do not leave children or animals unattended in the vej
hicle. Take the remote control with you when exiting and lock the vehicle.'

'yThe selector lever is in selector lever posij
tion D.'yThe brake pedal remains pressed while the vehicle is stationary or the vehicle is held
by Automatic Hold.'yThe driver's safety belt is buckled or the driver's door is closed.
Manual transmission:
'yNeutral is engaged and the clutch pedal is
not pressed.'yThe driver's safety belt is buckled or the driver's door is closed.
The air flow from the air conditioner is reducedwhen the engine is switched off.
Displays
in
the
instrument
cluster The display indicates that theAuto Start/Stop function is
ready for an Automatic engine
start.
The display indicates that the
conditions for an automatic enj gine stop have not been met.
Functional
limitations The engine is not switched off automatically in
the following situations:
'yExternal temperature too low.'yThe external temperature is high and autoj
matic climate control is running.'yThe vehicle's interior has not yet been
heated or cooled to the required level.'yThe engine is not yet at operating temperj ature.'yThe wheels are at a sharp angle or the
steering wheel is being turned.'yAfter driving in reverse.'yFogging of the windows when the autoj matic climate control is switched on.'yVehicle battery is heavily discharged.'yAt higher elevations.'yThe engine compartment lid is unlocked.'yHDC Hill Descent Control is activated.'yThe parking assistant is activated.'yStop-and-go traffic.'ySelector lever in selector lever position N,
M/S or R.'yUse of fuel with high ethanol content.
Starting
the
engine
The engine starts automatically under the foljlowing conditions:
'ySteptronic transmission: by releasing the
brake pedal.
When Automatic Hold is activated: press the accelerator pedal.'yManual transmission: clutch pedal is
pressed.
After the engine starts, accelerate as usual.
Safety
mode
After the engine switches off automatically, it will not start again automatically if any one of the following conditions are met:
'yThe driver's safety belt is unbuckled and
the driver's door is open.'yThe hood was unlocked.
Some indicator lights light up for a varied length of time.
The engine can only be started via the Start/
Stop button.
Functional
limitations
Even if driving off was not intended, the deactij vated engine starts up automatically in the folj
lowing situations:
'yExcessive warming of the vehicle's interior
when the cooling function is switched on.Seite 73DrivingControls73
Online Edition for Part no. 01 40 2 972 586 - VI/16

'yThe steering wheel is turned.'ySteptronic transmission: change from sejlector lever position D to R, N or M/S.'ySteptronic transmission: change from sejlector lever position P to N, D, R or M/S.'yThe vehicle begins rolling.'yFogging of the windows when the autojmatic climate control is switched on.'yVehicle battery is heavily discharged.'yExcessive cooling of the vehicle's interior
when the heating is switched on.'yLow brake vacuum pressure; this can ocj
cur, e.g., if the brake pedal is depressed a
number of times in succession.
Activating/deactivating
the
system
manually
Using
the
button
Press button.
'yLED comes on: Auto Start/Stop function is
deactivated.
The engine is started during an automatic engine stop.
The engine can only be stopped or started via the Start/Stop button.'yLED goes out: Auto Start/Stop function is
activated.Switching
off
the
vehicle
during
an
automatic
engine
stop
During an automatic engine stop, the vehicle
can be switched off permanently, e.g., when
leaving it.
Steptronic transmission:1.Press the Start/Stop button. The ignition is switched off. The Auto Start/Stop functionis deactivated.
Selector lever position P is engaged autoj
matically.2.Set the parking brake.
Manual transmission:
1.Press the Start/Stop button. The ignition is switched off. The Auto Start/Stop functionis deactivated.2.Shift into first gear or reverse.3.Set the parking brake.
Engine start as usual via Start/Stop button.
Automatic
deactivation
In certain situations, the Auto Start/Stop funcj
tion is deactivated automatically for safety reaj sons, e.g., if no driver is detected.
Malfunction The Auto Start/Stop function no longer
switches off the engine automatically. A Check Control message is displayed. It is possible to
continue driving. Have the system checked by
a dealerss service center or another qualified
service center or repair shop.
Parking
brake Concept
The parking brake is used to prevent the vehij cle from rolling when it is parked.
Seite 74ControlsDriving74
Online Edition for Part no. 01 40 2 972 586 - VI/16

Safety
informationWARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acj
cident. Before exiting, secure the vehicle
against rolling.
In order to ensure that the vehicle is secured against rolling away, observe the following:'ySet the parking brake.'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel chock.'

'yDrive mode engaged.'yDriver buckled in and doors closed.
Automatic
release
in
cars
with
manual
transmission
Drive off as usual. The parking brake disenj gages when the clutch pedal is released.
The LED and indicator lamp go out.
Under the following conditions, the parking
brake is automatically released:
'yEngine on.'yGear engaged.'yDriver buckled in and doors closed.'yEngine power is sufficient to drive off.
Automatic
Hold
Concept
This system assists the driver by automatically
setting and releasing the brake, such as when
moving in stop-and-go traffic.
The vehicle is automatically held in place when
it is stationary.
On inclines, the system prevents the vehicle
from rolling backward when driving off.
Overview
Automatic Hold
Safety
information WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acj
cident. Before exiting, secure the vehicle
against rolling.
In order to ensure that the vehicle is secured against rolling away, observe the following:'ySet the parking brake.'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel chock.'

The LED and the letters AUTO H go out.
Automatic Hold is deactivated.
If the vehicle is being held by Automatic Hold, press on the brake pedal to deactivate it.
When the parking brake is set manually, Autoj matic Hold is deactivated automatically.
Driving Automatic Hold is activated: the vehicle is auj
tomatically secured against rolling after brakj ing to a standstill.
The indicator lamp lights up green.
Step on the accelerator pedal to drive
off.
The brake is released automatically.
The indicator lamp goes out.
NOTE
If the vehicle is stationary, Automatic
Hold engages the parking brake. It prevents
the vehicle from rolling in a vehicle wash.
There is a risk of property damage. Deactivate
Automatic Hold prior to entering the vehicle wash.'

Turn
signal,
high
beams,
headlight
flasher
Turn
signal
Turn
signal
in
exterior
mirror
When driving and during operation of the turn signals or hazard warning system, do not foldin the exterior mirrors, so that the signal lightson the exterior mirror are easy to see.
Using
turn
signals
Press the lever beyond the resistance point. The lever returns into its starting position after
actuation.
To switch off manually, slightly tap the lever to the resistance point.
Triple
turn
signal
activation
Lightly tap the lever up or down.
The turn signal flashes three times.
The function can be activated or deactivated.
On the Control Display:
1."Settings"2."Lighting"3."Triple turn signal"
Settings are stored for the profile currently used.
Signaling
briefly
Press the lever to the resistance point and hold
it there for as long as you want the turn signal to flash.
Malfunction Unusually rapid flashing of the indicator lamp
indicates that a turn signal bulb has failed.
High
beams,
headlight
flasher Push the lever forward or pull it backward.'yHigh beams, arrow 1.'yHigh beams off/headlight flasher, arrow 2.
Washer/wiper
system
General
information
Do not use the wipers if the windshield is dry, as this may damage the wiper blades or causethem to become worn more quickly.
Safety
information NOTE
If the wipers are frozen to the windshield,
the wiper blades can be torn off and the wiper
motor can overheat when switching on. There
is a risk of property damage. Defrost the windj
shield prior to switching the wipers on.'

Switching
on
Tap the lever up or press it beyond the resistj
ance point.
'yNormal wiper speed: tap up once.
The wipers switch to intermittent operation
when the vehicle is stationary.'yFast wiper speed: tap up twice or tap once beyond the resistance point.
Wipers change to normal speed when vej
hicle comes to standstill.
The lever automatically returns to its initial poj
sition when released.
Switching
off
and
brief
wipe
Press the lever down.
'yTo switch off from fast wiper speed: pressdown twice.'yTo switch off from normal wiper speed:
press down once.'ySingle wipe: press down once.
The lever automatically returns to its initial poj
sition when released.
Interval
mode
or
rain
sensor
Concept
The rain sensor automatically controls the time between wipes depending on the intensity ofthe rainfall.
General
information
The sensor is located on the windshield, dij
rectly in front of the interior mirror. Without the
rain sensor, the frequency of the wiper operaj
tion is preset.
Safety
information NOTE
If the rain sensor is activated, the wipers
can accidentally start moving in vehicle
washes. There is a risk of property damage. Deactivate the rain sensor in vehicle washes.'

Setting
the
frequency
or
sensitivity
of
the
rain
sensor
Turn the thumbwheel to adjust the frequency
or sensitivity of the rain sensor.
Up: short interval or high sensitivity of the rain
sensor.
Down: long interval or low sensitivity of the rain
sensor.
Windshield
and
headlamp
washer
system
Safety
information WARNING
The washer fluid can freeze onto the winj
dow at low temperatures and obstruct the
view. There is a risk of an accident. Only use
the washer systems, if the washer fluid cannot
freeze. Use antifreeze, if needed.'