pressure BMW IX 2022 Owners Manual

Harder vehicle deceleration
In certain situations, it can be necessary to
bring the vehicle to a halt more quickly than with automatic brake actuation.
To do this, quickly apply extra force to the
brake. For a brief period, the brake pressure
will be higher than the brake pressure that is
achieved by the automatic braking function.
Automatic brake actuation is interrupted.
Canceling automatic braking
It can be necessary to interrupt automatic braking in certain situations, for instance for anevasive maneuver.
Canceling automatic braking:

Press the button.
Changing the speed Press the corresponding button untilthe set speed is set.
If active, the displayed speed is stored
and the vehicle reaches the stored speed when the road is clear.
The maximum speed that can be set depends on the vehicle.
Pressing the button to the resistance point and holding it: vehicle accelerates or decelerates
without pressure on the accelerator pedal.
After the rocker switch is released, the vehicle
maintains its final speed. Pressing the switch beyond the resistance point causes the vehicleto accelerate more rapidly.
Continuing cruise control
At the stored speed An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current speed and stored speed is not too large beforecalling up the stored speed. Otherwise, unin

3."Driving settings"4."Driver Assistance"5."Driving"6."Assisted Driving"7."Automatic Lane Change"
Changing lanes
1.Ensure that the traffic situation permits
changing lanes.2.Press the turn signal lever in the required
direction to the pressure point for signaling briefly.
Supporting steering movement in the de

Checking using tire inflation pressure
specifications in the tire inflation
pressure table1.Determine the intended tire inflation pres

Tire pressure values up to 100 mph/
160 km/h
iX xDrive40, iX xDrive50Tire sizePressure specifications
in bar/PSISpecifications in
bar/PSI with cold
tires255/50 R 21 109
Y XL
255/50 R 21 109
H XL A/S
255/50 R 21 109
H XL M+S2.5 / 363.0 / 44235/60 R 20 108
H XL A/S
235/60 R 20 108
H XL
235/60 R 20 108
H XL M+S2.6 / 383.1 / 45275/40 R 22 107
Y XL2.7 / 393.2 / 46iX M60Tire sizePressure specifications in
bar/PSISpecifications
in bar/PSI with
cold tires255/50 R 21 109
H XL A/S
255/50 R 21 109
Y XL
255/50 R 21 109
H XL M+S2.5 / 363.0 / 44275/40 R 22
107 Y XL2.7 / 393.2 / 46
Tire inflation pressures at max.
speeds above 100 mph/160 km/h
Warning
In order to drive at maximum speeds in ex

Tire pressure values over 100 mph/
160 km/h
iX xDrive40, iX xDrive50Tire sizePressure specifications
in bar/PSISpecifications in
bar/PSI with cold
tires255/50 R 21 109
Y XL2.5 / 363.0 / 44255/50 R 21 109
H XL A/S
255/50 R 21 109
H XL M+S2.8 / 413.3 / 48235/60 R 20 108
H XL A/S
235/60 R 20 108
H XL
235/60 R 20 108
H XL M+S2.9 / 423.4 / 49275/40 R 22 107
Y XL2.7 / 393.2 / 46iX M60Tire sizePressure specifications in
bar/PSISpecifications
in bar/PSI with
cold tires255/50 R 21 109
H XL A/S
255/50 R 21 109
Y XL
255/50 R 21 109
H XL M+S2.8 / 413.3 / 48275/40 R 22
107 Y XL2.9 / 423.4 / 49
Tire marking
Tire size
245/45 R 18 96 Y
245: nominal width in mm
45: cross

Safety information
Warning
The display of the target pressures is not a substitute for the tire inflation pressure de

3."Live Vehicle"4."Content"5."Vehicle status"6."Tire Pressure Monitor"7.Make sure that correct tire settings havebeen made.
Tire settings, refer to page 315.8.Turn on drive

If there is a significant tire pressure
loss
Message A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with the affected tire ap

MalfunctionMessage The yellow warning light flashes and is
then illuminated continuously. A Check
Control message is displayed. It may
not be possible to identify tire pressure losses.
Measure