BMW X2 2018 Owners Manual

Steering
wheel
Safety
information
WARNING
Steering wheel adjustments while driving can
lead to unexpected steering wheel movements.
Vehicle control could be lost. There is a risk of an accident. Adjust the steering wheel whilethe vehicle is stationary only.
Settings
1.Fold the lever down.2.Move the steering wheel to the preferred
height and angle to suit your seating position.3.Fold the lever back up.
Heated
steering
wheel
Overview
Heated steering wheel
Switching
on/off Press button.'xOn: the LED lights up.'xOff: the LED goes out.Seite 101Seats

mirrors

and
steering
wheelCONTROLS101
Online Edition for Part no. 01402989448 - II/18

Transporting
children
safelyVehicle
features
andoptions
This chapter describes all standard, country-spejcific and optional features offered with the series.
It also describes features that are not necessarily available in your vehicle, e. g., due to the selectedoptions or country versions. This also applies to
safety-related functions and systems. When usj
ing these functions and systems, the applicable laws and regulations must be observed.
The
right
place
for
children
Safety
information
WARNING
Unattended children or animals can cause the
vehicle to move and endanger themselves and
traffic, for instance due to the following actions:
'xPressing the Start/Stop button.'xReleasing the parking brake.'xOpening and closing the doors or winj
dows.'xEngaging selector lever position N.'xUsing vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the vej hicle. Take the remote control with you when
exiting and lock the vehicle.
Always
transport
children
in
the
rear
seat
General
information
Accident research shows that the safest place for children is in the rear seat.
Transport children younger than 13 years of age
or shorter than 5 ft/150 cm only in the rear seat
in suitable child restraint systems designed for
the age, weight and size of the child. Children
13 years of age or older must wear a safety belt
as soon as a suitable child restraint system can no longer be used due to their age, weight, and
size.
Safety
information
WARNING
The safety belt cannot be fastened correctly on
children shorter than 5 ft, 150 cm without suitaj
ble additional child restraint systems. The effij
cacy of safety gear, including safety belts, can be limited or lost when safety belts are fasjtened incorrectly. An incorrectly fastened safetybelt can cause additional injuries, for instance in
the event of an accident or during braking and evasive maneuvers. There is a risk of injuries or
danger to life. Secure children shorter than 5 ft,
150 cm using suitable child restraint systems.
Children
on
the
front
passenger
seat
General
information Should it ever be necessary to use a child rej
straint system in the front passenger seat, make
sure that the front, knee and side airbags on the front passenger side are deactivated. Automatic
deactivation of front-seat passenger airbags, rej fer to page 152.
Seite 102CONTROLSTransporting
children
safely102
Online Edition for Part no. 01402989448 - II/18

Safety
information
WARNING
Active front-seat passenger airbags can injure a
child in a child restraint system when the airj bags are activated. There is a risk of injury.
Make sure that the front-seat passenger airj
bags are deactivated and that the PASSENj
GER AIRBAG OFF indicator light lights up.
WARNING
The stability of the child restraint system is limj
ited or compromised with incorrect seat adjustj
ment or improper installation of the child seat.
There is a risk of injuries or danger to life. Make sure that the child restraint system fits securelyagainst the backrest. If possible, adjust the
backrest tilt for all affected backrests and corj
rectly adjust the seats. Make sure that seats
and backrests are securely engaged or locked.
If possible, adjust the height of the head rej
straints or remove them.
Installing
child
restraint
systems
General
information Pay attention to the specifications of the child rej
straint system manufacturer when selecting, inj
stalling, and using child restraint systems.
Safety
information
WARNING
The stability of the child restraint system is limj
ited or compromised with incorrect seat adjustj ment or improper installation of the child seat.
There is a risk of injuries or danger to life. Make sure that the child restraint system fits securelyagainst the backrest. If possible, adjust the
backrest tilt for all affected backrests and corj
rectly adjust the seats. Make sure that seats and backrests are securely engaged or locked.
If possible, adjust the height of the head rej
straints or remove them.
WARNING
The protective effect of damaged child restraint
systems or of child restraint systems exposed
to an accident and their fastening systems can
be limited or lost. A child can e.g.,not suffij
ciently restrained, for instance in the event of
an accident or braking and evasive maneuvers.
There is a risk of injuries or danger to life. Have
damaged child restraint systems or of child rej
straint systems exposed to an accident and
their fastening systems checked and possibly
replaced by the dealerss service center or anj other qualified service center or repair shop.
On
the
front
passenger
seat
Deactivating
airbags
WARNING
Active front-seat passenger airbags can injure a child in a child restraint system when the airj
bags are activated. There is a risk of injury.
Make sure that the front-seat passenger airj
bags are deactivated and that the PASSENj
GER AIRBAG OFF indicator light lights up.
After installing a child restraint system in the
front passenger seat, make sure that the front,
knee and side airbags on the front passenger
side are deactivated.
Deactivate the front-seat passenger airbags auj
tomatically, refer to page 152.
Seat
position
and
height Before installing a child restraint system, move
the front passenger seat as far back as possible
Seite 103Transporting
children
safelyCONTROLS103
Online Edition for Part no. 01402989448 - II/18

and bring it as far up as possible to obtain the
best possible position for the belt and to offer
optimal protection in the event of an accident.
If the upper anchorage of the safety belt is loj cated in front of the belt guide of the child seat,
move the front passenger seat carefully forward
until the best possible belt guide position is
reached.
Backrest
width Adjustable backrest width: before installing a
child restraint system in the front passenger seat,
open the backrest width completely. Do not
change the backrest width again and do not call up a memory position.
Child
seat
security
The rear safety belts and the front passenger
safety belt can be permanently locked to fasten child restraint systems.
Locking
the
safety
belt
1.Pull out the belt strap completely.2.Secure the child restraint system with the
safety belt.3.Allow the belt strap to be pulled in and pull it
tight against the child restraint system. The
safety belt is locked.
Unlocking
the
safety
belt
1.Unbuckle the safety belt buckle.2.Remove the child restraint system.3.Allow the belt strap to be pulled in comj
pletely.
In some cases it may be necessary to separate
the lower belt attachment. Safety belts, refer to page 95.
LATCH
child
restraint
fixing system
General
information LATCH: Lower Anchors and Tether for Children.
Pay attention to the operating and safety inforj
mation of the child restraint system manufacturer
when installing and using LATCH child restraint
fixing systems.
Mounts
for
the
lower
LATCH
anchors
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child is
restrained by the internal harnesses.
Safety
information
WARNING
If the LATCH child restraint fixing systems are not correctly engaged, the protective effect of
the LATCH child restraint fixing system can be
limited. There is a risk of injuries or danger to
life. Make sure that the lower anchors are sej
curely engaged and that the LATCH child rej
straint fixing system fits securely against the
backrest.
Seite 104CONTROLSTransporting
children
safely104
Online Edition for Part no. 01402989448 - II/18

PositionSymbolMeaningThe corresponding symbol
shows the mounts for the lower
LATCH anchors.
Seats equipped with lower anj
chors are marked with a pair, 2,
of LATCH symbols.
For vehicles equipped with a
middle seat:
It is not recommended to use
the inner lower anchors of
standard outer LATCH positions
to fasten a child restraint system
on the middle seat. Use the vej
hicle safety belt instead for the
middle seat.
Before
installing
LATCH
child
restraint
fixing
systems
Pull the safety belt away from the area of the
child restraint system.
Assembly
of
LATCH
childrestraint
fixing
systems
1.Install child restraint system, see manufacturj
er's information.2.Ensure that both LATCH anchors are propj erly connected.Child
restraint
systems
with
tether
strap
Safety
information
WARNING
If the upper retaining strap is incorrectly used for the child restraint system, the protective efj fect can be reduced. There is a risk of injury.Make sure that the upper retaining strap is not
guided across sharp edges and without twistj ing to the upper retaining strap.
WARNING
If the rear backrest is not locked, the protective
effect of the child restraint system is limited or there is none. In particular situations, for injstance braking maneuvers or in case of an accijdent, the rear backrest can fold forward. There
is a risk of injuries or danger to life. Make sure
that the rear backrests are locked.
NOTE
The anchors for the upper retaining straps of
child restraint systems are only provided for
these retaining straps. When other objects are
mounted, the anchors can be damaged. There
is a risk of damage to property. Only mount
child restraint systems to the upper retaining straps.
Anchors
The respective symbol shows the anchorfor the upper retaining strap. Seats withan upper top tether are marked with this
symbol. It can be found on the rear seat backrest
or the rear window shelf.
Seite 105Transporting
children
safelyCONTROLS105
Online Edition for Part no. 01402989448 - II/18

Routing
the
retaining
strap1Direction of travel2Head restraint3Hook for upper retaining strap4Anchor5Seat backrest6Upper retaining strap
Attaching
the
upper
retaining
strap
to
the
anchor
1.Raise the head restraint, if needed.2.Guide the upper retaining strap between or
along both sides of the supports of the head restraint to the anchor.3.If there is a retaining strap, run it between the
backrest and the cargo cover.4.Attach the hook of the retaining strap to the
anchor.5.Tighten the retaining strap by pulling it down.6.Lower and lock head restraints as needed.Locking
the
doors
and
windows
in
the
rear
Rear
doors
Push the locking lever on the rear doors up.
The door can now be opened from the outside
only.
Safety
switch
for
the
rear Press button on the driver's door.
The LED lights up if the safety function
is switched on.
This locks various functions so that they cannot
be operated from the rear.
Seite 106CONTROLSTransporting
children
safely106
Online Edition for Part no. 01402989448 - II/18

DrivingVehicle
features
andoptions
This chapter describes all standard, country-spejcific and optional features offered with the series. It also describes features that are not necessarilyavailable in your vehicle, e. g., due to the selectedoptions or country versions. This also applies to
safety-related functions and systems. When usj
ing these functions and systems, the applicable laws and regulations must be observed.
Start/Stop
button
Concept Pressing the Start/Stop buttonswitches the ignition on or off and starts the engine.
Steptronic transmission: the enj
gine starts with the brake pedal
pressed when you press the Start/Stop button.
Ignition
on Steptronic transmission: press the Start/Stop
button, and do not press on the brake pedal at the same time.
All vehicle systems are ready for operation. Most of the indicator/warning lights in the instruj
ment cluster light up for a varied length of time.
To save battery power when the engine is off,
switch off the ignition and any unnecessary elecj
tronic systems/power consumers.
Ignition
off
Steptronic transmission: shift to selector lever
position P, press the Start/Stop button again
without stepping on the brake.
All indicator lights in the instrument cluster go out.
To save battery power when the engine is off,
switch off the ignition and any unnecessary elecj
tronic systems/power consumers.
Safety
measures The ignition is switched off automatically in thefollowing situations while the vehicle is stationary
and the engine is off:'xWhen locking the vehicle, and when the low beams are switched on.'xShortly before the battery is discharged comjpletely, so that the engine can still be started.'xWhen opening or closing the driver door, ifthe driver's safety belt is unbuckled and the
low beams are switched off.'xWhile the driver's safety belt is unbuckled
with driver's door open and low beams off.'xWhen the front doors are opened if there is
no other person sitting in the front seats.
The low beams switch to parking lights after
some minutes of no use.
Steptronic transmission with a tap-operated sej
lector lever, refer to page 121: when switching
off the ignition, the selector lever position P is
engaged automatically if the selector lever posij tion R, D or M/S is engaged.
Radio-ready
state
General
information
In the radio-ready state, certain power consumj
ers remain ready for operation.
ActivatingWith the engine running, press the Start/Stop
button.
Seite 107DrivingCONTROLS107
Online Edition for Part no. 01402989448 - II/18

If the engine is not running and the ignition isswitched on: the system automatically activates
radio-ready state when the door is opened if the
lights are switched off or the daytime running lights are switched on.
The radio-ready state remains active if, for inj
stance the ignition is automatically switched off
for the following reasons:'xOpening or closing the driver's door.'xUnfastening of the driver's safety belt.'xWhen automatically switching from low beams to parking lights.
Switching
off
automatically
The radio-ready state is switched off automatijcally in the following situations:
'xIf the driver's or front passenger door isopened when exiting the vehicle, with the enjgine switched off manually.'xIf the ignition is switched off manually withthe Start/Stop button.'xAfter approx. 8 minutes.'xWhen the vehicle is locked using the centrallocking system.'xShortly before the battery is discharged comjpletely, so that the engine can still be started.
Starting
the
engine
Safety
information
DANGER
If the exhaust pipe is blocked or ventilation is inj
sufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases contain polluj
tants which are colorless and odorless. In enj
closed areas, exhaust gases can also accumuj
late outside of the vehicle. There is danger to
life. Keep the exhaust pipe free and ensure sufj
ficient ventilation.
WARNING
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of an accident.
Before exiting, secure the vehicle against rollj
ing.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
'xSet the parking brake.'xOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'xOn uphill grades or on a downhill slope, also secure the vehicle, for instance with awheel chock.
NOTE
In the case of repeated starting attempts or rej peated starting in quick succession, the fuel is
not burned or is inadequately burned. The cataj
lytic converter can overheat. There is a risk of
damage to property. Avoid repeated starting in quick succession.
Gasoline
engine
Depending on the motorization, the full drive
power may not be available for approximately
30 seconds after starting the engine. In this case,
the vehicle will not accelerate as usual.
Steptronic
transmission Starting
the
engine
1.Depress the brake pedal.2.Press the Start/Stop button.
The ignition is activated automatically for a brief
time and is stopped as soon as the engine starts.
Seite 108CONTROLSDriving108
Online Edition for Part no. 01402989448 - II/18

Engine
stop
Safety
information
WARNING
Unattended children or animals can cause the
vehicle to move and endanger themselves and
traffic, for instance due to the following actions:
'xPressing the Start/Stop button.'xReleasing the parking brake.'xOpening and closing the doors or winj
dows.'xEngaging selector lever position N.'xUsing vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the vej hicle. Take the remote control with you whenexiting and lock the vehicle.
WARNING
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of an accident.
Before exiting, secure the vehicle against rollj
ing.
In order to ensure that the vehicle is secured against rolling away, follow the following:
'xSet the parking brake.'xOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the curb.'xOn uphill grades or on a downhill slope,
also secure the vehicle, for instance with a
wheel chock.
Steptronic
transmission
Switching
off
the
engine
1.When the vehicle is stationary, apply the parking brake.2.Engage selector lever position P.3.Press the Start/Stop button.
The engine is switched off.
The radio-ready state is switched on.
Auto
Start/Stop
function
Concept
The Auto Start/Stop function helps save fuel.
The system switches off the engine during a stop, for instance in traffic congestion or at traffic
lights. The ignition remains switched on. The enj gine starts automatically for driving off.
General
information After each engine start using the Start/Stop butj
ton, the Auto Start/Stop function is ready.
The function is activated from speeds of approx.3 mph/5 km/h.
Depending on the selected driving mode, the system is automatically activated or deactivated.
Engine
stop Functional
requirementsThe engine is switched off automatically during a
stop under the following conditions:
Steptronic transmission:
'xThe selector lever is in selector lever position D.'xThe brake pedal remains depressed while thevehicle is stopped.'xThe driver's safety belt is buckled or the drivjer's door is closed.
In order to be able to release the brake pedal, enjgage the selector lever in position P. The engineremains off.
To continue driving depress the brake pedal.
When a gear is engaged, the engine starts autoj
matically.
Seite 109DrivingCONTROLS109
Online Edition for Part no. 01402989448 - II/18

The air flow from the air conditioner is reduced
when the engine is switched off.
Displays
in
the
instrument
cluster The READY display in the tachjometer signals that the AutoStart/Stop function is ready tostart the engine automatically.
The display indicates that the
conditions for an automatic enj
gine stop have not been met.
Functional
limitations The engine is not switched off automatically in
situations such as the following:'xIn case of a steep downhill grade.'xExternal temperature too low.'xThe external temperature is high and autoj
matic climate control is running.'xThe car's interior has not yet been heated or cooled to the required level.'xThe engine is not yet at operating temperaj
ture.'xThe wheels are at a sharp angle or the steerj ing wheel is being turned.'xAfter driving in reverse.'xWhere there is a risk of window condensation
when the automatic climate control is
switched on.'xVehicle battery is heavily discharged.'xAt higher elevations.'xThe hood is unlocked.'xHDC Hill Descent Control is activated.'xThe parking assistant is activated.'xStop-and-go traffic.'xSelector lever in selector lever position N,
M/S or R.'xUse of fuel with high ethanol content.Starting
the
engine
The engine starts automatically under the followj
ing conditions:'xSteptronic transmission: by releasing the
brake pedal.
After the engine starts, accelerate as usual.
Safety
mode
After the engine switches off automatically, it will not start again automatically if any one of the folj
lowing conditions are met:
'xThe driver's safety belt is unbuckled and the
driver's door is open.'xThe hood was unlocked.
Some indicator lights light up for a varied length of time.
The engine can only be started via the Start/Stop
button.
Functional
limitations
Even if driving off was not intended, the deactij
vated engine starts up automatically in the folj lowing situations:
'xExcessive warming of the car's interior when
the air conditioning is switched on.'xThe steering wheel is turned.'xSteptronic transmission: change from selecj
tor lever position D to R, N or M/S.'xSteptronic transmission: change from selecj
tor lever position P to N, D, R or M/S.'xWhere there is a risk of window condensation
when the automatic climate control is
switched on.'xVehicle battery is heavily discharged.'xExcessive cooling of the car's interior when
the heating is switched on.Seite 110CONTROLSDriving110
Online Edition for Part no. 01402989448 - II/18