parking brake CITROEN C-ELYSÉE 2017 User Guide

76
C-elysee_en_Chap05_conduite_ed01-2016
Invalid value during manual
operation
This symbol is displayed if a gear is   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
Before switching off the engine, you can engage   position   P or N   to   place   the   gearbox   in  
neu

tral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle.
Operating fault
and a message in the multifunction screen, indicates   a   gearbox   fault.
In
  this   case,   the   gearbox   switches   to   back-up  
m

ode   and   is   locked   in   3rd   gear.   You   may   feel  
a

  substantial   knock   when   changing   from   P
to R
  and   from   N to R.
  This   will   not   cause   any  
d

amage   to   the   gearbox.
Do
  not   exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   as   soon   as   possible. There
  is   a   risk   of   damage   to   the  
g

earbox:
-  i f   you   press   the   accelerator   and  b
rake   pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery is
flat.
To
  reduce   fuel   consumption   when   at  
a

  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the N   position   and   apply   the   parking  
b

rake.
If the selector is not in position P ,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the selector to position P ;
 
t

he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace. When
  the   ignition   is   on,   the  
l

ighting   of   this   warning   lamp,  a
ccompanied   by   an   audible   signal  
Driving

77
C-elysee_en_Chap05_conduite_ed01-2016
Automatic gearbox (EAT6)
Six-speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration,   enhanced   by   sport   and   snow  
p

rogrammes,
 o
r
 m
anual
 g
ear
 c
hanging.
Two
  driving   modes   are   available:
-
 
a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,  
w

ith the sport
 
programme   for   a   more  
d

ynamic   driving   style   or   the   snow
programme
  to   improve   driving   on   slippery  
su

rfaces,
-
 
m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver. P.
 

Park.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
 

Neutral.
-
 
I
mmobilisation   of   the   vehicle,   parking  
b

rake on.
-
 
S
tarting   the   engine.
D.
 A

utomatic
 ope
ration.
M + / -.
  
M
anual   operation   with   sequential  
c

hanging   of   the   six   gears.
F
 
P
ush   for ward   to   change   up   through  
t

he gears.


or
F

 
P
ull   backward   to   change   down   through   the  
g

ears.Gear selector positions
When you move the selector to select a position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.


Reverse
N.
N

eutral
D.
 D

rive
 (
Automatic
 ope
ration)
S.
Sp

ort
 pro
gramme.
T .

S
now
 pro
gramme.
1 2 3 4 5 6.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
Displays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
Gear selector gate
1. Gear  selector.
2. " S "
(spor t)  button.
3.


"T " (snow)
 

button.
5
Driving

78
C-elysee_en_Chap05_conduite_ed01-2016
When the engine is running at idle, with the   brakes   released,   if   position   R, D or
M
  is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When
  the   engine   is   running,   never  
l

eave   children   in   the   vehicle   without  
sup

ervision.
When
  carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P.
If position N
 
is
 
selected
 
inadvertently
 
w

hile
 
driving,
 
allow
 
the
 
engine
 
to
 
return
 
t

o
 
idle
 
then
 
select
 
position
 
D before
accelerating.
If
 
the
 
ambient
 
temperature
 
is
 
below
 
-

23°C,
 
the
 
engine
 
should
 
be
 
left
 
at
 
idle
 
f

or
 
four
 
minutes,
 
to
 
ensure
 
the
 
correct
 
o

peration
 
and
 
life
 
of
 
the
 
engine
 
and
 
g

earbox.
Moving off
F Apply   the   parking   brake.
F Sel ect position P or N .
F
 
S
tart   the   engine.
If
  these   conditions   are   not   met,   there   is   an  
a

udible   signal,   accompanied   by   the   display   of  
a

n   warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R
elease   the   parking   brake.
F

Sel
ect position R , D or M.
F
 
G
radually   release   the   brake   pedal.
The
  vehicle   moves   off   immediately.
Driving

79
C-elysee_en_Chap05_conduite_ed01-2016
Never select position N while the
vehicle  is   moving.
Never select positions P or R unless the
vehicle
  is   completely   stationary.
Automatic operation
Reverse
When selecting reverse R   with   the   ignition   on,  t
he   rear   parking   sensors   are   activated.
For
  more   information,   refer   to   the   "Rear   parking  
sen

sors"
 se
ction.
Creep function (moving without
using the accelerator)
This function provides great flexibility in manoeuvring   the   vehicle   at   low   speed   (when  
p

arking,   in   traffic   jams,   …).
With
  the   engine   at   idle,   parking   brake   released  
a

nd   position   D, M or R
 
s
elected,
 t
he vehicle
moves
 

as   soon   as   you   take   your   foot   off  
t

he   brake   pedal   (even   without   pressing   the  
a

ccelerator)..
F

Sel

ect position D for automatic
 c

hanging
 o

f
 
the
 
six
 
gears.
The
 
gearbox
 
then
 
operates
 
in
 
auto-adaptive
 
m

ode,
 
without
 
any
 
intervention
 
on
 
the
 
part
 
o

f
 
the
 
driver.
 
It
 
continuously
 
selects
 
the
 
m

ost
 
suitable
 
gear
 
according
 
to
 
the
 
style
 
of
 
d

riving,
 
the
 
profile
 
of
 
the
 
road
 
and
 
the
 
load
 
in
 
t

he vehicle.
For
 
maximum
 
acceleration
 
without
 
touching
 
t

he
 
selector,
 
press
 
the
 
accelerator
 
pedal
 
down
 
f

ully
 
(kick
 
down).
 
The
 
gearbox
 
changes
 
down
 
a

utomatically
 
or
 
maintains
 
the
 
gear
 
selected
 
u

ntil
 
the
 
maximum
 
engine
 
speed
 
is
 
reached.
On
 
braking,
 
the
 
gearbox
 
changes
 
down
 a
utomatically
 
to
 
provide
 
efficient
 
engine
 b
raking.
As
 
a
 
safety
 
measure,
 
if
 
you
 
release
 
the
 
a

ccelerator
 
sharply,
 
the
 
gearbox
 
will
 
not
 
c

hange
 
up. These
  two   special   programmes   complete  
t

he   automatic   operation,   for   use   in   particular  
c

ircumstances.
Sport and snow programmes
"S" sport programme
F Press the "
S"   button,   once   the   engine   has  s
tarted.
The
  gearbox   automatically   allows   a   more  
d

ynamic   driving   style.
T snow programme
F Press the "T"   button,   once   the   engine   has  s
tarted.
The
  gearbox   adapts   itself   to   driving   on   slippery  
r

oads.
This
  programme   helps   moving   off   and   improves  
t

raction   when   grip   is   poor.
At
  any   time,   press   the   button   selected  
a

gain   to   leave   the   programme   engaged  
a

nd   return   to   auto-adaptative   mode.
S
  appears   in   the   instrument   panel.
T   appears   in   the   instrument   panel.
5
Driving

80
C-elysee_en_Chap05_conduite_ed01-2016
There is a risk of damage to the gearbox:
-
 
i
f   you   press   the   accelerator   and  
b

rake   pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery is
discharged.
If the selector is not in position P
,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the selector to position P ;
 
t

he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace. To
  reduce   fuel   consumption   when   at  
a

  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the N   position   and   apply   the   parking  
b

rake.
Manual operation
Invalid value during manual
operation
Stopping the vehicle
Before switching off the engine, you can e ngage   position   P or N   to   place   the   gearbox   in  
neu

tral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle.
Operating fault
F Select position M for sequential c hanging o
f   the   six   gears.
F
 
M
ove   the   selector   towards   the   +   sign   to  
c

hange   up   a   gear.
F
 
M
ove   the   selector   towards   the   -   sign   to  
c

hange   down   a   gear.
It
  is   only   possible   to   change   from   one   gear   to  
a

nother   if   the   vehicle   speed   and   engine   speed  
p

ermit;   other wise,   the   gearbox   will   operate  
t

emporarily   in   automatic   mode.
D
  disappears   and   the   gears  
e

ngaged   appear   in   succession   in   the  
in

strument
 pan
el.
If
  the   engine   speed   is   too   low   or   too   high,   the  
g

ear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position   D
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   engages   first   gear  
au

tomatically. With
 t he  i gnition  o n,  i llumination  o f  
t

his   warning   lamp,   accompanied  
b

y   an   audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
  this   case,   the   gearbox   switches   to   back-up  
m

ode   and   is   locked   in   3rd   gear.   You   may   feel  
a

  substantial   knock   when   changing   from   P
to R
  and   from   N to R.
  This   will   not   cause   any  
d

amage   to   the   gearbox.
Do
  not   exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   as   soon   as   possible.
This
  symbol   is   displayed   if   a   gear  
i

s   not   engaged   correctly   (selector  
b

etween   two   positions).
The
  sport   and   snow   programmes   are  
n

ot   available   when   operating   manually.
Driving

82
C-elysee_en_Chap05_conduite_ed01-2016
Stop & Start
Operation
Going into engine STOP mode
The "ECO" warning   lamp   comes  o
n   in   the   instrument   panel   and   the  
e

ngine   goes   into   standby:
-
 
w

ith a 5-speed electronic gearbox , with
the vehicle stationary, when you press
the
 
brake   pedal   or   put   the   gear   selector   in  
p

osition N .
A
 
time
 
counter   calculates   the   sum   of   the  
p

eriods
 
in
  STOP   mode   during   a   journey.   It   rests  
i

tself
 
to
 
zero   every   time   the   ignition   is   switched  
o

n
 
with
 
the   key.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary. Never
  refuel   with   the   engine   in  
S

TOP mode;   you   must   switch   off   the  
i

gnition   with   the   key.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Driving

148
C-elysee_en_Chap09_info-pratiques_ed01-2016
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block   traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake,   switch   off   the  
i

gnition   and   engage   first   gear*   to   block  
t

he   wheels.
Check
  that   the   parking   brake   warning  
l

amp   in   the   instrument   panel   comes   on.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Ensure
  that   the   jack   is   correctly  
p

ositioned   at   one   of   the   vehicle's  
j

acking   points.
Incorrect
  use   of   the   jack   could   cause  
t

he   vehicle   to   drop.
Never
  go   underneath   a   vehicle   raised  
u

sing   a   jack;   use   an   axle   stand.
List of operations
Do not use a jack other than the one supplied   by   the   manufacturer.
*
  
P

osition
 
R
 
for
 
an
 
electronic
 
gearbox;
 
P for an
automatic
 
gearbox.
Wheel with wheel trim
When removing the wheel , first
remove   the   wheel   trim   using   the  
w

heelbrace   1   by   pulling   at   the   valve  
a

perture.
When refitting the wheel , refit the
wheel
  trim,   starting   by   placing   its   cutout  
i

n   line   with   the   valve   and   then   pressing  
r

ound   its   edge   with   the   palm   of   your  
han

d. F
 
R
emove   the   wheel   bolt   cover   using   the  
t

ool 3   (alloy   wheels).
F
 
S
lacken   the   bolts   using   the   wheelbrace 1
o n l y.
Practical information

152
C-elysee_en_Chap09_info-pratiques_ed01-2016
Snow chains
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.Advice on installation
F If   you   have   to   fit   the   chains   during   a  j
ourney,   stop   the   vehicle   on   a   flat   sur face  
o

n   the   side   of   the   road.
F
 
A
pply   the   parking   brake   and   position   any  
w

heel   chocks   to   prevent   movement   of   your  
v

ehicle.
F
 
F
it   the   chains   following   the   instructions  
p

rovided   by   the   manufacturer.
F
 
M
ove   off   gently   and   drive   for   a   few  
m

oments,   without   exceeding   30   mph  
(

50 km/h).
F
 
S
top   your   vehicle   and   check   that   the   snow  
c

hains   are   correctly   tightened.
Use
 
only
 
the
 
chains
 
designed
 
to
 
be
 
fitted
 
to
 
the
 
t

ype
 
of
 
wheel
 
fitted
 
to
 
your
 
vehicle:
Original
 
t

yre size Maximum
 
l

ink
 
size.
185/65
 
R15 9
 
mm
195/55
 
R16
For
 
more
 
information
 
on
 
snow
 
chains,
 
contact
 
a
 
C

ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
It
 
is
 
strongly
 
recommended
 
that
 
before
 
y

ou
 
leave,
 
you
 
practise
 
fitting
 
the
 
snow
 
c

hains
 
on
 
a
 
level
 
and
 
dry
 
sur face. Avoid
  driving   with   snow   chains   on   roads  
t

hat   have   been   cleared   of   snow,   to  
a

void   damaging   your   vehicle's   tyres   and  
t

he   road   sur face.   If   your   vehicle   is   fitted  
w

ith   alloy   wheels,   check   that   no   part   of  
t

he   chain   or   its   fixings   is   in   contact   with  
t

he   wheel   rim.
Take
 
account
 
of
 
the
 
legislation
 
in
 
force
 
i

n your country on the use of snow
chains
 
and
 
the
 
maximum
 
running
 
speed
 
a

uthorised.
The
 
snow
 
chains
 
must
 
be
 
fitted
 
only
 
t

o
 
the
 
front
 
wheels.
 
They
 
must
 
never
 
b

e
 
fitted
 
to
 
"space-saver"
 
type
 
spare
 
w

heels.
Practical information

170
C-elysee_en_Chap09_info-pratiques_ed01-2016
Towing the vehicle
Access to the tools
The towing eye is installed in the boot under the   floor.
To
  gain   access   to   it:
F

o
pen the boot,
F
 
l
ift   the   floor   and   remove   it,
F
 
r
emove   the   towing   eye   from   the   holder.
General recommendations
Observe the legislation in force in your country.
E nsure   that   the   weight   of   the   towing   vehicle   is   higher   than   that   of   the   towed   vehicle.
The
  driver   must   remain   at   the   wheel   of   the   towed   vehicle   and   must   have   a   valid   driving  
l

icence.
When
  towing   a   vehicle   with   all   four   wheels   on   the   ground,   always   use   an   approved   towing  
a

rm;   rope   and   straps   are   prohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine   off,   there   is   no   longer   any   power   assistance   for  
b

raking   or   steering.
In
  the   following   cases,   you   must   always   call   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or   fast   road,
-
 
f
our-wheel   drive   vehicle,
-
 
w
hen   it   is   not   possible   to   put   the   gearbox   into   neutral,   unlock   the   steering,   or   release  
t

he   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the   ground,
-
 
w
here   there   is   no   approved   towing   arm   available...
Procedure
 
for
 
having
 
your
 
vehicle
 
towed.
Practical information

173
C-elysee_en_Chap09_info-pratiques_ed01-2016
Driving advice
Distribution of loads
F Distribute  the   load   in   the   trailer   so   that   the  h
eaviest   items   are   as   close   as   possible   to  
t

he   axle   and   the   nose   weight   approaches  
t

he   maximum   permitted   without  
e

xceeding it.
Air
  density   decreases   with   altitude,   thus  
r

educing   engine   per formance.   Above  
1 0

00 metres,   the   maximum   towed   load   must  
b

e   reduced   by   10 %   for   every   1 000   metres   of  
al

titude.
Side wind
F Take   into   account   the   increased   sensitivity  t
o   side   wind.
Cooling
Towing a trailer on a slope increases the temperature   of   the   coolant.
As
  the   fan   is   electrically   controlled,   its   cooling  
c

apacity   is   not   dependent   on   the   engine   speed.
F
 
T
o   lower   the   engine   speed,   reduce   your  
s

peed.
The
  maximum   towed   load   on   a   long   incline  
d

epends   on   the   gradient   and   the   ambient  
t

emperature.
In
  all   cases,   keep   a   check   on   the   coolant  
t

emperature. F
 
I
f   the   warning   lamp   and  
t

he STOP
 
warning   lamp   come  
o

n,   stop   the   vehicle   and   switch  
o

ff   the   engine   as   soon   as  
p

ossible.
Braking
Towing a trailer increases the braking distance.
T o   avoid   overheating   of   the   brakes   on   a   long  
m

ountain   type   of   descent,   the   use   of   engine  
b

raking   is   recommended.
Ty r e s
F Check   the   tyre   pressures   of   the   towing  v
ehicle   and   of   the   trailer,   observing   the  
re

commended
 p
ressures.
Lighting
F Check  the   electrical   lighting   and   signalling  o
n   the   trailer.
Refer
 
to
 
the
 
"Technical
 
data"
 
section
 
for
 
details
 
o

f
 
the
 
weights
 
and
 
towed
 
loads
 
which
 
apply
 
to
 
y

our
 
vehicle.
The  rear   parking   sensors   will   be  
d

eactivated   automatically   if   a   genuine  
C

ITROËN   towbar   is   used.
9
Practical information