Citroen C3 2010.5 2.G Service Manual

Page 41 of 240

2
MULTIFUNCTION SCREENS
"Trip computer" menu
Once this menu has been selected, you
can consult information concerning the
status of the vehicle (warnings log, sta-
tus of functions, etc.)
Alert log
This summarises the active warning
messages, displaying them in succes-
sion on the multifunction screen. "Personalisation-
Configuration" menu
Defi ne the vehicle parameters
Once this menu has been selected, you
can activate or deactivate the following
equipment:
- wiper linked to reverse gear (refer to the "Visibility" section),
- guide-me-home lighting
- parking sensors (refer to the "Driving" section).

 In the "
Trip computer
" menu, se-
lect one of the following applica-
tions:

 Press the "MENU" button to gain
access to the general menu.

 Press the arrows, then the "OK" but-
ton to select the "
Trip computer
"
menu.
Once this menu has been selected, you
can gain access to the following func-
tions:
- defi ne the vehicle parameters,
- display confi guration,
- choice of language.
Status of functions
This summarises the status (active or
inactive) of the vehicle's functions.
Enter distance to destination
This allows you to enter an approximate
distance until your fi nal destination.

Page 42 of 240


2
MULTIFUNCTION SCREENS
Example: setting of the duration of the
guide-me-home lighting

 Press the "  " or "  " buttons, then
the "OK" button to select the menu
required.

 Press the "  " or "  " buttons,
then the "OK" button to select the
"Guide-me-home headlamps" line.

 Press the "  " or "  " buttons to set
the value required (15, 30 or 60 sec-
onds), then press the "OK" button
to confi rm.
 Press the "  " or "  " buttons, then
the "OK" button to select the "OK"
box and confi rm or press the "ESC"
button to cancel.
Choice of language
Once this menu has been selected,
you can change the language used
by the display (Deutsch, English,
Espanol, Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Türkçe * ). "Telephone" Menu
For safety reasons, confi guration
by the driver of the multifunction
screen must only be done when
stationary.
Display confi guration
Once this menu has been selected, you
can gain access to the following settings:
- brightness-video setting,
- date and time setting,
- selection of units.
Once the fuel consumption units
have been changed to mpg, the
information in the screen rela-
ting to speed and distance also
changes to mph and miles re-
spectively. With Audio system on, once this menu
is selected you can confi gure your
Bluetooth hands-free system (pairing),
view the various telephone directories
(list of calls, services...) and manage
your calls (call, hang up, second call,
secret mode...).
For more information on the "Telephone"
function, refer to the Audio system part
of the "Audio and telematics" section.
* According to country of destination.

Page 43 of 240

2
MULTIFUNCTION SCREENS
16/9 COLOUR SCREEN (MYWAY)
Displays on the screen
It displays the following information au-
tomatically and directly:
- time,
- date,
- altitude,
- ambient temperature (the value dis-played fl ashes if there is a risk of
ice),
- check of the doors,
- warning and vehicle function status messages, displayed temporarily,
- audio functions,
- trip computer information (see the "Monitoring" section),
- satellite navigation system informa- tion. Controls
MyWay To select one of the applica-
tions, at the control panel:

 press the dedicated "RADIO" ,

"MUSIC" , "NAV" , "TRAFFIC" ,

"SETUP" or "PHONE" button for
access to the corresponding menu,

 turn the dial to change the selection,

 press the dial to confi rm the selection,
or

 press the "ESC" button to abandon
the current operation and return to
the previous display.
For more information on these applica-
tions, refer to the "Audio and Telematics"
section or to the specifi c user guide given
to you with the other owner's documents. "SETUP" menu

 Press the "SETUP" button to gain
access to the "SETUP" menu. This
allows you to select from the follo-
wing functions:
- "System language",
- "Date and time",
- "Display",
- "Vehicle",
- "Units",
- "System".

Page 44 of 240


2
MULTIFUNCTION SCREENS
* According to country.
System language
This menu allows you to select the lan-
guage used by the display: Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Polski, Portugues, Türkçe * .
Date and time
This menu allows you to set the date
and time, the format of the date and the
format of the time (refer to the "Audio
and Telematics" section or to the specifi c
user guide given to you with the other
owner's documents).
Display
This menu allows you to set the bright-
ness of the screen, the screen colour
scheme and the colour of the map (day/
night or auto mode).
Vehicle
This menu allows you to activate or
deactivate certain driving and comfort
equipment:
- wiper linked with reverse gear (refer
to the "Visibility" section),
- guide-me-home lighting and dura- tion (refer to the "Visibility" section),
- parking sensors (refer to the "Driving" section).
Units
This menu allows you to select the
units: temperature (°C or °F) and fuel
consumption (km/l, l/100 or mpg).
System
This menu allows you to restore the fac-
tory confi guration, display the software
version and activate scrolling text. For safety reasons, confi gura-
tion of the multifunction screen
by the driver must only be done
when stationary.

Page 45 of 240

3
COMFORT
VENTILATION
Air intake
The air circulating in the passenger com-
partment is fi ltered and originates either
from the outside via the grille located at
the base of the windscreen or from the
inside in air recirculation mode. Air treatment
The incoming air follows various routes
depending on the controls selected by
the driver:
- direct arrival in the passenger com-
partment (air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air conditioning).
The temperature control enables you to
obtain the level of comfort required by
mixing the air of the various circuits. The air distribution control enables you
to diffuse the air in the passenger com-
partment combining several air vents.
The air fl ow control enables you to
increase or reduce the speed of the
ventilation blower.
Control panel
The controls of this system are grouped
together on control panel
A on the cen-
tre console. Depending on the model,
the functions offered are:
- the level of comfort required,
- air fl ow,
- air distribution,
- demisting-defrosting,
- manual or digital air conditioning controls.
Air distribution

1.
Windscreen demisting-defrosting vents.

2. Front side window demisting-defrost-
ing vents.

3. Side adjustable air vents.

4. Central adjustable air vents.

5. Air outlets to the front footwells.

6. Air outlets to the rear footwells.

Page 46 of 240

3
COMFORT
RECOMMENDATIONS FOR VENTILATION AND AIR CONDITIONING
In order for these systems to be fully effective, follow the operation and
maintenance guidelines below:

 To obtain an even air distribution, take care not to obst ruct the exterior
air intake grilles located at the base of the windscreen, th e nozzles,
the vents and the air outlets, as well as the air extractor lo cated in
the boot.

 Do not cover the sunshine sensor, located on the dashboard; this is
used for regulation of the digital air conditioning system.

 Operate the air conditioning system for at least 5 to 10 mi nutes, once or
twice a month to keep it in perfect working order.

 Ensure that the passenger compartment fi lter is in good condit ion
and have the fi lter elements replaced regularly (refer to the "C hecks"
section).
We recommend the use of a combined passenger compartment fi lter.
Thanks to its special active additive, it contributes to the p urifi cation of
the air breathed by the occupants and the cleanliness of the passenger
compartment (reduction of allergic symptoms, bad odours and greasy
deposits).

 To ensure correct operation of the air conditioning system, you are also
advised to have it checked regularly as recommended in the Mainte-
nance and Warranty Guide.

 If the system does not produce cold air, switch it off and contact a
CITROËN dealer or a qualifi ed workshop.
When towing the maximum load on a steep gradient in high temperatures,
switching off the air conditioning increases the available e ngine power and
so improves the towing ability. If after an extended stop in sun-
shine, the interior temperature is
very high, fi rst ventilate the pas-
senger compartment for a few
moments.
Put the air fl ow control at a setting
high enough to quickly change
the air in the passenger compart-
ment.
The air conditioning system
does not contain chlorine and
does not present any danger to
the ozone layer.
The condensation created by
the air conditioning results in a
discharge of water under the ve-
hicle which is perfectly normal.

Page 47 of 240

3
COMFORT
HEATING/VENTILATION MANUAL AIR CONDITIONING
The heating/ventilation or air condition-
ing systems operates with the engine
running, as well as in STOP mode with
Stop & Start.
1. Temperature adjustment
2. Air fl ow adjustment
 Turn the dial from blue
(cold) to red (hot) to adjust
the temperature to your re-
quirements.

 Turn the dial from posi-
tion 1 to position 5 to ob-
tain a comfortable air fl ow.

 If you place the air fl ow con-
trol in position 0 (deactivation
of the system), the tempera-
ture is no longer maintained
at a comfortable level. How-
ever, a slight fl ow of air, due to
the movement of the vehicle,
can still be felt.
Manual control panel
Electric control panel
Manual control panel
Electric control panel

Page 48 of 240

3
COMFORT
HEATING/VENTILATION MANUAL AIR CONDITIONING
The heating/ventilation or air condition-
ing systems operates with the engine
running, as well as in STOP mode with
Stop & Start.
1. Temperature adjustment
2. Air fl ow adjustment
 Turn the dial from blue
(cold) to red (hot) to adjust
the temperature to your re-
quirements.

 Turn the dial from posi-
tion 1 to position 5 to ob-
tain a comfortable air fl ow.

 If you place the air fl ow con-
trol in position 0 (deactivation
of the system), the tempera-
ture is no longer maintained
at a comfortable level. How-
ever, a slight fl ow of air, due to
the movement of the vehicle,
can still be felt.
Manual control panel
Electric control panel
Manual control panel
Electric control panel

Page 49 of 240

3
COMFORT
3. Air distribution adjustment
4. Air intake/Air recirculation
The intake of exterior air avoids the for-
mation of mist on the windscreen and
side windows.
The recirculation of interior air insulates
the passenger compartment from exte-
rior odours and smoke.
Return to exterior air intake as soon as
possible to prevent deterioration of the
air quality and the formation of mist. Windscreen and side windows.
Windscreen, side windows
and footwells.
Footwells.
Central and side vents.
The air distribution can be
adapted by placing the dial in
an intermediate position.

 Move the manual con-
trol to the left to be in
the "recycling interior
air" position.

 Move the manual con-
trol to the right to re-
turn to the "fresh air
intake" position.

Manual control panel

Electric control panel

 Press the button to recir-
culate the interior air. The
indicator lamp comes on
to confi rm this.

 Press the button again to allow fresh
air into the passenger compartment.
The indicator lamp goes off to con-
fi rm this. 5. Air conditioning On/Off
Switching off

 Press the "A/C" button again, the
button's indicator lamp goes off.
Switching off may affect comfort levels
(humidity, condensation). The air conditioning is de-
signed to operate effectively in
all seasons, with the windows
closed.
It enables you to:
- lower the temperature, in summer,
- increase the effectiveness of the demisting in winter, above 3 °C.
Switching on

 Press the "A/C" button, the button's
indicator lamp comes on.
The air conditioning does not
operate when the air fl ow adjust-
ment control 2 is in position " 0 ".

Page 50 of 240

3
COMFORT
With the heating/ventilation
system

 Put the temperature and air fl ow
controls to the dedicated marked
position.

 Put the air intake control to the
"Exterior air intake" position
(manual control to the right or electric control with indicator lamp off).

 Put the air distribution control to the
"Windscreen" position.
FRONT DEMIST - DEFROST
These markings on the control
panel indicate the control po-
sitions for rapid demisting or
defrosting of the windscreen
and side windows. With the manual air
conditioning system

 Put the temperature and air fl ow
controls to the dedicated marked
position.

 Put the air intake control to the
"Exterior air intake" position
(manual control to the right or elec- tric control with indicator lamp off).

 Put the air distribution control to the
"Windscreen" position.

 Switch on the air conditioning by
pressing the "A/C" button; the associ-
ated green warning lamp comes on.
With Stop & Start, when the
demisting, air conditioning and
air fl ow functions are activated,
STOP mode is not available.

Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 ... 240 next >