headlamp Citroen C3 PICASSO DAG 2008.5 1.G User Guide

Page 132 of 207

i
!
i
!
i
119
PRACTICAL INFORMATION
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb
Front lights

1.

Direction indicators (H21 W amber).

2. Dipped headlamps (H7-55 W).

3. Main beam headlamps (H1-55 W).

4. Side lights (W 5 W).

5. Fog lamps (PSX24 W).
In certain climatic conditions (low
temperature, humidity), the pres-
ence of condensation on the in-
side of the headlamp and light
glass is normal ; it disappears
a few minutes after the lights are
switched on.
 Handle the bulbs using a dry
cloth.
The headlamps are fi tted with poly-
carbonate lenses, coated with a
protective varnish:

 do not clean them with a dry
or abrasive cloth or using a
detergent or solvent product,

 use a sponge and soapy water,

 when using a high pressure
washer on stubborn dirt, do not
spend too long on the head-
lamps, lights and their sur-
rounds to avoid damaging their
varnish and their seals.
Changing direction indicator bulbs Amber coloured bulbs, such as
the direction indicators, must be
replaced with bulbs of identical
specifi cations and colour.

 Remove the plastic protective cover.

 Pull the bulb-holder and replace the
bulb.
To refi t, carry out these operations in re-
verse order.
When refi tting, close the plastic
cover carefully to guarantee the
sealing of the headlamp. If either of the direction indicator
warning lights is fl ashing quickly,
one of the bulbs is faulty.

Page 133 of 207

i
120
PRACTICAL INFORMATION Changing integrated direction
indicator side repeaters
Contact a CITROËN dealer to obtain re-
placement repeaters.

 Insert a screwdriver on the edge of
the repeater.

 Tilt the screwdriver to extract the re-
peater and remove it.

 Disconnect the repeater connector.
When removing:
- be careful not to damage the paint- work of your vehicle with the screw-
driver,
- do not allow the wire and the connector to slide inside the wing.
To refi t, carry out these operations in
reverse order.

Changing main beam headlamp
bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Disconnect the bulb connector.

 Move the springs to release the
bulb.

 Remove the bulb and change it.
To refi t, carry out these operations in re-
verse order.
Changing side light bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Pull the bulb-holder.

 Remove the bulb and replace it.
To refi t, carry out these operations in re-
verse order.
Changing dipped headlamp bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Turn the bulb-holder by a quarter
turn.

 Remove the bulb and change it.
To refi t, carry out these operations in
reverse order.
If you experience any diffi culty
in replacing bulbs, contact your
CITROËN dealer.

Page:   < prev 1-10 11-20