display Citroen C4 2015 2.G Workshop Manual

189
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Gear shift indicator*
Depending on the driving situation and your vehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   (or   more)   gear(s).   You   can  
f

ollow   this   instruction   without   engaging   the  
i

ntermediate
 g
ears.
The
  gear   engagement   recommendations   must  
n

ot   be   considered   compulsory.   In   fact,   the  
c

onfiguration   of   the   road,   the   amount   of   traffic  
a

nd   safety   remain   determining   factors   when  
c

hoosing   the   best   gear.   Therefore,   the   driver  
r

emains   responsible   for   deciding   whether   or   not  
t

o   follow   the   advice   given   by   the   system.
This
  function   cannot   be   deactivated. -
 
Y
ou   press   the   accelerator   pedal.
Example:
-
 Y ou   are   in   third   gear.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
The
  information   appears   in   the   instrument  p
anel   in   the   form   of   an   arrow.
System
  which   reduces   fuel   consumption   by   recommending   the   most   appropriate   gear.
With   an   electronic   or   automatic   gearbox,   the  
s

ystem   is   only   active   in   manual   mode.
*
  Depending   on   engine. On
  vehicle   fitted   with   a   manual   gearbox,  
t

he   arrow   may   be   accompanied   by   the   gear  
re

commended.The
  system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (slope,   load, ...)   and  
t

he   demands   of   the   driver   (power,  
a

cceleration,   braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear,
Operation
On BlueHDi Diesel versions with manual gearbox,  t he  s ystem  m ay  s uggest  c hanging  i nto  
n

eutral   so   that   the   engine   can   go   into   standby  
(

STOP   mode   with   Stop   &   Start),   in   certain  
d

riving   conditions.   In   this   case,   N is displayed
in
  the   instrument   panel.
9
driving

191
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
The flashing and then fixed illumination   of   the   under-inflation w

arning   lamp   accompanied   by   the
 i

llumination   of   the   service   warning
 l

amp   indicates   a   fault   with   the   system.
Operating fault
The aler t  is  given  by  the  fixed  illumination o
f   this   warning   lamp,   accompanied   by a

n   audible   signal,   and   depending   on
 e

quipment,   the   display   of   a   message.
Under-inflation alert
In the event of a problem on one of the tyres, the   symbol   or   the   message   appears,   according  
t

o   equipment,   to   identify   it.
F
 
R
educe   speed,   avoid   sudden   steering  
m

ovements   or   harsh   brake   applications.
F
 
S
top   as   soon   as   it   is   safe   to   do   so. In
  this   case,   monitoring   of   the   tyre   pressures   is  
n

ot   assured.
F  
I
f   you   have   a   compressor   (the   one   in   the  
t

emporary   puncture   repair   kit   for   example),  
c

heck   the   four   tyre   pressures   when   cold.
 I

f   it   is   not   possible   to   check   the   tyre  
p

ressures   at   the   time,   drive   carefully   at  
r

educed
 s
peed.


or
F
I
n the event of a puncture, use the
temporary   puncture   repair   kit   or   the   spare  
w

heel   (according   to   equipment).
Go   to   a   CITROËN   dealer   or   a   qualified  w
orkshop to   have   the   system   checked   or,  
f

ollowing   the   repair   of   a   puncture,   to   have   the  
o

riginal   wheel,   equipped   with   a   sensor,   refitted.
Any
  tyre   repair   or   replacement   on   a   wheel  
f

itted   with   this   system   must   be   carried   out   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
If
  after   changing   a   tyre,   a   wheel   is   not   detected  
b

y   your   vehicle   (fitting   snow   tyres   for   example),  
y

ou   must   have   the   system   reinitialised   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
The loss of pressure detected does not
always
  lead   to   visible   deformation   of   the  
t

yre.   Do   not   rely   on   just   a   visual   check.This alert is also displayed when one or
more
  wheels   is   not   fitted   with   a   sensor  
(

for   example,   a   space-saver   or   steel  
spar

e
 w
heel).
The   alert   is   maintained   until   the   tyre   or  t
yres concerned is reinflated, repaired
or
  replaced.
The
  spare   wheel   (space-saver   type   or   a  
s

teel   rim)   does   not   have   a   sensor.
9
Driving

193
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Deactivation
Going into engine START mode
At any time, press the "ECO OFF" switch to
d eactivate   the   system.
This
  is   confirmed   by   the   switch   warning   lamp  
c

oming   on   accompanied   by   the   display   of   a  
m

essage.
Special cases: START invoked
automatically
The "ECO"  warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-

w

ith a manual gearbox , when you fully
depress the clutch pedal,
-

w

ith an electronic gearbox :
●
 
g

ear   lever   in   position   A or M, when you
release
  the   brake   pedal,
●
 
o

r
 
gear   lever   in   position   N   and   the   brake  
p

edal   released,   when   you   move   the   gear  
l

ever to position A or M ,
●
 
o

r
 
when   you   engage   reverse   gear.For
  safety   reasons   or   to   ensure   smooth  o
peration,   START   mode   is   invoked  
a

utomatically
 w
hen:
-
 
y
ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   15 mph  
(

25   km/h)   with   a   manual   gearbox   (3 km/h  
(

2   mph)   with   PureTech   130   petrol   and  
B

lueHDi   Diesel   versions)   or   7   mph  
(

11 km/h)   with   an   electronic   gearbox,
-
 
t
he   electric   parking   brake   is   being   applied,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case the "ECO"
 

warning   lamp  
f

lashes for few seconds, then
goes
  off.
This operation is perfectly normal.
With
  a   manual   gearbox   in   STOP   mode,  
i

f
 
a
  gear   is   engaged   without   fully  
d

epressing   the   clutch   pedal,   a   warning  
l

amp   comes   on   or   an   alert   message  
i

s
 
displayed   asking   you   to   depress   the  
c

lutch   pedal   to   restart   the   engine. If
  the   system   has   been   deactivated  
i

n   STOP   mode,   the   engine   restarts  
i

mmediately.
9
Driving

194
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Maintenance
In the event of a malfunction with the system, the "ECO OFF"   switch   warning   lamp   flashes,  
t

hen   comes   on   continuously.
Ha

ve   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault
This system requires a specific battery with a special   specification   and   technology   (reference  
n

umbers   available   from   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop).
Fitting
  a   battery   not   listed   by  
C

ITROËN introduces   the   risk   of   malfunction   of  
t

he   system.Before
  doing   anything   under   the  
b

onnet, deactivate the Stop & Start
system   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
The   Stop   &   Start   system   makes   use  
o

f   advanced   technology.   All   work   on  
t

his   type   of   battery   must   be   done   only  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In
 
the
 
event
 
of
 
a
 
fault
 
in
 
STOP
 
mode,
 
the
 v

ehicle
 
may
 
stall.
 
All
 
of
 
the
 
instrument
 p

anel
 
warning
 
lamps
 
come
 
on.
Depending
 
on
 
version,
 
an
 
alert
 
m

essage
 
may
 
also
 
be
 
displayed
 
asking
 
y

ou
 
to
 
put
 
the
 
gear
 
lever
 
into
 
position
 
N
and
 
put
 
your
 
foot
 
on
 
the
 
brake
 
pedal.
It is then necessary to switch off the
ignition,
 
then
 
restart
 
the
 
engine
 
using
 
t

he
 
key
 
or
 
the
 
"START/STOP"
 
button.
Reactivation
The system is reactivated automatically a t   every   new   start   using   the   key   or   the  
"

START/STOP"   button.
Press the "ECO OFF"
  switch   again.
The
 
system   is   active   again;   this   is   confirmed  
b

y
 
the
  switch   warning   lamp   going   off   and   the  
d

isplay   of   a   message.
Driving

199
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Memorising speeds
F Press the "MEM" button to display the list
of   speed   settings   memorised.
Access
For safety reasons, the driver must only carry out these operations when
stationary.
This
 
function
 
allows
 
speed
 
settings
 
to
 
be
 
registered
 
which
 
will
 
then
 
be
 
offered
 
as
 
settings
 
for
 
two
 
systems:
 
the
 
speed   limiter   (a   maximum   speed)   and  
t

he
 
cruise
 
control
 
(cruising
 
speed).
You
 
can
 
memorise
 
up
 
to
 
six
 
speed
 
settings
 
in
 
the
 
system.
 
By
 
default,
 
some
 
speed
 
settings
 
are
 
already
 
memorised.
F
 
G

o   to   the   main   menu   by   pressing   the  
"

MENU"
 b
utton:
F
 
Sel
ect
 t
he
 "
Personalisation-configuration"
 m

enu   and   confirm.
F
 
S

elect   " Vehicle   parameters"   menu   and  
c

onfirm.
F
 
S

elect   the   "Driving   assistance"   line   and  
c

onform.
F
 
S

elect   "Speeds   memorised"   line   and  
c

onfirm.
F
 
M

odify   the   speed.
F

Sel
ect "
OK"   and   confirm   to   save   the  
m

odifications.
To
 
select
 
a
 
memorised
 
speed
 
setting:
F

p

ress and hold the "
+" or " -"
 
button;
 
the
 
s

ystem
 
stops
 
at
 
the
 
nearest
 
memorised
 
s

peed
 
setting,
F
 
p

ress
 
and
 
hold
 
again
 
the
 
"
+ " or " -" button to
select
 
another
 
memorised
 
speed
 
setting.
A
 
reminder
 
of
 
the
 
speed
 
and
 
the
 
state
 
of
 
the
 
s

ystem
 
(on
 
/
 
off)
 
is
 
displayed
 
in
 
the
 
instrument
 
pan

el.
With your Audio system
Selection
9
driving

201
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
The programmed information is grouped together in   the   instrument   panel   screen.
6.
  S

peed   limiter   on   /   off   indication.
7.
  S

peed   limiter   mode   selection   indication.
8.
  P

rogrammed   speed   value.
9.
  S

election   of   a   memorised   speed.
Displays in the instrument panel
Speed limiter
The functions of this system are grouped together   on   the   steering   mounted   controls.
1.
 S

peed   limiter   mode   selection   wheel.
2.
 P

rogrammed   value   decrease   button.
3.
 P

rogrammed   value   increase   button.
4.
 S

peed   limiter   on   /   off   button.
5.
 L

ist   of   memorised   speeds   display   button.
Steering mounted controls
Operation
System which prevents the vehicle from exceeding the speed programmed by the driver.
W hen   the   programmed   speed   limit   is   reached,   pressing   the   accelerator   pedal   no   longer   has   any  
ef

fect.
The
  speed   limiter   is   switched on
 m
anually:
 i

t   requires   a   programmed   speed   of   at   least  
2

0 mph   (30   km/h).
The
  speed   limiter   is   switched off
 
by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
The
 
p
rogrammed  
s
peed  
r
emains  
i
n  
t
he  
m
emory  
w

hen   the   ignition   is   switched   off.
The speed limiter cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
9
Driving

202
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Programming
Exceeding the programmed speedExiting the speed limiter mode
In the event of a fault with the speed limiter, t he   speed   is   cleared   resulting   in   flashing   of   the  
das

hes.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
F
 
S

witch
 
the
 
speed
 
limiter
 
off
 
by
 
pressing
 
button
 
4 :
 
the
 
display
 
c

onfirms
 
that
 
it
 
has
 
been
 
switched
 
off
 
(Pause).
F
 
S

et
 
the
 
speed
 
value
 
by
 
pressing
 
button
 
2 or 3
 
(e.g.:
 
55 mph
 
(

90 km/h)).
You
 
can
 
then
 
change
 
the
 
programmed
 
speed
 
using
 
buttons 2 and 3
:
-
 b
y
 
+
 
or
 
-
 
1
 
mph
 
(km/h)
 
=
 
short
 
press,
-
 
i

n
 
steps
 
of
 
+
 
or
 
-
 
5
 
mph
 
(km/h)
 
=
 
maintained
 
press.
If
 
speed
 
memorisation
 
is
 
available
 
and
 
activated
 
on
 
your
 
vehicle,
 
the
 
p

rogrammed
 
speed
 
will
 
stop
 
at
 
the
 
closest
 
memorised
 
speed;
 
refer
 
to
 
t

he
 
corresponding
 
section. F

T

urn dial 1 to the "LIMIT"
 

position:
 
the
 
s

peed
 
limiter
 
mode
 
is
 
selected
 
but
 
is
 
n

ot
 
switched
 
on
 
(Pause).
You
 
do
 
not
 
have
 
to
 
switch
 
the
 
speed
 
limiter
 
o

n
 
in
 
order
 
to
 
set
 
the
 
speed.
F
 
S

witch
 
the
 
speed
 
limiter
 
on
 
by
 
pressing
 
button
 
4 .
Pressing the accelerator pedal to exceed the programmed speed will not have a
ny effect unless you press the pedal firmly past the point of resistance.
The
  speed   limiter   is   deactivated   temporarily   and   the   programmed   speed,
 w

hich   is   still   displayed,   flashes.
Returning
  to   the   programmed   speed,   by   means   of   intentional   or   unintentional
 d

eceleration   of   the   vehicle,   automatically   cancels   the   flashing   of   the
 pro

grammed
 s
peed.
F Turn dial 1 to the "0"  position:   the   speed  l
imiter   mode   is   deselected.   It   disappears  
f

rom   the   screen.
Operating fault
F Switch  the   speed   limiter   back   on   by   pressing   button   4  ag ain.on a s
teep descent or in the event of
sharp
  acceleration,   the   speed   limiter  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed   speed.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   positioned  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Driving

203
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Cruise control
The functions of this system are grouped together   on   the   steering   mounted   controls.
1.
 C

ruise   control   mode   selection   dial.
2.
 S

peed   programming   /   value   decrease  
b

utton.
3.
 S

peed   programming   /   value   increase  
b

utton.
4.
 C

ruise   control   off   /   resume   button.
5.
 M

emorised   speeds   display   button.
Steering mounted controls
The programmed information is grouped together   in   the   instrument   panel   screen.
6.
  C

ruise   control   off   /   resume   indication.
7.
  C

ruise   control   mode   selection   indication.
8.
  P

rogrammed   speed   value.
9.
  S

electing   a   stored   speed.
Displays in the instrument panel
The cruise control is switched on m anually: it r
equires   a   minimum   vehicle   speed   of   25   mph  
(

40   km/h)   and   engagement   of:
-
 
f
ourth   gear   on   the   manual   gearbox,
-
 
s
econd   gear   on   the   electronic   gearbox  
s

ystem   or   automatic   gearbox,   in   sequential  
d

riving   mode,
-
position A
  on   the   electronic   gearbox  
s

ystem   or   D   on   an   automatic   gearbox.
The cruise control is switched off
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal   or   on  
t

riggering   of   the   trajectory   control   systems,   for  
s

afety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   value.
The cruise control system cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
You
  are   advised   to   keep   your   feet   near   the   pedals   at
 a

ll   times.
System which automatically maintains the speed of the vehicle at the value programmed by the driver,   without   any   action   on   the   accelerator   pedal.
Operation
9
driving

205
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Parking sensors
The system is switched on by engaging reverse gear.   This   is   accompanied   by   an   audible   signal.
The
  system   is   switched   off   when   you   come   out  
o

f   reverse   gear.
Rear parking sensors
Audible assistance
The proximity information is given by an intermittent   audible   signal,   the   frequency   of   which i

ncreases   as   the   vehicle   approaches   the   obstacle.
The
  sound   emitted   by   the   speaker   (right   or   left)
 i

ndicates   the   side   on   which   the   obstacle   is   located.
When the distance between the vehicle and
the
  obstacle   becomes   less   than   approximately
 t

hirty   centimetres,   the   audible   signal   becomes
 c

ontinuous.
Visual assistance
This supplements the audible signal by d isplaying   bars   in   the   multifunction   screen  
w

hich   move   progressively   nearer   to   the   vehicle.  
W

hen   the   obstacle   is   near,   the   "Danger"  
s

ymbol   is   displayed   in   the   screen.
This function cannot, in an y c ircumstances, t
ake   the   place   of   the   vigilance   of   the   driver.
This system indicates the proximity of an obstacle   (person,   vehicle,   tree,   gate, etc.)   which c

omes   within   the   field   of   detection   of   sensors
 l

ocated   in   the   bumper.
Certain
  types   of   obstacle   (stake,   roadworks  
c

one,   etc.)   detected   initially   will   no   longer   be  
d

etected   at   the   end   of   the   manoeuvre   due   to  
t

he   presence   of   blind   spots.
9
Driving

208
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Fuel tank
Capacity of the tank: approximately 60 litres.When the low fuel level in the
tank
  is   reached,   this   warning   lamp  
c

omes   on   in   the   instrument   panel,  
a

ccompanied   by   an   audible   warning  
a

nd   the   display   of   an   alert   message.  
W

hen   it   first   comes   on,   around
6
litres   of   fuel   remain   in   the   tank.
Low fuel level
Additions of fuel must be of at least 5 litres to be   registered   by   the   fuel   gauge.
Opening
  the   filler   cap   may   result   in   an   inrush   of  
a

ir.   This   vacuum   is   entirely   normal   and   results  
f

rom   the   sealing   of   the   fuel   system.
F

P
ress control A   until   the   automatic   opening  
o

f   the   fuel   flap   is   heard.
 T

his   control   remains   active   for   a   few  
m

inutes   after   switching   off   the   ignition.   If  
n

ecessary,   switch   the   ignition   on   again   to  
r

eactivate   it.
F
 
T
ake   care   to   select   the   pump   that   delivers  
t

he   correct   fuel   for   your   vehicle.If you are filling your tank to the top, do not
persist after the third cut- off; this could
cause your vehicle to malfunction. F

I
ntroduce the nozzle so as to push in the
metal
  non-return   flap   B.
F
 
M
ake   sure   that   the   nozzle   is   pushed   in   as  
f

ar   as   possible   before   starting   to   refuel  
(

risk   of   blowback).
F
 
M
aintain   this   position   while   refuelling.
F
 
P
ush   the   fuel   flap   to   close   it.
With Stop & Start, never refuel with the
system
 
in
 
STOP
 
mode;
 
you
 
must
 
switch
 
o

ff
 
the
 
ignition
 
with
 
the
 
key,
 
or
 
the
 
S

TART/STOP
 
button
 
if
 
your
 
vehicle
 
has
 
K

eyless
 
Entry
 
and
 
Starting.
Until
 
sufficient
 
fuel
 
has
 
been
 
added,
 
every
 
t

ime
 
the
 
ignition
 
is
 
switched
 
on,
 
this
 
warning
 
l

amp
 
appears,
 
accompanied
 
by
 
an
 
audible
 
s

ignal
 
and
 
an
 
alert
 
message.
 
When
 
driving,
 
t

his
 
audible
 
signal
 
and
 
the
 
display
 
of
 
this
 
a

lert
 
message
 
are
 
repeated
 
with
 
increasing
 
f

requency,
 
as
 
the
 
level
 
drops
 
towards
 
0 .
You
 
must
 
refuel
 
as
 
soon
 
as
 
possible
 
to
 
avoid
 
r

unning
 
out.
If
 
you
 
run
 
out
 
of
 
fuel
 
(Diesel),
 
refer
 
to
 
the
 
c

orresponding
 s

ection.
Refuelling
Checks