display Citroen C4 AIRCROSS 2014 1.G User Guide
Page 49 of 368
1
47
Monitoring
Average fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated
since the trip computer was
last reset.
Average speed
(km/h or mph)
This is the average speed
calculated since the trip
computer was last reset.
Current fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated over
the last few seconds.
This value may change following a
change in the style of driving or the relief.
If dashes "- - -" are displayed for long
periods in place of the digits while
driving, contact a CITROËN dealer or a
qualified workshop.
Resetting the information to zero
When the required information is displayed,
press the INFO
button for more than
two seconds to reset all of the information to
zero.
When the ignition is switched on, the zero reset
switches automatically from manual mode to
automatic mode.
Automatic
If the ignition key remains in the OFF position
for more than 4 hours, the information is reset
to zero automatically.
Page 50 of 368
48
Monitoring
The various menus may change between
the type 1 instrument panel and the type 2
instrument panel.
Adjusting vehicle settings
When the vehicle is
stationary
, it allows the
user to change the following
settings:
- the reinitialisation
mode for average
fuel consumption and
average speed,
)
Press and hold the INFO
button for a few
seconds to display the menu screen.
)
In the menu screen, press the INFO
button
to select a function from the list:
- the fuel consumption units,
- the temperature display unit,
- the display language,
- activation/deactivation of the sound when
pressing the INFO
button,
- the break (rest) reminder display inter val,
- restore the factory settings.
To change the settings, you must stop
the vehicle and switch on the ignition.
Apply the parking brake and place the
gear lever in neutral.
With the ignition on
, press the INFO
button
on the dashboard, to the left of the instrument
panel, several times in succession until the
"SETTINGS MENU" screen is displayed.
Operation
MENU
1/3
:
- 1 - 2, A - M, A - P
* (choice of the type of
reset of average fuel consumption and
average speed),
- AVG UN I T
(choice of the fuel consumption
units),
- choice of the temperature display unit
,
- LANGUAGE
(option of the display
language),
*
According to display language.
For your safety, when the vehicle is
moving
, the function settings are not
displayed when you press the INFO
button.
Page 51 of 368
1
49
Monitoring
MENU
2/3:
- a/b
(option of displaying a different
language in the instrument panel screen
and the navigation screen),
- activation / deactivation of the INFO
button sound
,
- ALERT
(changing of the "REST
REMINDER" display inter val),
- selection of the sound
of the direction
indicators,
- activation / deactivation of the current
fuel consumption
,
Press and hold the INFO
button for a
few seconds to return to the previous
screen.
When the menu screen is displayed,
if no operation is carried out within
15 seconds, the Settings Menu screen
is displayed.
MENU 3/3:
- RESET
(restore factory settings).
Choice of the reset mode for
average fuel consumption and
average speed
You can choose between two average fuel
consumption and average speed reset modes:
- automatic reset,
- manual reset.
In the menu screen:
)
press the INFO
button to select:
)
press and hold the INFO
button for a
few seconds to switch in succession from
reset mode 1
- A (automatic) *
to reset
mode 2 - M - P (manual) *
.
The mode selected is confirmed.
*
According to display language.
Page 52 of 368
50
Monitoring
If the battery is disconnected, the
settings memory is cleared and
the default unit (km/L) is restored
automatically.
If the battery is disconnected, the
settings memory is cleared and
the default unit (°C) is restored
automatically.
)
press the INFO
button to scroll the units
(km/L, L/100km, mpg (US), mpg (UK) and
RETURN) in succession,
)
press and hold the INFO
button for a few
seconds to confirm your selection.
Choice of the temperature
display unit
)
press and hold the INFO
button for a few
seconds to scroll the units (°C and °F) in
succession.
The mode selected is confirmed. In the menu screen:
)
press the INFO
button to select the
temperature unit setting symbol
(thermometer):
Choice of the fuel consumption
unit
The distance, speed and quantity of fuel units
will also be changed in accordance with your
choice of fuel consumption unit.
In the menus screen:
)
press the INFO
button to select "UNIT"
.
)
press and hold the INFO
button for a
few seconds to display the "AVG U N I T "
screen.
Page 53 of 368
1
51
Monitoring
If you select the "- - -" setting, no
message will be displayed in message
display situations.
If the battery is disconnected, the
settings memory is cleared and the
default language (ENGLISH) is restored
automatically.
)
press the INFO
button to scroll the
languages (Japonais, English, Deutsch,
Français, Espanol, Italiano, Russe "- - -" and
RETURN) in succession,
)
press and hold the INFO
button for a few
seconds to confirm your selection.
Choice of the display LANGUAGE
In the menu screen:
)
press the INFO
button to select
"LANGUAGE"
:
)
press and hold the INFO
button for a few
seconds to display the "LANGUAGE"
screen:
Page 54 of 368
52
Monitoring
If the battery is disconnected, the
settings memory is cleared and
the default choice (ON) is restored
automatically.
As a safety measure, it is
recommended that you stop for a break
every two hours. You can activate or deactivate the sound
associated with the INFO
button.
Activation / deactivation of the
"INFO" button sound
In the menu screen:
)
press the INFO
button to select
the INFO
button sound activation /
deactivation symbol (located in
menu 2/3)
:
)
press and hold the INFO
button for a few
seconds to scroll the choices (ON, OFF) in
succession.
The mode selected is confirmed.
Changing the display interval of
the "REST REMINDER" message
The "REST REMINDER" function allows you to programme
an alert message reminding you to take a break.
The "REST REMINDER" message appears accompanied
by an audible signal.
You can change the display inter val of the "REST
REMINDER"
message.
In the menu screen:
)
press the INFO
button to select "A L A R M "
(located in menu 2/3)
:
)
press and hold the INFO
button for a few
seconds to display the "A L A R M "
screen,
)
press the INFO
button to select the display
inter val of the "REST REMINDER"
message,
)
press and hold the INFO
button for a
few seconds to confirm.
If the battery is disconnected, the
settings memory is cleared and
the default value (OFF) is restored
automatically.
Page 55 of 368
1
53 Monitoring
On the menu screen:
)
press the INFO
button to select "RESET"
(located in menu 2/2 or 3/3 depending
on the instrument panel)
:
Restoring factory settings
(RESET)
You can restore all of the factory settings for all
functions.
)
press and hold the INFO
button for at least
5 seconds
.
There is an audible signal and all of the factory
settings are restored for all functions.
In the menu screen:
)
press the INFO
button to select the current
fuel consumption activation / deactivation
symbol (located in menu 2/3)
:
Activation / deactivation of the
current fuel consumption *
You can activate or deactivate the display
of the current fuel consumption, with the
type 2 instrument panel only.
)
press and hold the INFO
button for a few
seconds to scroll through the choices in
succession (ON, OFF).
*
Depending on equipment.
In the menu screen:
)
press the INFO
button to select sound 1 or 2
(located in menu 2/3)
:
Selection of the sound
for the direction indicators
You can select the sound for the direction
indicators, with the type 2 instrument panel only.
Page 56 of 368
54
Monitoring
Audio-CD system screen
Associated with the Audio- CD system, this
screen can display the following information:
- the time,
- audio system information.
(see the "Audio and telematics" section).
Setting the time
Selecting the adjustment mode
The digital clock can be set in automatic
mode
or in manual mode
.
Manual mode
This mode permits manual setting of the time
using the audio system buttons.
It can also be used when the "Automatic mode"
displays an inaccurate time, when the local
RDS stations are broadcasting from a different
time zone.
Automatic mode
This mode permits automatic setting of the
local time using the signal from RDS stations.
The symbol "CT"
appears in the screen.
Page 57 of 368
1
55
Monitoring
If no action is carried out within
10 seconds, the selection menu closes
automatically. To select the mode:
)
Press the " PWR/VOL
" button to switch on
the audio system.
)
Press the MENU
button.
)
Press the SEL
knob to scroll through
the menus and select " RDS setting -
CT ON - CT OFF
" (clock time).
)
Turn the SEL
knob to the left or to the right
to select "CT OFF"
(manual mode)
or "CT ON"
(automatic mode).
)
Press the SEL
knob to confirm.
The digital clock does not display
seconds.
The time setting is lost if the battery is
disconnected.
Manual adjustment
)
Press the PWR/VOL
button to switch on
the audio system.
)
Press the MENU
button.
)
Press the SEL
knob to run scroll through
the menus and select " Time Setting
Adjust
".
)
Turn the SEL
knob to select " ON
" for
access to time setting.
)
Press the SEL
knob to confirm.
)
Turn the SEL
knob to adjust the time.
)
Press the SEL
knob to confirm.
Page 58 of 368
56
Monitoring
Touch screen Audio-CD system screen
Associated with the touch screen Audio- CD
system, this screen can display:
- the time,
- information related to the audio system.
(See the "Audio and telematics" section).
For reasons of safety, the driver
should only carry out operations that
require close attention with the vehicle
stationary.
Do not use pointed objects on the touch
screen.
Do not touch the screen with wet hands.
Use a clean soft cloth to clean the
screen.
Use the buttons arranged on the screen to
operate the system.
)
Press the MENU
button to display the main
menu.
)
Press " Setting
".
)
Press " System Setting
".
)
Press " Time Setting
".
Setting the time
General operation
1.
CD eject.
2.
System On / Off.
Volume adjustment.
3.
Access to the different menus in the system.