Citroen C4 DAG 2014.5 2.G Owner's Manual

05
309
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
Pairing a telephone
First connection
The services offered depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.
Consult   your   telephone's   manual   and   your   operator   to   find   out   which   services   are   available   to   you.
Activate
  the   telephone's   Bluetooth   function   and  
ensure that

it is "visible to all" (refer to the telephone
user
  guide). Press MENU. A
 

window   is   displayed   "Search in progress…"
Select
  the   telephone   to   be   connected  
from

  the   list.   Only   one   telephone   can  
be

  connected   at   a   time.
Select "Search for a device".
For
  safety   reasons   and   because   they   require   prolonged   attention   on   the   part   of   the   driver,   the   operations   for   pairing   of   the   Bluetooth   mobile  
telephone

  with   the   Bluetooth   hands-free   system   of   your   audio   system   must   be   carried   out   with   the  
vehicle stationary
  and   the   ignition   on.
Visit
  www.citroen.co.uk   for   more   information   (compatibility,   additional   help,   ...).
Select "Bluetooth connection "
  and  
confirm.

05
Saisir code authentification
01
OK Del 23456789
_

310
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
A  virtual   keypad   is   displayed   on   the  screen:
  enter   a   code   with   at   least  
4 digits

  and   conform   with  
OK
.
A
 

message
 
is   displayed   on   the   screen   of   the  
telephone:

 
enter   the   same   code   and   confirm. A
 

message   appears   in   the   screen   to   confirm   the   result   of   the  
connection.
Pairing

  can   also   be   initiated   from   the   telephone   by   searching   for  
detected

  Bluetooth   devices.
Accept
  the   connection   to   the   telephone.
If
 
pairing
 
fails,   try   again;   the   number   of   attempts   is   not   limited.The
  directory   and   the   calls   list   can   be   accessed   after   the  
synchronisation

  period   (if   the   telephone   is   compatible).
Automatic
  connection   must   be   configured   in   the   telephone   to   allow  
the

  connection   each   time   the   vehicle   is   started.
In
 
some
 
cases,   the   reference   number   of   the   telephone   or   the  
Bluetooth

 
address   may   appear   instead   of   the   name   of   the   telephone.
Pair/connect   the   telephone   then   listen:   see   the  
AUDIO
  section.
Streaming - Playing audio files via
Bluetooth

05

3 11
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
The telephone connection automatically includes hands free operation and  audio   streaming.
The
  ability   of   the   system   to   connect   to   just   one   profile   depends   on   the  
telephone.

  Both   profiles   may   connect   by   default.
Press MENU.
Select "Bluetooth connection "
  and  
confirm. Indicates

  connection   of   the   audio   steaming   profile.
Managing connections
Select "Connections management"
and  confirm.  The   list   of   paired  
telephones

  is   displayed. Select
  a   telephone   and   confirm.
Indicates   connection   of   the   hands-free   profile.
Then   select   and   confirm:
-  
"
Connect telephone
"   /   "
Disconnect
telephone":   to   connect   /   disconnect  
the

  telephone   or   the   hands-free  
connection

  only.
-  
"
Connect media player"   /  
"

Disconnect media player":   to  
connect

  /   disconnect   only   streaming.
-  " Connect telephone + media
player"   /   "Disconnect telephone +
media player":   to   connect   /  
disconnect

  the   telephone   (hands-free  
and

  streaming).
-
 
"
Delete connection":   to   delete   the  
pairing.
Indicates

  that   a   device   is   connected.

05


312
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
To display the " TELEPHONE "   menu:
-  
Make along press on SOURCE or SRC.
- Or,   press   OK   to   display   the  contextual
  menu.   Select   "Call"
  and  
confirm.
-

 
Or
,   press   MENU, select
"Telephone"
  and   confirm.  
Select

"Call"   and   confirm.
Select "Dial"
  to   enter   a   number   and  
confirm. T

o   display   the   "
TELEPHONE"   menu:
-  Make   a   long   press   on  SRC/TEL .
-  Or ,   press   the   dial   to   display   the  contextual
  menu.   Select   "Call"
  and  
confirm.
-
 Or

,   press   MENU, select "Telephone"
and
  confirm.   Select   "Call"   and
 confirm.
Select

OK   and   confirm   to   start   the  
call. Select "

Calls list"   and   confirm.
Making a call - Dialling
Select numbers one at a time using the 7   and   8   buttons   and   confirm.
Making a call - Recently called numbers*
Select the number and confirm to start  the   call.
The
 
calls
 
list
 
includes   calls   sent   and   received   in   the   vehicle   using   the  
connected

 
telephone.
*
 
Depending
 
on
 
the
 
compatibility   of   the   telephone.
Correction
 
allows
 
numbers
 
to
 
be
 
deleted
 
one
 
at
 
a
 
time. It
 
is
 
possible
 
to   make   a   call   directly   from   the   telephone;   park   the  
vehicle

 
first
 
as   a   safety   measure.

05


313
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
To display the "TELEPHONE "   menu:
-  
Make
  a   long   press   on  
SRC/TEL
.
-
 
Or
,   press   the   dial   to   display   the  
contextual

  menu.   Select   "Call"
  and  
confirm.
-
 Or

,   press   MENU, select "Telephone"
and
  confirm.   Select   "Call"   and
 confirm.
Select "

Directory"
  and   confirm. An
  incoming   call   is   announced   by   a   ring   and   a   superimposed   display  
in

  the   multifunction   screen.
Mobile
(depending
  on   the   information  
available

  in   the   contact   records   of  
the

  telephone   connected). "YES"
  to   accept   the   call   is   selected   by  
default.
Press

OK   to   accept   the   call.
Select "NO"
  and   confirm   to   reject   the  
call.
or
Press one of these buttons to accept
the

  call.
Making a call - From the directory of contacts
Select a contact then confirm.
Receiving a call
Select the number and confirm.A
 
long   press   on  
ESC
or on TEL,
SOURCE or SRC   also   rejects   an  
incoming

  call.
b
usiness
Home

05

314
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
During a call, press OK   to   display   the  contextual
  menu.
Hang up In
  the   contextual   menu:
-
 
select
  "Micro OFF" to switch off the
microphone.
-
 
deselect
  "Micro OFF" to switch the
microphone
  on.
Managing calls
A long   press   on   one   of   these   buttons  also
  ends   the   call.
In
  the   contextual   menu,   select   "Hang
up"   to   end   the   call. Secret - Mute
(so that the caller cannot hear)

05

315
C4-2_en_Chap13c_RD5_ed01-2014
In the contextual menu:
-  
select
  "Telephone mode " to
transfer
  the   call   to   the   telephone.
-
 
deselect
  "Telephone mode" to
transfer
  the   call   to   the   vehicle.
In
 
certain
 
cases,   the   combined   mode   has   to   activated   from   the  
telephone.
If

 
the
 
contact   has   been   cut   off,   when   you   reconnect   on   returning   to  
the

 
vehicle,
 
the   Bluetooth   connection   will   be   restored   automatically  
(depending

 
on   the   compatibility   of   the   telephone).
Combined mode
(to
 
leave
 
the
  vehicle   without   ending   the   call)
USING THE TELEPHONE
From the contextual menu, select
"DTMF tones"   and   confirm   to  
use

  the   digital   keypad   to   navigate   in  

the

  interactive   voice   response   menu.
From
  the   contextual   menu,  
select

"Switch"   and   conform   to   return  
to

  a   call   left   on   hold.
Interactive voice response
Consultation call

05


316
C4-2_en_Chap13c_RD5_ed01-2014
USING THE TELEPHONE
Directory
The system accesses the telephone's contacts directory, depending on
  compatibility,   and   while   the   Bluetooth   connection   with   it   is  
maintained.
With

  certain   telephones   connected   by   Bluetooth   you   can   send   a  
contact

  to   the   directory   of   the   audio   system.
Contacts
  imported   in   this   way   are   saved   in   a   permanent   directory  
visible

  to   all,   whatever   the   telephone   connected.
The
  menu   for   the   directory   is   not   accessible   if   it   is   empty.To
  modify   the   contacts   saved   in  
the

  system,   press   MENU then
select
"Telephone"   and   confirm.
Select "Directory management "
  and  
confirm.
Y

ou   can:
-
 
"
Consult an entry",
-
 
"
Delete an entry",
-
 
"
Delete all entries".
Select "Directory
" to see the list of
contacts.
Make
  a   long   press   on  
SOURCE
or SRC
for
  access   to   the   directory
or press OK,
  and
select "Call"
  and   confirm.

06


317
C4-2_en_Chap13c_RD5_ed01-2014
AUDIO SETTINGS
Press ¯ to display the audio settings menu.
Press
7 or 8   to   modify   the   selected  
setting.
Screen A
Press 5 or 6 for the previous or next setting  in   the   list.
The
 
Ambience,

 
T
reble   and   Bass   audio   settings   are   separate   and  
independent

 
for   each   sound   source.

06
318
C4-2_en_Chap13c_RD5_ed01-2014
Press ¯ to display the audio settings menu.
The
 
settings
 
available   are:
-
 
Ambience,
-

 
Bass,
-

 
T

reble,
-
 
Loudness,
-

 
Distribution:
  Personalised   or   Driver,
-
 
Left

 
/
 
right
 
balance,
-
 
Fader

 
(front   /   rear   balance),
-
 
Auto.

 
volume.
Screen C
The distribution (or spatialisation using the Arkamys© system), is an
 
audio
 
process
 
which
 
allows
 
the
 
sound
 
quality
 
to
 
be   improved  
according

 
to
 
the
 
setting
 
chosen,
 
corresponding
 
to
 
the   position   of   the  
listeners

 
in
 
the
 
vehicle.
AUDIO SETTINGS
Select and confirm " Other settings… "
to   display   the   next   setting   in   the   list. The
 
Ambience,
 
T
reble   and   Bass audio   settings   are   different   and  
independent

  for   each   sound   source.
On-board   audio:  
Arkamys© Sound Staging.
With
 
Sound
 
Staging,
 
the
 
driver   and   passengers   are   immersed   in   an  
"audio

 
scene"
 
recreating
 
the   natural   atmosphere   of   an   auditorium:  
truly

 
a
 
part
 
of
 
the
 
scene
 
and   its   surroundings.
This
 
new
 
sensation
 
is
 
made   possible   by   software   in   the   audio  
system

 
which
 
processes
 
the   digital   signals   from   the   media   players  
(radio,

 
CD,
 
MP3…)
 
without   changing   the   audio   settings.  
This
 
processing

 
takes
 
account
 
of   the   characteristics   of   the   passenger  
compartment

 
to
 
produce
 
optimum   results.
The
 
Arkamys© software installed in your audio system processes the
 
digital
 
signal   from   the   media   players   (radio,   CD,   MP3,   ...)   and  
recreates

 
a
 
natural   musical   scene,   with   harmonious   placement   of  
instruments

 
and   voices   in   the   space   in   front   of   passengers,   level  
with

 
the
 
windscreen.