rear view mirror Citroen C4 PICASSO 2008 1.G User Guide

1
102
III
B. PASSENGER’S CONTROL PANEL
Adjustment of temperature
- Press on button 1 to take over control of the tem-perature. The warning lamp on button 1 lights up.
- Rotate button 1 to adjust your temperature.
Note : The adjustment of the temperature is continuous and progressive starting from one side.
V E N T I L A T I O N - H E A T I N G M A N U A L A I R C O N D I T I O N I N G
Observation : If your vehicle is not equipped with air conditioning, you will have the same control panel but without the A/C button.
6 - Deicing / demisting of the rear screen
This operates only if the engine is running.
- Press on button 6 to activate/deactivate the electric deicing/demisting of the rear screen and the exterior rear view mirrors. The warning lamp lights up.
The deicing/demisting switches off automatically to prevent excessive consumption of power.
7 - Rapid deicing / demisting of front and rear windows and rear view mirrors
- Press on button 7. The warning lamp lights up.
This function simultaneously activates :
- front deicing/demisting,
- optimum fl ow of air,
- recirculation prohibition,
- deicing/demisting of rear view mirrors and heated rear screen,
- air conditioning if necessary.
To stop the function, press again on button 7.
8 - Adjustment of the air blower temperature
This control is for adjusting the temperature of the air in the passenger compartment. It can be used in cold weather as well as in hot weather, provided the air conditioning is active.
Note : The adjustment of the temperature is continuous and progressive starting from one side.

106
III
A U T O M A T I C A I R C O N D I T I O N I N G
6 - Adjustment mode for the rear passengers8 - Deicing / demisting of the rear screen
This can only operate when the engine is running.
- Press on button 8 to activate/deactivate the electric deicing of the rear screen and, according to version, of the exterior rear view mirrors. The warning lamp lights up and the symbol appears on the display.
It switches off automatically to prevent excessive con-sumption of power
9 - Rapid deicing / demisting of the front and rear windows
- Press on button 9. The warning lamp lights up.
This button decides whether or not the rear passengers may use their adjustment controls.
There are three possible statuses for this button :
Locking of the rear passenger controlsThe driver imposes his adjustment on the rear passengers.
Authorisation of the rear passenger controls
The rear passengers can use their adjustment controls at their conven-ience.
Closing of the air fl ow for the rear passengers
The supply of air is cut off.
7 - Panel display mode : black panel function
This function turns the displays and panel backlighting on or off.
- Function activated, a press on any button will light up the screen temporarily.
- A press on button 7 deactivates the function, lighting of buttons and screen is again permanent.
Note : This function optimises notably the visual com-fort for driving at night.
This function gives a rapid deicing / demisting of the vehicle simultaneously with :
- front deicing at optimum temperature,
- optimum air fl ow,
- recirculation prohibition,
- deicing of the rear view mirrors and heated rear screen,
- air conditioning, if necessary.
Press again on button 9 or on " AUTO " to stop the function. Deicing of the rear view mirrors and heated rear screen remains activated.
10 - Air conditioning
- Press on button 10 to activate the air conditioning.
The A/C warning lamp lights up.
With additional air conditioning, in cold weather you are advised to close the supply of air to the rear pas-sengers (no hot air distribution possible via these air vents).

12M
112
III
To recall a memorised driving position
Vehicle stationary, ignition switched on or engine running
- Press briefl y on button 1 or 2 to recallthe corresponding pre-set position.
Note : after fi ve consecutive re-calls of a pre-set position, the function will be deactivated until the engine is started.
Vehicle in motion
- Keep button 1 or 2 pressed to recall the corresponding pre-set position.
Memorisation of driving positions
You can pre-set two driving posi-tions via the buttons located on the side of the seat.
Memorising a driving position
To pre-set a driving position :
- With the ignition on, adjust your seat and your rear view mirrors.
- Press on button M then imme-diately on button 1 "fi rst driving position" or button 2 "second driving position".
The memorisation will be con-fi rmed by a sound signal. Memo-risation of a new position cancels the previous one.
Do not attempt to pre-set a driving position while the vehicle is moving.
D R I V E R ’ S S E A T

2
2
1
188
VIDirection indicators side repeaters in the rear view mirrors
To change the side repeater, press fi rmly downwards on the zone indi-cated by the arrow, then pull out the side repeater bulb.
C H A N G I N G B U L B S
Interior lamp (1)
Detach the cover of the interior lamp 1 with a thin screwdriver close to the button, to access the bulb.
Bulb : W 5 W
Spotlamps (2)
Detach the cover of the interior lamp. To access the bulb, detach the partition for the spotlamp con-cerned, as necessary.
Bulb: W 5 W
Boot lamps
Detach the unit by pushing it rear-wards.
Bulb: W 5 W
Torch
1. Open the tab.
2. Push with a fl at screwdriver in the hole under the tab and re-cover the bulb unit.
3. Open the bulb unit fully to change the bulb.
Bulb: Krypton 3.6V.