display Citroen C4 PICASSO 2008 1.G Owner's Manual

Page 12 of 266

4
3
2
1
AB
3
2
1
0
4
A
B
C
D
E
F
IN BRIEF
I
15
D R I V I N G
LIGHTING CONTROL
Ring A
1 Off
2 Automatic lighting
3 Sidelamps
4 Dipped beams / Main beams
Ring B
Front foglamps
Rear foglamps
Windscreen wiper
3 Rapid wipe.
2 Normal wipe.
1 Intermittent wipe.
0 Off.
4 Automatic wipe by pressing downwards, and single wipe.
Note : To deactivateautomatic wipe :
- go to position 1, then return to position 0.
Rear screen wipe
Stop.
Intermittent.
Timed wash and wipe.
A Warning lamps for direction indicators and vehicle lamps
B Audio system controls
C Multifunction display controls
D Horn
E Optional function controls
F Cruise control and speed limiter

Page 14 of 266

A
A
IN BRIEF
I
17
D R I V I N G
Electronic parking brake
This device combines :
- automatic functions :
Automatic application when the engine stops and automatic re-lease on use of the accelerator (automatic operation by default) ;
- manual use :
Permanent manual application / release of parking brake is pos-sible by pulling control A.
Navidrive Multifunction display
Before leaving the vehicle, check that the electronic parking brake warning lamp P (red) is perma-nently on.If you leave the vehicle with the engine running, manually apply the parking brake.Never leave a child alone inside the vehicle with the ignition on, as they could release the park-ing brake.
Parking space sensor
You can select the “parking space sen-sor” function by pressing on button A. Once the space has been measured, the function displays the following messages :
Warning lamps displaylamps displayWarning lamps displayps disInstrument panelpanelpanel
Multifunction display
Instrument panel
Parking possible
Parking diffi cult
Parking not advised
Hill start assist
To aid starting on a gradient, your vehicle is equipped with a system which keeps it immobilised for about 2 seconds, the approximate time it takes to move your foot from the brake pedal to the accel-erator pedal.

Page 15 of 266

IN BRIEF
I
18
Air recirculation, automatic (depending on version)
Automatic comfort regulation
Air
conditioning
Rapid deicing / demisting of front and rear windows and rear view mirrors
Adjustment and display of temperature(comfort requirement)
REST function REST(retention of ventilation with (retention of ventilation with the engine switched off)the engine switched of
Adjustment of air blower speed
Adjustment of air distribution
Mode of adjustment for rear passengers
Black panel function (extinction of air conditioning displays and button backlighting)
Deicing / demisting of rear screen and rear view mirrorsAdjustment of air blower speed
DRIVER’S AND PASSENGER’S CONTROL PANEL REAR PASSENGERS’ CONTROL
PANEL
V E N T I L A T I O NA u t o m a t i c a i r c o n d i t i o n i n g
With additional air conditioning (no warm air distribution)
Temperature adjustment

Page 16 of 266

IN BRIEF
I
19
V E N T I L A T I O NH e a t i n g a n d m a n u a l a i r c o n d i t i o n i n g
Display of air distribution
Adjustment of blown air temperature
Rapid deicing / demisting of front and rear windows and rear view mirrors
Adjustment and display of air blower speed
Adjustment of air distributionMode of temperature adjustment for passenger
Air recirculation
Air conditioning (not available in heating version)
Deicing / demisting of rear screen and rear view mirrors
Status of temperature adjustment (active/inactive)
Temperature adjustment
DRIVER’S CONTROL PANEL PASSENGER’S CONTROL PANEL

Page 17 of 266

A
IN BRIEF
I
20
M O N I T O R I N G
Seat belts not fastened / unfastened warning lamp
This warning lamp informs you if the driver’s or front passenger’s seat belt is not fastened (depend-ing on model), and if the front pas-senger’s (depending on model) or the second- and third-row passen-gers’ seat belts are unfastened. The lit up positions represent those whose seat belts are not fastened / unfastened.
Locking from inside
You can use electrical central locking or unlocking by pressing on button A.
If one of the doors is open or is not closed properly, central lock-ing will not work.
Anti-intrusion security
When starting the engine, the sys-tem automatically locks the doors once you reach approximately 10 km/h (approximately 6 mph).
Tyre defl ation detection
This function warns you if a tyre is defl ated or punctured.
This system does not absolve the driver of the need to regularly check the tyre pressures.
The SERVICE warning lamp lights up, and a ve-hicle outline is displayed, accompanied by a mes-sage and a sound signal.
Defl ation warning
The STOP warning lamp lights up, and a vehicle outline is displayed, ac-companied by a message and a sound signal.
Puncture

Page 28 of 266

123456
DC987BA
II
31
CENTRAL DISPLAY
1. Rev counter
2. Gearbox information
3. “Foot on brake” warning lamp
4. Speed indicator
5. Cruise control or speed limiter reference
6. Fuel gauge
7. Trip mileage recorder
8. Multifunction screen A
9. Maintenance indicator, when switching on ignition, then total mileage recorder
COMMAND BUTTONS
A. Lighting rheostat (available day and night)
B. Trip mileage recorder reset
C. Lighting rheostat (available day and night)
D. Check (list of alerts)
Warning lamps displayWarning lamps display
M O N O - T O N E I N S T R U M E N T P A N E L E LLM U L T I F U N C T I O N S C R E E N A

Page 30 of 266

123456
DC987BA
32
II
CENTRAL DISPLAY
1. Rev counter
2. Gearbox information
3. “Foot on brake” warning lamp
4. Speed indicator
5. Cruise control or speed limiter reference
6. Fuel gauge
7. Trip mileage recorder
8. Multifunction screen C
9. Maintenance indicator, when switching on ignition, then total mileage recorder
COMMAND BUTTONS
A. Lighting rheostat (available day and night)
B. Trip mileage recorder reset
C. Personalisation of the instrument panel (display of desired information)
D. COLOUR (choice of background colour)
This button offers you a whole range of colour backgrounds, from white to blue.
Warning lamps displayWarning lamps display
B I - T O N E I N S T R U M E N T P A N E LM U L T I F U N C T I O N S C R E E N C

Page 32 of 266

124
C
9876
B
35
D
A
II
33
CENTRAL DISPLAY
1. Cruise control or speed limiter reference
2. Speed indicator
3. NaviDrive display (see NaviDrive instructions)
4. Rev counter
5. “Foot on brake” warning lamp
6. Fuel gauge
7. Trip mileage recorder
8. Maintenance indicator, when switching on ignition, then total mileage recorder
9. Gearbox information
COMMAND BUTTONS
A. Personalisation of the instrument panel (display of desired information)
B. COLOUR (choice of background colour)
This button offers you a whole range of colour backgrounds, from white to blue.
C. Lighting rheostat (available day and night)
D. Trip mileage recorder reset
N A V I D R I V E I N S T R U M E N T P A N E LM U L T I F U N C T I O N S C R E E N D T

Page 43 of 266

L
J
H
MR
OO
M
JLH
OO
R
K
N
44
II
M U L T I F U N C T I O N S C R E E N A
To display the log of alerts :
1. Press on O.
2. Use J or M to select the sub-menu for options. Confi rm with two presses on L.
Note : You can cancel the start of the display by pressing button R to abandon and validating by pressing L.
Alerts signalled previously but not resolved, will scroll in the display for recall.
To adjust the date and the time :
1. Press on O.
2. Use J or M to select the sub-menu for Display Adjustments, then confi rm by pressing L.
3.Press J or M to select what you want to modify : year, month, day, hour, minutes, mode of display.
4. Make your adjustment by press-ing K or KN. You can continue your adjustments by selecting a different element by presses on J or M. When you have fi nished your adjustments, press L.
To choose the language :
1. Press on O.
2. Use J or M to select the sub-menu for Languages. Confi rm your choice with a press on L.
3. With presses on K or KN, select the language of your choice, then validate with a press on L.
To choose units :
1. Press on O.
2. Press J or M to select the sub-menu for Units. Confi rm your choice with a press on L.
3. Press J or M to select the type of unit you wish to modify (Tem-perature or Fuel Consumption).
4. With presses on K or N, select the unit of your choice, then validate with a press on L.
Note : This choice concerns all the information (Consumption - Speed) appearing on the displays.

Page 44 of 266

123
L
J
H
MR
OII
45
M U L T I F U N C T I O N S C R E E N C
Main Menu
Press on the button O to view the "Main Menu" of the multifunction screen. This menu gives you ac-cess to the following functions :
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.
1 - Time
2 - Outside temperature
3 - Date and display zone
When the outside temperature is between +3 °C and -3 °C, the dis-play of temperature fl ashes (ice risk).Radio-CD
(See Radio-CD)
Trip computer, for :
- Entering the distance to your destination
- Access to the log of alerts (recall of alerts signalled previously)
- Access to the status of functions, such as automatic headlamps and windscreen wipe.
Personalisation -Confi guration, for activating/deactivating :
- operation of the rear wiper
- automatic guide-me-home lighting- Xenon dual-function directional headlamps
- electronic parking brake automatic functions (application / release)
- door selectivity
- lighting of daytime-running lampsand for choosing :- brightness intensity, time, date and units
- the display language
Bluetooth® hands-free kit
(See Radio-CD)
Note : The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the "Main Menu"
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the func-tion chosen or the value modifi ed
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed permanently (date, radio-CD, trip computer) on the right of the screen

Page:   1-10 11-20 21-30 31-40 41-50 ... 80 next >