Citroen C4 PICASSO 2010.5 1.G Owner's Manual

245
05
1
2
3
5
6
7
8
4
CONFIGURING THE FILTERING OF
TMC ANNOUNCEMENTS
Turn the dial and select the "Traffi c information" function.
Press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the "Filter traffi c information" function.
Turn the dial and select the fi lter of your choice.
Select the "Geographic fi lter" function and press the dial to confi rm.
The fi lters are independent and one replaces the other.
We recommend:
- a fi lter of 6 miles (10 km) around the vehicle in heavy tra ffi c,
- a fi lter of 30 miles (50 km) around the vehicle or a fi lter on the route for motorway journeys.
Select "OK" and press the dial to confi rm.
The TMC (Traffi c Message Channel) messages provide information relating to the traffi c and the weather conditions, received in real time and C (Traffi c Message Channel) messages provide information C (Traffi c Message Channel) messages provide information
communicated to the driver in the form of audible announcement s and relating to the traffi c and the weather conditions, received in real time and relating to the traffi c and the weather conditions, received in real time and
icons on the navigation map. The guidance system may then suggest a diversion route.
Press the dial to confi rm the selection.
Filter traffi c information
OK
Geographic fi lter
On the route
Around the vehicle

246
05
1
2
3
4
5
6
8
7
TRAFFIC INFORMATION
CONFIGURING THE DISPLAY OF
TMC MESSAGES
Turn the dial and select the "Traffi c information" function.
Press the MENU button.
Turn the dial and select the "Confi gure message announcement" function.
Press the dial to confi rm the selection.
Select the "Read messages" tab.
Press the dial to confi rm the selection.
Select "OK" and press the dial to confi rm.
The Traffi c Information Messages will be read by the voice synthesiser.
Select the "New message display" tab.
The traffi c information messages are extended to the fi lters selected (geographic...) and can also be displayed when guidance is not active.
We recommend that you do not select the "New message display" tab for regions with heavy traffi c.
Confi gure message announcementOK
Read messages
New message display

247
06
1
2
4
3
1
2
4
3
AUDIO/VIDEO
RADIO
Press the BAND button to select a waveband: FM1, FM2, FMast, AM.
Press the SOURCE button several times in succession and select RADIO.
Press the LIST button to display the list of stations received locally (60 maximum).
To update this list, press for more than two seconds.
Press one of the buttons to carry out a manual search of the radio stations.
Briefl y press one of the buttons to carry out an automatic search of the radio stations.
RDS
Select "Audio functions" then press "OK".
Press the MENU button.
RDS, if displayed, enables you to continue listening to the same station by automatic retuning to alternative frequencies. H owever, in certain conditions, coverage of an RDS station may not be a ssured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
Select "Activate RDS" then press "OK". RDS appears on the screen.
Select the "FM waveband preferences" function then press "OK".
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio equipment.
SELECTING A STATION
FM waveband preferences
Activate RDS

248
06
1
2
AUDIO/VIDEO
MP3 CD
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3, is an audio compression standard which permits the recording of several tens of music fi les on a single disc.
Empty CDs are not recognised and may damage the system.
It is advisable to restrict fi le names to 20 characters without using special characters (e.g. " ? ; ù) to avoid any playing or displayin g problems.
The audio system will only play fi les with the extension ".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No other type of fi le (.wma, .mp4, .m3u...) can be played.
If the player already contains a disc, press the SOURCE button several times in succession and select CD to listen to it.
Insert circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may generate malfunctions regardless of the quality of the original player.
Insert an audio CD or an MP3 compilation in the player, play begins automatically.
The play and display of an MP3 compilation may depend on t he disc burning software and/or the settings used. We recommend use of the ISO 9660 fi le system format.
Press one of the buttons to select a track on the CD.
Press the LIST button to display the list of tracks on the CD or of the folders of the MP3 compilation.
CD
PLAYING A CD OR AN MP3 COMPILATION INFORMATION AND ADVICE
In order to be able to play a recorded CDR or CDRW, when recording, the ISO 9660 level 1.2 or Joliet fi le format is recommended.
If the disc is recorded in another format, it may not be playe d correctly.
It is recommended that the same recording format is always used for an individual disc, with as low a speed as possible (4x maximum) for optimum sound quality.
In the particular case of a multi-session CD, the Joliet format is recommended.

249
06
1
2
1
AUDIO/VIDEO
USING THE USB PORT
USB stick (1.1, 1.2 and 2.0):
- the USB sticks must be in FAT or FAT 32 format (NTFS not supported),
- navigation through the fi le base is by means of the steering wheel controls.
The audio fi les are transmitted from a USB stick to your audio system, to be listened to via the vehicle's speakers.
Do not connect a hard drive or USB equipment other than USB sticks in FAT 16 or FAT 32 format (NTFS not supported). This could damage your installation.
Do not connect a hard drive or USB equipment other than USB sticks in FAT 16 or FAT 32 format (NTFS not supported). This could damage your installation.
Connect the stick to the port, directly or using a lead. If the audio equipment is switched on, the USB source is detected as soon as it is connected. Play begins automatically after a delay which depends on the ca pacity of the USB stick.
The fi le formats recognised are .mp3 (mpeg1 layer 3 only).
The list of compatible equipment is available from CITROËN dealers.
CONNECTING A USB STICK

250
06
1
2
4
3
5
1
2
3
AUDIO/VIDEO
PLAYING AN MP3 USB MEMORY STICK
If another source is being played, press the SOURCE button several times in succession and select "USB" to play it.
Connect a USB memory stick to the port provided.
To eject the USB memory stick, use the short-cut menu (press OK) or press the MENU button, select "Audio functions", "USB", then select "Eject USB".
The play and display of an MP3 compilation may depend on the fi le format used.
Select "USB" and press the dial to confi rm.
Insert a USB memory stick in the space provided and press the MENU button.
JUKEBOX
USB
Select "Complete disc" to copy the entire USB memory stick and press the dial to confi rm.
Complete disc
Select "Copy USB to jukebox" and press the dial to confi rm.
Copy USB to jukebox
Select "Audio functions" and press the dial to confi rm.
Press one of the buttons to select a track on the USB memory stick.
Press the LIST button to display the list of folders on the MP3 USB memory stick.
COPYING AN MP3 USB MEMORY STICK ONTO THE HARD DIS K
In order to be read, the USB memory stick must be formatted FAT 16 or 32. The player only reads USB memory sticks.

251
06
1
2
4
3
6
5
AUDIO/VIDEO
JUKEBOX
Select "Audio functions" then select CD and press the dial to confi rm.
Insert an audio CD or an MP3 compilation and press the MENU button.
Select "Copy CD to jukebox" and press the dial to confi rm.
Select the letters one by one and select "OK" to confi rm.
The "Auto creation" tab automatically copies the CD by default into an album of the type "album n°...".
It is not possible to copy fi les from the Jukebox to a CD.
The "Stop the CD copy" action does not delete the fi les which have already been transferred onto the jukebox hard disk.
The audio or MP3 CD is copied onto the hard disk. Copying may take up to 20 minutes depending on the length the CD . While copying is in progress, it is not possible to listen to albums previously copied to the hard disk or to CDs.
COPYING A CD ONTO THE HARD DISK
If it is not an MP3 CD, the Jukebox automatically compresses the CD in MP3 format. The compression may take approximately 20 minutes depending on the length the CD. During this compression phase, it is possible to listen to the CD or to al bums previously copied to the hard disk.
A long press on the SOURCE button starts copying of the CD.
Audio functions
OK
Copy CD to jukebox
Select "Complete CD" to copy the entire CD and press the dial to confi rm.
Complete CD
To stop the copy, repeat points 2 and 3. Select "Stop copy" and press the dial to confi rm.
Stop copy

252
06
1
2
3
4
1
2
3
AUDIO/VIDEO
Select "Audio functions" and press the dial to confi rm.
Press the MENU button.
JUKEBOX
RENAMING AN ALBUM
Select the "Jukebox" function and press the dial to confi rm.
Jukebox
Select the "Jukebox management" function and press the dial to confi rm.
Jukebox management
Press the LIST button.
Press the SOURCE button several times in succession and select the "Jukebox" function.
Press the ESC button to return to the fi rst fi le level.
Turn the dial to select the fi les.
JUKEBOX
LISTENING TO THE JUKEBOX
Jukebox

253
06
5
6
7
8
AUDIO/VIDEO
Select the "Rename" tab and press the dial to confi rm.
Select the album to be renamed and press the dial to confi rm.
Use the alphanumeric keypad to enter the letters of the album title one by one.
Turn the dial and select the letters of the album title one by one confi rming each time by pressing the dial.
Rename To rename the tracks of an album, follow the same procedure, selecting the tracks to be renamed.
Use the ESC button to exit from the list of tracks.
Select "OK" and press the dial to confi rm.
Select the "Delete" function to delete an album or a track from the Jukebox.
Delete
OK

254
06
1
2
AUDIO/VIDEO
Connect the portable device (MP3 player…) to the audio sockets (white and red, RCA type) located in the glovebox using a suitable audio cable (JACK or RCA).
Press the MENU button then select the "Confi guration" function, then "Sounds", then "Activate auxiliary source" to activate the NaviDrive audio/telephone auxiliary input.
It is not possible to copy the fi les onto the hard disk via the auxiliary input.
Press the SOURCE button several times in succession and select AUX.
USING THE AUXILIARY INPUT (AUX)
AUDIO (JACK/RCA) CABLE NOT SUPPLIED
Display and control is on the portable device.