Citroen C4 PICASSO 2013 1.G Owner's Manual

369369

05

These functions are only available if Risk Areas have been
downloaded and installed on the system. Select "Settings".

Select "Alert confi g.".


Risk area alert settings
It is then possible to activate Risk Areas alerts then:
-
"Audible warning"
- "Alert only when navigating"
- "Alert only for overspeed"
- "Displa
y speed limits"
- Timin
g: the choice of timing allows the time before giving a Risk Area alert to be defi ned.
Select "Confi rm".
Press on Navigationto display the primary page then go to the secondary page.
NAVIGATION - GUIDANCE

370
05

Adding a waypoint
Organising waypoints

Select "Enter destination ".

Select "Itinerary
".

Select "Add waypoint
" then "Enter address".


The address of the waypoint is entered in
the same way as a destination, so enter
the " City:" or post code, the "Road:" andthe " N°:". Confi rm each time.
Th
en select " Add waypoint".
Select the waypoint that you want to move in
the order.
To or
ganise waypoints, carry out the previous operations 1 to 3
again (Adding a waypoint).

Select "Up
".

Select "Down".

Select "Delete
".

Select "Road map
" to view the changes made
to the route.
Select "Navigate to".
Select the criteria then "Confi rm " to start
guidance and give the general direction of the navigation route.

Pr
ess on Navigation
to display the primary page then go to the secondary page.
NAVIGATION - GUIDANCE

371
05






Route options


Calculation criteria

Select "Settings".

Select "Criteria". It is then possible to choose:


- the navi
gation criteria: " Fastest
", "Shortest", " Time/distance","Ecological".


- the exclusion criteria: "Include tollroads" , "
Include ferries ", "Traffi c ", "Strict ", "Close".

Select "Confi rm".


Press Navigation
to display the primary page
then go to the secondary page.
NAVIGATION - GUIDANCE
The ecological calculation is based on mapping data but this maynot always be correct.

372
05









Traffic information

Select "Traffi c messages
".
Press on Navigation
to display the primary page then go to the secondary page.

Select the message from the list offered.

Select the magnifying glasses to have the
information spoken.
Set the " On the route", " Around
", "Near destination
" fi lters to fi ne-tune the list .
Press a
gain to remove the fi lter.
Select " Settings
".
Select:
- "
Warn of new messages
",
- " Speak messa
ges
",
Th
en enter the fi lter radius. Pr
ess on Navigation
to display the primarypage then go to the secondary page.


Display of messages Setting fi lters
We recommend a fi lter radius of:
- 12 miles
(20 km) in urban areas,
- 30 miles
(50 km) on motorways.


TM
C (Traffi c Message Channel) messages contain information on
traffi c and weather conditions, received in real time and transmitted
to the driver in the form of audible announcements and symbols on
the navigation map.


Select " Confi rm".
TRAFFIC
Select " Info option ".

373
05
Red and yellow triangle: traffi c information, for example:
Main traffi c symbols
Black and blue triangle: general information, for example:
Receiving TA messages
TRAFFIC
Select "Settings".
Press on Navigation
to display the primarypage then go to the secondary page.
Select " Voice ".

Activate
/ Deactivate "Traffi c (TA)".
The TA
(Traffi c Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffi c report
is transmitted, the current audio source (Radio, CD, USB, ...) is interrupted automatically to play the TA message. Normal playbackof the audio source resumes at the end of the transmission of the message.

05
374

Diverting from a route


Press on Navigation
to display the primary page then go to the secondary page.

Select "Traffi c messages
".

Select "Diversion ".

Select the diversion distance by pressing+ or -.
Select " Recalculate route". The route
will be modifi ed in time and distance.
Select " Confi rm".
The route may be diverted following the reception of a traffi c
information message.

TRAFFIC

375
05

Map settings
Map orientation

Select "Map settings".

Select "Orientation
".
Select:
- " Flat view north heading
" to keep the map
alwa
ys North up,
- " Flat view vehicle headin
g
" to have the map follow the direction of travel,
-"
Perspective view" to display a perspective view.

Press on Navigationto display the primary page then go to the secondary page.

Select " Confi rm
" to save the modifi cations.

05
376
Street names are visible on the map from the 100 m scale.

Confi gure
Select " Aspect".
Select:
- "
"Day" map colour" to have the map ralways in day mode.
- "
"Night" map colour" to have the map ralways in night mode.
-"Automatic da
y/night" to have
the brightness of the map adjustedautomatically according to the ambient lightlevel.
Thi
s mode makes use of the vehicle's
sunshine sensor or by manual operation of
the vehicle's lighting.Select " Map settings".
Press on Navigationto display the primarypage then go to the secondary page.
MAP

Then " Confi rm
" to save the modifi cations.

377
05






Navigation speech synthesis
Volume / Street names
Select " Settings
".
Select " Voice synthesis". Select "Confi rm
" to save the modifi cations.

Press on Navigation
to display the primarypage then go to the secondary page.
SETTINGS
Select " Voice synthesis" and/or "Male voice"and/or " Female voice" and/or "Speak roadnames ".

06
378
CONFIGURATION
Level 1Level 2Level 3
















"Configuration"
Primary page
Audio settings
Choice of colours
Audio settings
Audio settings