Button Citroen C5 2008 (RD/TD) / 2.G User Guide

Page 23 of 240

26
II
B
A
C
A N T I - I N T R U S I O N A L A R M
Operating the alarm
First make sure all the doors are closed.
The alarm is armed by pressing button C on the remote control.
With the alarm armed, the protec-tions are active after 5 seconds (perimeter) and 45 seconds (volu-metric).
When the alarm is armed (on standby), any intrusion will trigger the siren for 30 seconds, accom-panied by the direction indicators lighting up.
The alarm then goes back on standby. The triggering remains memorised. The warning lamp on button A fl ashes quickly when the alarm is deactivated by pressing the unlocking button B. This fl ash-ing stops when you switch on the ignition.
Deactivating the volumetric detection
You can operate the alarm with perimeter protection only, by deac-tivating the volumetric protection (if for example you wish to leave an animal in the vehicle).
Deactivation of the volumetric detection
Switch off the ignition.
Within 10 seconds, press button Auntil the warning lamp remains on permanently.
Exit the vehicle.
Lock or deadlock the vehicle with the remote control locking button.
The light on button A fl ashes once a second.
Note: It is recommended to deacti-vate the volumetric detection when washing the vehicle in order to pre-vent the random triggering of the alarm.
Automatic activation (depending on country)
The alarm is armed automatically, 2 minutes after the last door, or the boot, has been closed.
In order to prevent the alarm from triggering when you open one of the doors or the boot, it is essen-tial to press the unlocking button Bagain on the remote control.
The siren is also triggered if there is a cutting of the electrical sup-ply. To stop it, restore the electrical supply then press on the unlocking button B.
Note:If you want to lock your vehicle without arming the alarm, just lock with the key only.If you lock your vehicle and a door, or the boot, is still open, the central locking does not operate but the alarm will arm itself after approx. 45 seconds.
Note: The siren is automatically deactivated (for example for dis-connecting the battery) as soon as the vehicle is unlocked using the remote control.

Page 34 of 240

36
II
A
I N S T R U M E N T P A N E L
C H E C K S / O I L L E V E L
Engine oil level indicator
When you switch the ignition on, the engine oil check is displayed for a few seconds on the instru-ment panel screen.
Note: to ensure that this meas-urement is accurate, check the oil level on horizontal ground after the engine has been switched off for at least 15 minutes. An incorrect engine oil level can seriously dam-age your engine.
“Oil level incorrect” indicates that the oil level is too low.
Check using the manual dipstick. See “Levels”.
If, after topping up, the message re-appears, contact a CITROËN If, after topping up, the message If, after topping up, the message
dealer.
“Oil level measurement invalid” indicates a malfunctioning of the indicator.
Contact a CITROËN dealer.
“Oil level correct” indicates nor-mal operating.
Log of alerts
This function allows you to display the log of alerts.
Press on button A. The following messages appear consecutively on the instrument panel screen:
Tyre pressure check.
Maintenance indicator reminder.
Display of message alerts.
Oil level check.

Page 36 of 240

38
II
A
Resetting to zero of the maintenance indicator
If you are carrying out the service yourself, the procedure for resetting to zero is as follows:
Swicth off the ignition, then move the key to position S, anti-theft.
Press on button A and keep it pressed.
Switch on the ignition. The instrument panel screen counts down from 10 to 0 and displays the maintenance symbol.
Hold down button A until the zero appears and the maintenance symbol disappears.
Switch off the ignition.

Page 52 of 240

55
II
C
B
D
A
F R O N T S E A T S
E L E C T R I C A L A D J U S T M E N T S
The Welcome function
When the driver's door is opened and the ignition is off, the seat moves to ease accessing or leav-ing the vehicle.
Take care not to hinder the for-wards or backwards movement of the seat.
You may activate or deactivate this function using the “Main Menu” on the instrument panel screen. To do so, select “Vehicle parameters / Comfort / Driver welcome”.
Head restraint height and angle adjustments on electric seats
To adjust the angle of the head restraint, push back or pull forward section C of the head restraint until you reach the desired position.
To raise it, pull upwards.
To lower it, press on the control Dto unlock it, and simultaneously on the head restraint itself.
To raise it, press control D to unlock it, then pull it upwards.
0: Off.
1: Gentle.
2: Medium.
3: Strong.
Controls for the heated seats
The front seats can be heated indi-vidually. With the engine running, use control A, located beside the seats to choose between three heating levels:
Massage function
This function provides the driver with a back massage.
To activate the massage, with the engine runnuing, press on but-ton B. The warning lamp comes on and the massage function is acti-vated for a period of 1 hour. During this time, massage is performed in cycles of 6 minutes (4 minutes of massage followed by 2 minutes break). In total, the system will per-form 10 cycles.
After 1 hour, the function is deacti-vated. The warning lamp goes out.
You can deactivate the massage function at any time by pressing on button B.

Page 53 of 240

57
II
1
2
R E A R V I E W M I R R O R S
Operation
Press on button 1.Warning lamp 2 on: automatic mode.
Warning lamp 2 off: automatic mode stopped. The mirror remains in its lightest defi nition.
Note: In order to ensure optimal visibility when manoeuvring, the interior and exterior rear view mir-rors lighten when reverse gear is engaged.

Page 57 of 240

61
II
BDC
A
BC
A
E
1234
M U L T I F U N C T I O N D I S P L A Y
T E L E M A T I C S
Controls
A. Access to the telematics multi-function display menu.
B. Cancellation of the operation or return to the previous display.
C. Scrolling through the menus of the telematics multifunction dis-play. Validation using steering wheel controls.
D. Validation using radio panel.
E. Selection of the type of informa-tion presented on the telemat-ics multifunction display (date, radio/CD/CD MP3/CD changer/jukebox, navigation information, telephone).
Traffi c information
See NaviDrive instructions.
Navigation/guidance
See NaviDrive instructions.
Audio
See NaviDrive instructions.
Main Menu
Press on button A to display the telematics multifunction display “Main Menu”. This menu gives you access to the following functions:
Telephone and telematic services
See NaviDrive instructions.
Map
See NaviDrive instructions.
1 Outside temperature.
2 Date.
3 Telephone.
4 Time.
When the outside temperature is between +3 °C and –3 °C, the temperature display fl ashes (risk of ice).
Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is stationary in bright sunlight.
The driver is advised not to use the controls described opposite whilst driving.
Confi guration,
allows you to adjust various settings (date, time...).
Video Menu,
allows you to adjust vari-ous video settings.

Page 63 of 240

67
II
A
B
A U T O M A T I C G E A R B O X
Operation in SPORT or SNOW automatic mode
Lever at D:
Press on button A to select the SPORT driving mode.
Press on button B to select the SNOW driving mode.
Pressing again on button A or Breturns you to NORMAL driving mode.
NORMAL mode is selected by default when the engine is started. This driving mode is suitable for normal driving conditions.
No warning lamp will light up in the instrument panel.
SNOW mode facilitates starting and smooth driving when road adherence con-ditions are poor.
The instrument panel display lights up.
SPORT mode is for more responsive driving, to pro-vide maximum perform-ance and acceleration.
The instrument panel display lights up.
Remark: The driving mode selected before you switched off the engine will be retained the next time you start up.
If there is an operat-ing fault, the gearbox is stuck in a gear, do not exceed 100 km/h (approx. 60 mph).
Juddering may be felt when selecting R for reverse gear or when returning to posi-tion D.
Consult a CITROËN dealer as soon as possible.
Do not stop your engine if the gear selector lever is in position D or R.

Page 65 of 240

69
II
3
5
4
2
1
C R U I S E C O N T R O L
To cancel the functionPress on button 5.
Select the cruise control func-tion.
Or stop the engine.
The speed that was chosen is no longer memorised.
If there is a malfunction, a mes-sage is displayed accompanied by a sound signal and lighting of the SERVICE warning lamp.
Contact a CITROËN dealer.

Page 66 of 240

70
II
3
5
4
2
1
A
S P E E D L I M I T E R
This driving aid allows you to choose a maximum speed that you do not wish to exceed. This has to be over 30 km/h (19 mph).
The speed limiter controls are located on the steering wheel.
Note: The speed limiter informa-tion is displayed in zone A of the instrument panel.
To select the function
Press on button 4 to select speed limiter mode “LIMIT”.
The selection is confi rmed by the display of the function in zone A of the instrument panel.
To adjust the maximum speed
With the engine running, you can adjust the memorised maximum speed, displayed in zone A, by pressing on:Button 1 to increase the memo-rised maximum speed.
Button 2 to decrease the mem-orised maximum speed.
Remark: Successive presses will modify the cruise speed in steps of 1 mph and a continuous press in steps of 5 mph.

Page 67 of 240

71
II
3
5
4
2
1
A
S P E E D L I M I T E R
Suspension or resumption of maximum speed
Press on button 3.
Temporary override of the maximum speed
The accelerator pedal has an end-of-travel switch. In order to exceed the memorised maximum speed at any time, you can press the pedal all the way down. While the speed is being exceeded, the speed dis-played in zone A will fl ash. You have only to release the accelera-tor pedal to return below the maxi-mum speed, to restore the func-tion.
Remark: the speed will also fl ash if the speed limiter is not able to prevent the vehicle from exceeding the programmed speed (e.g. on a steep descent or under excessive acceleration).
To reactivate the speed limiter, release the accelerator to slow to a speed lower than the programmed speed.
To cancel the functionPress on button 5.Select the speed limiter func-tion.
Or stop the engine.
The speed that was chosen is no longer memorised.
If there is a malfunction, a mes-sage is displayed accompanied by a sound signal and lighting of the SERVICE warning lamp.
Contact a CITROËN dealer.

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 80 next >