sensor Citroen C5 DAG 2010.5 (RD/TD) / 2.G Owner's Guide

X
162
C H E C K S
BLEEDING THE DIESEL FUEL FILTER
Protective cover
Removal of the cover Bleeding water from the fuel
filter
Bleed regularly (at each oil change).
To bleed the water, slacken the bleed
screw or the water in diesel fuel sen-
sor, located at the base of the fi lter.
Continue until all the water has
fl owed out.
Then retighten the bleed screw or
the water detection sensor.

HDi 110, HDi 160 and
V6 HDi 240 engines

 Pull the protective cover upwards
to remove it.

HDi 140 engine

 Remove the protective cover
by first unclipping at 3 , then 1
and 4 .

 Unclip at 2 by pulling towards
you, then lift up. Refi tting

 Firstly clip in at 2 .

 Lower and centre the cover.

 Clip in at 3 and 4 , pushing verti-
cally and gently from the rear.

 Clip in at 1 pushing vertically.

XI
190
P R A C T I C A L I N F O R M A T I O N
FUSEBOX A Table of fuses

Fuse N° Rating
Function

G29 - -

G30 5 A Heated door mirrors

G31 5 A Rain and brightness sensor

G32 5 A Seat belt not fastened warning lamps

G33 5 A Electrochrome rear view mirrors

G34 20 A Sunroof (saloon)

G35 5 A Passenger door lighting - passenger door mirror adjustment

G36 30 A Electric tailgate (Tourer)

G37 20 A Heated front seats

G38 30 A Driver’s electric seat

G39 30 A Passenger’s electric seat - HIFI amplifi er

G40 3 A Trailer relay unit supply
FUSEBOX B

Fuse N° Rating
Function

G36
15 A 6 speed automatic gearbox

5 A 4 speed automatic gearbox

G37 10 A Daytime running lamps - Diagnostic socket

G38 3 A ESP

G39 10 A Hydraulic suspension

G40 3 A STOP switch