Citroen C8 2008.5 1.G Owner's Manual

Page 231 of 250

5
02
DVD/DIVX play menuVCD/CD play
menuMP3 CD play
menu JPEG images CD
play menuThis is not a touch screen. Never press
the surface of the screen directly as this
may damage the liquid crystal display.
GENERAL MENU
The use of a non-abrasive cloth
(spectacles cloth), without any additional
products, is recommended for maintenance
of the TFT/LCD screen.

Page 232 of 250

6
1
2 1
2 1
2
03
12
UP EJECT
SMART
MODE DISC IN
ARTDEDISC IN
POWER
STOP
DVDAV1
MULTIMEDIA SYSTEM ON/OFF BASIC FUNCTIONS
To switch on the multimedia system, switch on
the vehicle's ignition.
Press the POWER button on the roof console
display or on the remote control. Play begins automatically.
To load a disc, insert it gently, printed
face uppermost, until it is fully
inserted.
Press the EJECT button on the roof
console display.
Remove the disc gently.
LOADING/EJECTING A CD

Page 233 of 250

7
1
21
3
2
SUB-T
SETUP
MODE
DVDAV1 AV2
DVD
AV1 AV2
To activate the screen, press the
release button on the screen and pull
it down gently.
Never press the surface of the screen directly. Thi
s
could damage the liquid crystal display.
Raise the screen to deactivate it.
The auxiliary equipment indicator light
LED comes on on the equipment's
control panel.
TFT/LCD SCREEN ACTIVATION/DEACTIVATION
Press the MODE button on the roof
console display, select one of the AV
sources DVD/DIVX, AV1 and AV2.
MODE
The screen can be tilted by approximately 30° to ob tain an ideal
viewing angle. The AV source selected appears on the
screen.

Page 234 of 250

8
1
03
2
3
AUTO
ON
OFF
AUTO
ON OFF
AUTO
ON
OFF
AUTO ON
OFF
MODE
PLAYDOWN
BASIC FUNCTIONS
ADDITIONAL LIGHTING
For permanent lighting, set the
additional lighting switch to ON.
For automatic lighting, set the
additional lighting switch to AUTO.
The roof console display additional
lighting is then controlled by the
passenger compartment lighting.
To deactivate the lighting, set the
additional lighting switch to OFF.

Page 235 of 250

9
13
03
4
SMART
SMART
MODE DISC IN
SEL
VOL+
VOL-
DVD
AV1AV2
MODE
2 The SMART mode can only be activated after
inserting a disc in the player.
The SMART mode is deactivated automatically when
the equipment is switched off.
Press the SMART button on the
remote control to activate the SMART
mode. The SMART indicator light
LED comes on.
Using the MODE button, connect
the AV1 and AV2 inputs to the AV
outputs. Press the SEL button one or more
times to display the TFT/LCD screen
settings table.
Press the VOL- or VOL+ button to
change the setting selected.
Press the ENTER button the save the
changes and exit screen setup.
BASIC FUNCTIONS
SMART MODE

Page 236 of 250

10
1
2
1
2
3
4
STOP
03BASIC FUNCTIONSPLAYING/SKIPPING A CHAPTER OR
TITLE PAUSE/FAST SEARCH
Press the n button twice to stop play and return to
the first title/chapter of the CD inserted. The pla yer
is now set to STOP.
Press the
5 button to access
the next chapter/title. Press the 6 button to access the previous
chapter/title.
Press one of the
5 6 buttons
during play to change
Press the
 button to continue
play from the stored position.
Press the
n button to stop play.
The player stores the current
position of the CD.
DVD/DIVX fast search function:
2x, 4x, 6x, 8x, 20x.
VCD/CD/MP3 fast search function:
2x, 4x, 6x, 8x.
To carry out a fast search during
play, press button
7 or 8.
Each time this button is pressed, the
speed of the forwards/backwards
fast search increases progressively.
To activate/deactivate the pause
function during play, press the

button.

Page 237 of 250

11
1
2
1
2
3
43
REPEAT
03BASIC FUNCTIONS
REPEATING A CHAPTER/TITLE
Press the 6 button and select the
REPEAT OFF function. The REPEAT
function is deactivated.
Press the
6 button and select
the TITLE REPEAT function. The
equipment repeats the current title.
In DVD/DIVX mode, press the 6
button and select the CHAPTER
REPEAT function. The equipment
repeats the current chapter.
Press the REPEAT button one or
more times to set the repetition of the
chapter/title.
Press the 6 button and select
the REPEAT ALL function. The
equipment repeats all of the titles on
the CD.
In VCD/CD mode, press the
6
button and select the REPEAT ONE
TITLE function. The equipment
repeats the current title.
Press the 6 button and select the
REPEAT OFF function. The REPEAT
function is deactivated.

Page 238 of 250

12
03
4
3
2
1
1
2
2
52
DISP
DISP
BASIC FUNCTIONS
DURATION DISPLAY
Press the DISP button a third time.
The information relating to the total
duration of the chapter elapsed
appears.
Press the DISP button again. The
information relating to the total
duration of the title remaining
appears.
The following information appears
on the screen: title number and total
number of titles, chapter number and
total number of chapters and total
duration of play elapsed.
Press the DISP button to display the
duration concerning the DVD/DIVX
currently being played.
Press the DISP button during play
to display the duration information
concerning the MP3 CD currently
being played on the screen.
Each time the DISP button is pressed,
the duration display changes in
the following order: TITLE TIME
ELAPSED, TITLE TIME REMAINING,
TOTAL ELAPSED, TOTAL
REMAINING, OFF. Press the DISP button during play
to display duration information
concerning the CD/VCD on the
screen.
A subsequent press of the DISP button clears the
duration display.
Press the DISP button a fourth time.
The information relating to the total
duration of the chapter remaining
appears. Each time the DISP button is pressed,
the duration display changes in
the following order: CHAPTER
ELAPSED, CHAPTER REMAINING.
TITLE 02/05 CHAPTER 001/02701 : 14 : 39
TITLE REMAIN 01 : 14 : 39
CHAPTER ELAPSED 00 : 03 : 56
CHAPTER REMAIN 00 : 03 : 56
00 : 03 : 56
TITLE REMAIN 01 : 14 : 39
CHAPTER REMAIN 00 : 03 : 56

Page 239 of 250

13
1
03
2
3
2
3
4
MENU
TITLE
ENTER
ENTER
BASIC FUNCTIONSMENU FUNCTION/MENU BUTTON
During play, press the MENU button.
The DVD main menu is displayed.
Move the cursor using the 5 or 6
button on the menu offered.
Press the ENTER button to conirm
your choice. Press the ENTER button to conirm
your choice.
During play, press the TITLE button.
The TITLE menu is displayed.
If several titles are recorded on a
DVD/DIVX, you can select the title of
your choice via the titles menu.
MENU FUNCTION/TITLE BUTTON
Move the cursor using the 5 or 6
button.

Page 240 of 250

14
1
2
1
1
03
SUB-T
ENTER
AUDIO
AUDIO
If the DVD inserted has only one dialogue language,
the symbol  is displayed in the top left corner of the
screen when the AUDIO button is pressed.
Press the SUB-T button one or more
times while the DVD/DIVX is being
played.
Select and validate the language of
the subtitles.
Press the AUDIO button one or more
times while the VCD/CD is being
played to select the Audio mode of
your choice.
Select and validate one of the
following functions: STEREO (L&R),
MONO LEFT (L), MONO RIGHT (R).
Press the AUDIO button one or more
times while the DVD/DIVX is being
played to select the language of your
choice.
BASIC FUNCTIONS
SELECTING THE LANGUAGE
If the DVD/DIVX inserted does not have subtitles,
the symbol  is displayed in the top left corner of the
screen when the SUB-T button is pressed.

Page:   < prev 1-10 ... 191-200 201-210 211-220 221-230 231-240 241-250 next >