Citroen GRAND C4 PICASSO RHD 2016 2.G Owner's Manual

139
+. Control  paddle   for   changing   up,   to   the   right  o
f   the   steering   wheel.
F

P
ull the " +"
  paddle   towards   you   to   change   up.
-.
 C

ontrol   paddle   for   changing   down,   to   the  
l

eft   of   the   steering   wheel.
F

P
ull the " -"
  paddle   towards   you   to   change  
d

own.
Steering mounted control paddles
The steering mounted control paddles cannot   be   used   to   select   neutral   or   to  
s

elect   or   come   out   of   reverse. When
  you   move   the   gear   selector,   the   symbol  
c

orresponding   to   its   position   is   displayed   in   the  
in

strument
 pan
el.
P.
 Pa
rk.
R.
 R
everse.
N.
 N
eutral.
D.
 D
rive
 (
automatic
 ope
ration).
1 to 6.   Gears   engaged   in   manual   operation.
-.
 I
nvalid   value   in   manual   operation.
Displays in the instrument panelMoving off
F With
  your   foot   on   the   brake   pedal,   select  p
osition P or N .
F
 
S
tart   the   engine.
If P
  is   displayed   in   the   instrument   panel,  
a

lthough   the   gear   selector   is   in   another  
p

osition,   place   the   gear   selector   in  
p

osition P   to   be   able   to   start   the   engine.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
S
elect   automated   mode   (position   D),
manual
  mode   (position   M) or reverse
(position R ).
If
  you   do   not   press   the  
b

rake   pedal   to   come   out   of  
p

osition P,
  this   warning   lamp  
I
f   these   conditions   are   not   met,   there  
i

s   an   audible   signal   accompanied   by   a  
m

essage.
or
  symbol   appears   in   the   instrument  
p

anel,   accompanied   by   the   message  
"

Place   automatic   gearbox   in   position P",
flashing
  of   P   in   the   instrument   panel  
a

nd   an   audible   signal.
4
Driving

140
F Check  that   the   symbol   displayed   in   the  i
nstrument   panel   agrees   with   the   position  
o

f   the   selector.
F
 
P
rogressively   release   the   brake   pedal.
F
 
I
f   the   parking   brake   is   released,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and  
a

utomatic
 ope
ration
 i
s
 a
ctivated,
 a
ccelerate
 a

way.
Never
  press   the   accelerator   and   brake  
p

edals   at   the   same   time.   Braking   and  
a

cceleration   should   be   done   only   with  
t

he   right   foot.   Pressing   both   pedals  
t

ogether   risks   damaging   the   gearbox.
If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed. Never
  leave   children   unsupervised   in  
t

he   vehicle   when   the   engine   is   running.
When
  carrying   out   a   maintenance  
o

peration   with   the   engine   running,  
a
pply  
t

he   parking   brake   and   select   position   P. Never select position P or R unless the
vehicle
  is   at   a   complete   stop   with   the  
br

ake
 a
pplied.
When
  you   want   to   engage   reverse,  
t

o   avoid   jolts,   do   not   accelerate  
i

mmediately   after   engaging   R.
Changing
 in

to
 p
osition
 R
is
accompanied
  by   an   audible   signal.
Never select position N
  when   driving.  
I

f position N is   engaged   in   error   when  
m

oving,   allow   the   engine   to   idle,   then  
e

ngage   position   D   to   accelerate.
When
  the   engine   is   running   at   idle,  
b

rakes   released,   if   position   R, D or M is
selected,
  the   vehicle   will   move   even   if  
t

he   accelerator   is   not   pressed.
Driving

141
Invalid value in manual operationThis   symbol   is   displayed   if   a   gear   is  
n

ot   engaged   correctly   (gear   selector  
b

etween   two   positions).
You
 
can
 
temporarily
 
take
 
control
 
of
 
gear
 c

hanges
 
using
 
the
 
"
+ "
 
and
 
"
- "
 
steering
 
mounted
 c

ontrol
 
paddles.
 
If
 
the
 
engine
 
speed
 
allows,
 
the
 i

nstruction
 
to
 
change
 
gear
 
is
 
acted
 
on.
This function allows you to anticipate certain
situations
 
s

uch
 
a

s
 
ov

ertaking
 
a

nother
 
v

ehicle
 
o

r
 a
pproaching
 
a
 
bend.
After
 
a
 
few
 
moments
 
with
 
no
 
action
 
on
 
the
 
c

ontrol
 
paddles,
 
the
 
gearbox
 
manages
 
the
 
g

ears
 
automatically
 
again.
Temporary manual control of the
gears
Manual mode
D and the gear engaged are displayed in the in strument pan el.
The
  gearbox   operates   in   auto-active  
m

ode,   without   any   action   from   the   driver.   It  
c

ontinuously   selects   the   most   appropriate   gear  
a

ccording   to   the   following   conditions:
-
 
o
ptimisation   of   fuel   consumption,
-
 
d
riving   style,
-
 
r
elief   of   the   road,
-
 
v
ehicle   load.
Automated mode
F Select position D .
For
 
maximum   acceleration,   without   touching  
t

he
 
gear
 
selector,   press   the   accelerator   fully  
d

own
 
(kick   down).   The   gearbox   changes   down  
a

utomatically   and   maintains   the   gear   selected  
u

ntil
 
the
 
maximum   engine   speed   is   reached.
When
 
braking,   the   gearbox   changes   down  
a

utomatically   for   more   effective   engine   braking.
When
 
you   take   your   foot   off   the   accelerator  
p

edal
 
suddenly,   the   gearbox   does   not   change  
u

p,
 
so
 
as
 
to   improve   safety. F
Sel ect position M.
F

U
se the "+"
  and   "- "
  steering   mounted  
c

ontrol   paddles   to   change   gear.
The
  gears   engaged   are   displayed   successively  
i

n   the   instrument   panel.
When
  stationary   or   at   very   low   speed,   the  
g

earbox   automatically   engages   1st
 g
e a r.
In
  manual   mode,   it   is   not   necessary   to   release  
t

he   accelerator   pedal   when   changing   gear.
The
  change   from   one   gear   to   another   is   only  
e

ffected   if   the   conditions   of   vehicle   speed   and  
e

ngine   speed   allow;   other wise   the   automatic  
l

aws   of   operation   are   imposed   temporarily.
If
  the   engine   speed   is   too   high   or   too   low,  
t

he   display   of   the   gear   selected   flashes   for   a  
f

ew   seconds,   then   the   new   gear   engaged   is  
d

isplayed.It
  is   possible   to   change   mode   at   any  
t

ime,   by   moving   the   gear   selector  
f

rom D to M   or   the   other   way   round.
4
Driving

142
Before switching off the engine, you can change   to   position   P or N   to   be   in   neutral.  
I

n   either   case,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle,   unless   it   is   programmed  
i

n   automatic   mode.
If the lever is not in position P ,
  on   opening   the  
d

river's   door   or   approximately   45   seconds   after  
s

witching   off   the   ignition   there   is   an   audible  
s

ignal   and   a   message   appears:
F
 
m
ove   the   gear   selector   to   position   P;   the  
a

udible   signal   stops   and   the   message  
d

isappears.
Operating fault
Whenever parking, you must apply the parking brake   to   immobilise   the   vehicle,   if   automatic  
o

peration   has   been   deactivated.
Parking the vehicle
In all circumstances, ensure that the gear   selector   is   in   position   P before
leaving
  your   vehicle. In the event of a fault with the
gearbox,
  the   service   warning   lamp  
c

omes   on   in   the   instrument   panel,  
a

ccompanied   by   a   message   and   an  
a

udible
 s
ignal.
In   this   case   the   gearbox   goes   into   back-up  
m

ode   and   stays   in   3
rd gear. You may then feel a n
oticeable
 
jolt
 
when
 
going   from   P to R   and   from  
N

to R .
 
This
 
jolt
 
does
  not   present   any   risk   to   the  
g

earbox.
Do
 
not
 
exceed
 
60
 
mph   (100   km/h)   while   also  
o

bserving
 
legal
 
speed   limits.
Have
 
it
 
checked
 
by
 
a
  CITROËN   dealer   or   a  
q

ualified
 w

orkshop.
In the event of a battery failure, use the
chock
 
to
 
immobilise
 
the
 
vehicle.
Driving

143
Depending on the driving situation and your vehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   or   more   gears.
You
  can   follow   this   instruction   without   going  
t

hrough   the   intermediate   gears..
Gear efficiency indicator
System which reduces fuel consumption by recommending the most suitable gear.
T he   system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (gradient,   load, ...)  
a

nd   the   demands   of   the   driver   (power,  
a

cceleration,   braking,   ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear.
The
  information   appears   in   the   instrument  
p

anel   in   the   form   of   an   arrow.
On
  vehicles   with   manual   gearbox,   the   arrow  
m

ay   be   accompanied   by   the   recommended  
g

e a r.
The gear engagement recommendations
must not be considered compulsory.
This is because the configuration of the
road, traffic density and safety remain
impor tant factors in the choice of the best
g e a r.
The
  gear   efficiency   indicator   system   does   not  
r

eplace   the   need   for   vigilance   on   the   part   of   the  
d

river.
With
  an   automatic   gearbox,   the   system   is   only   active   in   manual   mode.
On
  BlueHDi   Diesel   135   and   150   versions   with  
m

anual   gearbox,   in   certain   driving   conditions  
t

he   system   may   suggest   changing   into   neutral  
s

o   that   the   engine   can   go   into   standby   (STOP  
m

ode   with   Stop   &   Start).   In   this   case,   N is
displayed
  in   the   instrument   panel.Example:
This
  function   cannot   be   deactivated.
-
 
Y
ou   are   in   third   gear.
-
 
Y
ou   press   the   accelerator   pedal.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
4
Driving

144
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument panel   and   the   engine   goes   into   standby  
au

tomatically:
-
 
w
ith a manual gearbox ,
  at   speeds   below  
1

2   mph   (20   km/h),   or   vehicle   stationary  
(

with   PureTech   130,   THP   165   and  
B

lueHDi 100,   115   and   120   versions),   when  
y

ou   place   the   gear   lever   in   neutral,   and   you  
r

elease   the   clutch   pedal,
-
 
w
ith an automatic gearbox , with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
a

t position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
The
  Stop   &   Start   system   does   not   affect  
t

he functionality of the vehicle, such as
for
  example,   braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(10
  km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   selected,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, this indicator lamp flashes for   a   few   seconds   then   goes   off.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the
 
system,
 
a
 
time
 
c

ounter
 
calculates
 
the
 
sum
 
of
 
the
 
periods
 
in
 
S

TOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 t
he
 
START/STOP
 
button.
Driving

145
Going into engine START mode
This indicator lamp goes off and the engine s tarts a utomatically:
-
 
w

ith a manual gearbox , when you fully
depress
  the   clutch   pedal,
-
 
w

ith an automatic gearbox :
●
 
g

ear   selector   in   position   D or M, when
you
  release   the   brake   pedal,
●
 
o

r
 
gear   selector   in   position   N   and   brake  
p

edal   released,   when   you   place   the   gear  
s

elector at position D or M ,
●
 
o

r
 
when   you   engage   reverse. START
  mode   is   invoked   automatically   when:
-  y ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   15   mph  
(

25   km/h)   with   a   manual   gearbox   (2   mph  
(

3   km/h)   with   PureTech   130,   THP   165   and  
B

lueHDi   100,   115   and   120   versions)   and  
2 m

ph   (3   km/h)   with   an   automatic   gearbox,
-
 
t
he   electric   parking   brake   is   being   applied,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
Special cases: START invoked
automaticallyIn some circumstances, such as the need to maintain   a   comfortable   temperature   in   the  
p

assenger   compartment,   it   may   be   necessary  
t

o   deactivate   the   Stop   &   Start   system.
The
  system   can   be   deactivated   at   any   time,  
o

nce   the   ignition   is   on.
If
  the   engine   is   in   STOP   mode,   it   then   restarts.
The
  Stop   &   Start   system   is   automatically  
r

eactivated   every   time   the   ignition   is  
s

witched on.
Manual deactivation/
reactivation
In this case this indicator lamp flashes for   a   few   seconds,   then   goes   off.
This operation is perfectly normal. Select
  "Stop   &   Start"   to   deactivate   the   system.
This   is   confirmed   by   the   illumination  
o

f   this   indicator   lamp.
Using   the   dynamic   cruise   control  
d

eactivates   the   Stop   &   Start   system.
Deactivation
  of   Stop   &   Start   is   done   in   the  
D

riving
 
menu   of   the   touch   screen   tablet.
Select   "Stop   &   Start"   again   to   reactivate   the  
s

ystem.
This   is   confirmed   by   the   illumination  o
f   this   indicator   lamp.
4
Driving

146
Operating fault
Have it checked by a CITROËN dealer or a qualified w orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the   vehicle
 m

ay   stall.
All
  of   the   instrument   panel   warning   lamps   come on.
Depending on version, an alert message may also   be   displayed,   asking   you   to   place   the   gear  
s

elector lever at position N   and   put   your   foot   on  
t

he   brake   pedal.
It is then necessary to switch off the ignition and start   the   engine   again   using   the   "START/STOP" b

utton.
In the event of a fault with the system, this   indicator   lamp   flashes   for   a   few m

oments
 t
hen
 c
omes
 o
n
 c
ontinuously,
 a

ccompanied   by   a   message.
Opening the bonnet
Before
 
doing
 
anything
 
under
 
the
 
b

onnet,
 
deactivate
 
the
 
Stop
 
&
 
Start
 
s

ystem
 
to
 
avoid
 
the
 
risk
 
of
 
injury
 
related
 
t

o
 
an
 
automatic
 
change
 
to
 
START
 
m

ode.
Driving on flooded roads
Before
 
driving
 
through
 
a
 
flooded
 
road,
 
i

t
 
is
 
strongly
 
recommended
 
that
 
you
 
d

eactivate
 
the
 
Stop
 
&
 
Start
 
system.
For
 
more
 
information
 
on
 
Driving
advice ,
 
particularly
 
on
 
flooded
 
roads,
 
r

efer
 
to
 
the
 
corresponding
 
section. The
  Stop   &   Start   system   requires   a  
b

attery   of   advanced   technology   and  
sp

ecial
 c
haracteristics.
All
 
work   on   this   type   of   battery   must  
o

nly
  be   done   by   a   CITROËN   dealer  
or
 
a
  qualified   workshop.
For
 
more   information   on   the  
12 V
batter y ,
  refer   to   the   corresponding  
s

ection.
Driving

147
Memorising speeds
Memorising
This function allows speeds to be saved, which can then be offered to set the two systems: the speed limiter (to limit the speed of the vehicle) or the c
ruise   control   (for   a   vehicle   cruising   speed).
You
  can   memorise   up   to   six   speed   settings   for   each   of   the   two   systems.   By   default,   some   speed   settings   are   already   memorised.
F
 
S
elect   the   system   for   which   you   want   to  
m

emorise   new   speed   settings.
This function is accessible in the Driving
 

menu  
o

f   the   touch   screen   tablet.
F

Sel
ect the " Driving assistance " tab, then
Speed settings .
F
 
P
ress   the   button   corresponding   to   the  
s

peed   setting   you   want   to   modify.
As
  a   safety   measure,   the   driver   must  
c

arry out these operations when
stationary.
F
 
E
nter   the   new   value   using   the   numerical  
k

eypad   and   confirm.
4
Driving

148
Speed limit recognition
This system allows the speed limit detected by t
he   camera   to   be   displayed   in   the   instrument  
pan

el.
Specific
  speed   limits,   such   as   those   for   heavy  
g

oods   vehicles,   are   not   displayed.
The
  display   of   the   speed   limit   in   the   instrument  
p

anel   is   updated   as   you   pass   a   speed   limit   sign  
i

ntended   for   cars   (light   vehicles).
The
  units   for   the   speed   limits   (mph   or  
k

m/h)   depend   on   the   country   you   are  
d

riving   in.
It
  should   be   taken   into   account   so   that  
y

ou   observe   the   speed   limit.
For
  the   system   to   operate   correctly  
w

hen   you   change   country,   the   units   for  
s

peed   in   the   instrument   panel   must   be  
t

hose   for   the   country   you   are   driving   in. The
  automatic   reading   of   road   signs   is   a  
d

riving   assistance   system   and   does   not  
a

lways   display   speed   limits   correctly.
The
  speed   limit   signs   present   on   the  
r

oad   always   take   priority   over   the  
d

isplay   by   the   system.
The
  system   cannot   in   any  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The
  driver   must   observe   the   driving  
r

egulations   and   must   adapt   the   speed  
o

f   the   vehicle   to   suit   the   weather   and  
t

raffic.
It
  is   possible   for   the   system   to   not  
d

isplay   the   speed   limit   if   it   does   not  
d

etect   a   speed   limit   sign   within   a   preset  
p

eriod.
The
  system   is   designed   to   detect   signs  
t

hat   conform   to   the   Vienna   Convention  
o

n   road   signs.
To
  maintain   correct   operation   of   the  
s

ystem:   regularly   clean   the   area   in   front  
o

f   the   camera.Principles
Using a camera at the top of the windscreen, this   system   detects   and   reads   speed   limit   and  
e

nd   of   speed   limit   signs.
The
  system   also   takes   account   of   information  
o

n   speed   limits   from   the   navigation   system  
ma

pping.
Driving