buttons Citroen GRAND C4 PICASSO RHD 2016 2.G User Guide

Page 97 of 523

95
Dual-zone manual air conditioning with temperature regulation
The air conditioning system only works with the engine r unning.
The
  temperature   at   the   nozzles   and   vents  
i

s   regulated   by   the   system   according   to   the  
t

emperature   in   the   passenger   compartment  
a

nd   the   temperature   setting.
Press the button for the Air conditioning
menu
  to   display   the   system   controls   page.Temperature adjustment
F Press one of these buttons to   reduce   (blue)   or   increase  
(

red)   the   value.
Air flow adjustment
Press one of these buttons to
increase  or   decrease   the   speed   of  
t

he   air   booster   fan.
The
 
driver
 
and
 
front
 
passenger
 
can
 
each
 
adjust
 t
he t
emperature i
ndependently.
The value indicated corresponds to a level of c
omfort   and   not   to   a   temperature   in   degrees   Celsius o

r   Fahrenheit   (depending   on   the   unit   selected).
A
  setting   of   around   21   provides   optimum   comfort.
 D

epending   on   your   requirements,   a   setting   between
 1

8   and   24   is   normal.
In addition, it is recommended that a difference between   left   and   right   of   more   than   3   should   be  
av

oided. The
  air   flow   symbol   (a   fan)   fills   progressively  
a

ccording   to   the   quantity   of   air   wanted.
By   reducing   the   air   flow   to   minimum,   you   are  
s

topping
 v
entilation.
Avoid   driving   for   too   long   without  
v

entilation   (risk   of   misting   and  d
eterioration   of   air   quality).
3
Ease of use and comfort

Page 98 of 523

96
Air intake / Air recirculation
The intake of exterior air prevents the formation of   mist   on   the   windscreen   and   side   windows.
The recirculation of interior air isolates the
passenger
  compartment   from   exterior   odours  
a

nd   smoke.
F

P
ress the button to choose
how
  air   enters   the   passenger  
c

ompartment.
Air conditioning On / Off
Switching on
Switching off
The air conditioning does not operate when   the   air   flow   adjustment   is   set  
t

o off. F

P
ress this button to activate the
air   conditioning   system.
Avoid
 
driving
 
for
 
too
 
long
 
without
 
r

ecirculation
 
of
 
interior
 
air
 
(risk
 
of
 
m

isting
 
and
 
deterioration
 
of
 
air
 
quality).
This
 
function
 
allows
 
hot
 
or
 
cold
 
air
 
to
 
be
 
d

elivered
 
selectively
 
and
 
more
 
quickly.
The
 
air   conditioning   is   designed   to   operate
 e

ffectively   in   all   seasons,   with   the   windows   closed.
It
 
enables   you   to:
-
 l

ower   the   temperature,   in   summer,
-
 i

ncrease   the   effectiveness   of   the   demisting   in
 w

inter,   above   3°C.
F  
P
ress   this   button   again   to  
d

eactivate   the   air   conditioning  
s

ystem.
Air distribution
adjustment
These buttons are used to arrange the   distribution   of   air   in   the   passenger  
c

ompartment   by   combining   several   air   outlets.
Windscreen.
The
  air   distribution   can   be   adapted   by   using  
s

everal   buttons:   illumination   of   the   button  
c

onfirms   the   presence   of   fan   boosted   air   in   the  
d

irection   indicated,   the   button   illumination   off  
i

ndicates   the   absence   of   fan   boosted   air   in   the  
d

irection
 i
ndicated.
For
  a   uniform   distribution   of   air   in   the  
p

assenger   compartment,   the   three   buttons   can  
b

e
 us
ed
 s
imultaneously.Footwells.
Central
  and   side   vents.When
  the   indicator   lamp   is   off,   air   is   taken   from  
o

utside   the   vehicle.   When   the   indicator   lamp   is  
o

n,   air   is   recirculated   from   inside   the   vehicle,  
t

he   intake   for   air   outside   the   vehicle   is   inhibited.When
  the   indicator   lamp   is   on,   the   air  
c

onditioning   function   is   activated.
When
  the   indicator   lamp   is   off,   the   air  
c

onditioning   function   is   deactivated.
Ease of use and comfort

Page 99 of 523

97
Dual-zone automatic air conditioning
This air conditioning system operates with the   engine   running,   but   the   ventilation   and   its  
c

ontrols   are   available   with   the   ignition   on.
Operation
  of   the   air   conditioning   and   regulation  
o

f   temperature,   air   flow   and   air   distribution   in  
t

he   passenger   compartment   are   automatic.Temperature adjustment
1. Driver/passenger side t emperature adj
ustment.
2.
 A

ir
 d
istribution
 a
djustment.
3.
 A

ir   flow   adjustment.
4.
 A

ir   intake   /   air   recirculation.
5.
 A

ir   conditioning   On   /   Off.
6.
 A

utomatic   mode.
7.
 A

ccess   to   the   secondary   page.The
  driver   and   front   passenger   can   each   set  
t

he
 t
emperature
 i
ndependently.
F
P
ress one of these buttons
to   increase   or   decrease   the  
va

lue.
The   value   indicated   corresponds   to   a   level   of  
c

omfort   and   not   to   a   precise   temperature.
It
  is   recommended   that   you   avoid   a   left /right  
s

etting   difference   of   more   than   3.
Press the button for the Air conditioning

menu
 
to
 
display
 
the
 
controls
 
for
 
the
 
air
 
c

onditioning
 
system.
Air flow adjustment
Avoid driving for too long with the v
entilation   off   (risk   of   misting   and  
d

eterioration   of   air   quality).
F

P
ress one of these buttons to
increase   or   decrease   the   speed  
o

f   the   booster   fan.
The
 
air   flow   symbol   (a   fan)   is   filled   in  
p

rogressively   in   relation   to   the   quantity   of   air  
w

anted.
By
 
reducing   the   air   flow   to   minimum,   you   are  
s

topping
 v
entilation.
" - - - "
 
is   displayed.
3
Ease of use and comfort

Page 100 of 523

98
The air distribution in the passenger compartment   can   be   adjusted   by   combining   the  
u

se   of   several   vents.
Air distribution adjustment
Windscreen.
Footwells.
Centre
  and   side   vents.
The
 
air
 
distribution   can   be   varied   by   using  
m

ore
 
than   one   button:   illumination   of   the  
b

utton
 
indicates   that   air   is   distributed   in   that  
d

irection;
 
no   illumination   indicates   that   air   is   not  
d

istributed   in   that   direction.
In
 
AUTO
 
mode,   all   three   buttons   are   off.Switching off Switching on
Air conditioning On/Off
The air conditioning is designed to operate e
fficiently   in   all   seasons,   with   the   windows  
c

losed.
It
  allows   you:
-
 
i
n   summer,   to   lower   the   temperature,
-
 
i
n   winter,   above   3   °C,   to   improve   demisting.
Avoid
  prolonged   operation   of   the   air  
r

ecirculation   function   (risk   of   misting  
a

nd   of   deterioration   of   the   air   quality).
When
  the   indicator   lamp   is   off,   the   intake   of  
e

xterior   air   is   active.
When
  the   indicator   lamp   is   on,   air   recirculation  
i

s   activated,   the   intake   of   exterior   air   is  
in

hibited.F

P
ress this button to choose
the
  mode   for   air   entry   to   the  
p

assenger
 c
ompartment.
The
  intake   of   exterior   air   avoids   misting   of   the  w
indscreen   and   side   windows.
Air
  recirculation   prevents   exterior   odours  
a

nd   smoke   from   entering   the   passenger  
c

ompartment.
This
  function   also   allows   faster   heating  
o

r   cooling   of   the   air   in   the   passenger  
c

ompartment.
Air intake/Air recirculation
F Press  this   button   again   to   switch  o
ff   the   air   conditioning.
When
 
the
  indicator   lamp   is   off,   the   air  
c

onditioning   system   is   off.
F

P
ress this button to switch on the
air
 c
onditioning.
When
 
the
  indicator   lamp   is   on,   the   air  
c

onditioning   system   is   on.
The
 
air
 
conditioning   cannot   operate   when   the  
a

ir
 
flow
 
is
  set   to   off.
Ease of use and comfort

Page 103 of 523

101
Settings for
passengers in
the 3
rd row of seats
F Press   the   vent   cover.
F  A djust   the   flow   of   air   to   the   two   vents   using  
t

he   four-position   wheel   (off,   low,   medium,  
h

i g h).
F
 
D
irect   the   vent   by   turning   the   cover.
Ventilation with ignition on
function
With the ignition on, you can use the ventilation   system   and   have   access   to   the   Air
conditioning
 

menu   to   adjust   the   air   flow   and  
a

ir   distribution   in   the   passenger   compartment.
This
  function   is   available   for   a   few   minutes,  
d

epending   on   the   state   of   charge   of   the   battery  
o

f   your   vehicle.
This
  function   does   not   activate   the   air  
c

onditioning.
You
  can   make   use   of   the   residual   heat   in   the  
e

ngine   to   warm   the   passenger   compartment  
u

sing   the   temperature   setting   buttons.
3
Ease of use and comfort

Page 155 of 523

153
Switching on / Pause
F Turn  thumbwheel   1 to the "LIMIT"  position:  t
he   speed   limiter   mode   is   selected   but   is  
n

ot   switched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4,
  if   the   speed   displayed  
i

s   suitable   (by   default,   the   last   speed  
pro

grammed).
F
 
Y
ou   can   temporarily   stop   the   speed   limiter  
b

y   pressing   button   4   again:   the   display  
c

onfirms   that   it   has   been   stopped   (Pause).You
  do   not   have   to   switch   the   speed   limiter   on  i
n   order   to   set   the   speed.
Once
  the   function   is   selected,   you   can   modify  
t

he   speed   setting   by:
-
 
u
sing   buttons   2   and   3,
  raising   or   lowering  
t

he   speed   displayed   :
F
 
b
y   successive   short   presses,   to   modify  
b

y   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
Adjusting the speed limiter
setting
- pressing  button   5:
F  t he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
p
ress   the   button   corresponding   to   the  
l

imit   speed   chosen.
The
  value   is   displayed   in   the   instrument   panel.
The selection screen closes after a few
moments.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  value   is   then   displayed   in   the   instrument  
pan

el.
For
  more   information   on   Speed limit
recognition
 

and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
4
Driving

Page 158 of 523

156
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed   speed   flashes.
The
  display   becomes   steady   again   once   the  
v

ehicle   returns   to   the   cruise   speed   setting.
Switching off
F Turn  thumbwheel   1 to the "0" p osition. T
he   display   of   information   related   to   the  
c

ruise   control   disappears.
Switching on
Once the cruise control is switched on, you can   modify   the   cruising   speed   in   one   of   the  
f

ollowing
 w
ays:
-
 
u
sing   buttons   2 or 3:
F
 
b
y   successive   short   presses,   to   modify  
t

he   speed   by   +   or   -   1   mph   (km/h),
F
 
b
y   a   long   press,   to   modify   the   speed   in  
s

teps   of   +   or   -   5   mph   (km/h),
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speeds   are   displayed  
i

n the touch screen tablet,
F
 
c
hoose   a   value:   it   is   displayed   in   the  
in

strument
 pan
el.
The selection screen closes after a few
moments.
The
  modification   is   then   accepted.
F
 
T

urn
 
thumbwheel
 
1 to the "CRUISE"

position:
 
the
 
cruise
 
control
 
mode
 
is
 s
elected
 
but
 
is
 
paused.
F
P
ress button 2 or 3 :
 
your
 
vehicle's
 
current
 
s

peed
 
becomes
 
the
 
cruise
 
speed.
The
 
cruise
 
control
 
is
 
activated
 
(ON).
Modification of the cruise speed
(speed setting)
- by   pressing   button   5, if your vehicle has
speed   limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  value   is   then   displayed   in   the   instrument  
pan

el.
For
  more   information   on   Speed limit
recognition
 

and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Pause
You can pause the cruise control at any time by   pressing   button   4:
  the   screen   confirms   the  
pa

use.
Driving

Page 159 of 523

157
Flashing of the dashes indicates a fault with the cruise   control.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating faultWhen the cruise control is switched on, be   careful   if   you   maintain   the   pressure  
o

n   one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in   a  
v

ery   rapid   change   in   the   speed   of   your  
v

ehicle.
Do not use the cruise control on
slippery
  roads   or   in   heavy   traffic.
On
  a   steep   descent,   the   cruise   control  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed   speed.
On
  steep   climbs   or   when   towing,   the  
p

rogrammed   speed   may   not   be   reached  
o

r   maintained.
The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   cruise   control.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
4
Driving

Page 162 of 523

160
1. Select  cruise   control   mode.
2. U se   the   current   speed   of   the   vehicle   as  
t

he   cruise   speed   setting   /   Lower   the   speed  
se

tting.
3.
 U

se   the   current   speed   of   the   vehicle   as  
t

he   cruise   speed   setting   /   Raise   the   speed  
se

tting.
4.
 P

ause   /   Resume   the   cruise   control.
5.
 D

isplay   the   list   of   memorised   speeds,   or
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
 S

elect   the   inter-vehicle   distance   ("Close ",
" Normal ", "Distant ")
For
  more   information   on   Memorising speeds,
refer
  to   the   corresponding   section.
For
  more   information   on   Speed limit
recognition
 

and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Steering mounted controls
Switching on
The active cruise   control   must   be   selected   in  t
he Driving  menu.
F
 
T
urn   the   thumbwheel   1 to the "CRUISE"
position:
  cruise   control   mode   is   selected,  
b

ut   is   paused.
F

P
ress one of the buttons 2 or 3 :
  the   current  
s

peed   of   your   vehicle   becomes   the   cruise  
s

peed   setting.
The
  cruise   control   is   activated   (ON).
By
  default,   the   inter-vehicle   time   is   set   at  
2 s

econds.
Other wise,
  the   last   speed   value   set   will   be   used  
f

or   operation   of   the   system.
Modification of the cruise control
speed
- using  buttons   2   or   3:
F  b y   successive   short   presses,   to   modify  
b

y   steps   of   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speed   settings   are  
d

isplayed   in   the   touch   screen   tablet,
F
 
c
hoose   a   speed   setting:   it   is   displayed   in  
t

he   instrument   panel.
The selection screen closes after a few
moments.
  The   modification   is   then   taken   into  
a

ccount.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  speed   setting   is   then   displayed   in   the  
in

strument
 pan
el.
As
 
a
 
precaution,
 
it
 
is
 
recommended
 
that
 
y

ou
 
select
 
a
 
speed
 
setting
 
close
 
to
 
the
 
c

urrent
 
speed
 
of
 
your
 
vehicle.
Operation
For more information on Speed limit
re cognition  and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Driving

Page 166 of 523

164
In the event of a fault with the dynamic cruise control,   you   are   alerted   by   an   audible   signal  
a

nd   the   display   of   the   message   "Driving   aid  
f

unctions
 f
ault".
Have
  the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop. When
  the   cruise   control   is   working,   take  
c

are   if   making   a   maintained   press   on  
o

ne   of   the   cruise   control   programmed  
s

peed   modification   buttons:   this   can  
l

ead   to   a   very   quick   change   in   the  
s

peed   of   your   vehicle.
Do
  not   use   the   dynamic   cruise   control  
o

n   slippery   sur faces   or   in   heavy   traffic.
When
  descending   a   steep   hill,   the  
c

ruise   control   may   not   be   able   to  
p

revent   the   vehicle   from   exceeding   the  
pro

grammed
 s
peed.
When
  ascending   a   steep   hill   or   when  
t

owing,   it   might   not   be   possible   to   attain  
o

r   maintain   the   programmed   speed.
Operating fault
The operation of the radar, located in the   front   bumper,   may   be   disturbed   by  
a

ccumulations   of   grime   (dust,   mud...)  
o

r   in   certain   weather   conditions   (snow,  
i

ce...).
The
  message   "SYSTEM   INACTIVE:  
V

isibility   reduced"   is   displayed   to   signal  
t

hat   the   system   has   been   put   into  
s

t a n dby.
Clean
  the   front   bumper   regularly.
The
 
use
 
of
 
mats
 
not
 
approved
 
by
 
C

ITROËN
 
may
 
inter fere
 
with
 
the
 
o

peration
 
of
 
the
 
cruise
 
control.
To
 
avoid
 
any
 
risk
 
of
 
jamming
 
the
 
pedals:
-
 
e

nsure
 
that
 
mats
 
are
 
secured
 
c

o r r e c t l y,
-
 
n

ever
 
fit
 
one
 
mat
 
on
 
top
 
of
 
another.
Driving

Page:   < prev 1-10 11-20 21-30 31-40 41-50 50 next >