DODGE SPRINTER 2005 1.G Owners Manual

MAINTAINING YOUR VEHICLE 251
7
Chassis
(1) Retaining screws
(2) Clearance lamp, R5W - 12V 5W
(3) Turn signal lamp, P21W - 12V 21W
(4) Stop lamp, P21W - 12V 21W
(5) Taillamp, R5W - 12V 5W
(6) Backup lamp, P21W - 12V 21W
(7) License plate lamp (driver‘s side only), R5W - 12V 5W 1. Loosen retaining screw a and remove lamp
housing.
2. To change a bulb, press the bulb into the bulb socket, turn it counterclockwise and remove.
3. Insert the new bulb.
4. Install lamp housing.

252 MAINTAINING YOUR VEHICLELicense Plate Lamps
(Cargo/Passenger Vans Only)1. Press the bulb socket to the left, against the force of the spring, and remove.
2. Replace the bulb, C5W – 12V 5W.
3. Install the cover.
4. Re-install the bulb socket.
Additional Brake Lamp
(Cargo/Passenger Vans Only)(1) Retaining screws
1. Take out the retaining screws (1) and remove the lamp housing.
2. To change a bulb, P21W – 12V 21W Press the bulb into the bulb socket, turn it
counterclockwise and remove.
3. Insert the new bulb.
4. Install the lamp housing.

MAINTAINING YOUR VEHICLE 253
7
Side-Mounted Turn Signals1. Press the lamp housing to the front, against the force of the spring, and remove.
2. Replace the bulb, W5W - 12V 5W
3. Install the bulb socket.
Side-Marker Lamps,
Standing Lamps (Optional)Retaining screws (1) Bulb socket (2)
1. Take out the retaining screws (1) and remove the lamp housing.
2. Turn the bulb socket (2) counterclockwise and remove.
3. Replace the bulb, W3W – 12V 3W.
4. Install the bulb socket (2).

254 MAINTAINING YOUR VEHICLEIdentification Lamps (Cargo/passenger vans only)(1) Retaining screw
1. Take out the retaining screw (1) and remove the lamp housing.
2. To change a bulb, 12V 4CP Press the bulb into the bulb socket, turn it
counterclockwise and remove.
3. Insert the new bulb.
4. Install the lamp housing.
Interior Lighting in Passenger Compartment and
Load Compartment1. Align a screwdriver on the retaining spring, press it in and pry the lamp housing out.
2. Replace the bulb, K – 12V 18W
3. Install the lamp housing.

MAINTAINING YOUR VEHICLE 255
7
Interior Lighting with Reading Lamp1. Use a screwdriver on the catch spring to press in and remove the bulb housing.
2. Replace the bulb, K – 12V 10W.
3. Install the lamp housing.
Interior Lighting with Interior Sensor Protection1. Use a screwdriver on the catch spring, remove the bulb housing.
2. Turn the bulb holder with the bulb in the direction of the arrow and remove it.
3. Replace the bulb holder and bulb, K – 12V 6W
4. Install the lamp housing.

256 MAINTAINING YOUR VEHICLEExit Lamps (Optional)(1) Lamp housing
(2) Cable connector
(3) Bulb holder 1. Use a screwdriver on the catch spring to remove the
lamp housing (1).
2. Press the locating spring on the cable connector (2), hold it down, and remove the cable connector (2).
3. Turn the bulb holder (3) to the left and remove it.
4. Replace the bulb, W5W - 12V 5W.
5. Install the bulb holder (3) and attach the cable connector (2).

MAINTAINING YOUR VEHICLE 257
7
CAPACITIES
Engine with oil filter Engine oil Fuel tank Cooling system Windshield washer
system
Including
reserve fuel
All vehicles about 9.5 US qt
(9.0 l) about
26.4 US gal
(100 l) about
2.8 US gal
(10.5 l) about
2.7 US gal
(10.0 l) about
7.4 US qt
(7.0 l)

258 MAINTAINING YOUR VEHICLERecommended Fluids and LubricantsThe manufacturer recommends for your vehicle model
the use of DaimlerChrysler approved fluids and
lubricants, e.g. engine oil, gear oil, automatic
transmission fluid, brake fluid, power steering fluid,
coolant and anti-corrosion/anti-freeze fluid only.
WARNING!
Failure to use fluids and lubricants which meet
the standards and specifications described in this
booklet or failure to adhere to the specified re-
placement intervals may result in damage to safe-
ty-related systems of your vehicle, such as the
brake system, which could cause an accident and/
or serious injury to you and others.
Use only fluids and lubricants meeting the
standards and specifications and adhere to
specified replacement intervals.
CAUTION!
Failure to use fluids and lubricants which meet
the standards and specifications described in this
booklet or failure to adhere to the specified
replacement intervals may result in a significantly
shortened service life and/or damage to
components of your vehicle, the repair of which
will not be covered by Warranty.
Use only fluids and lubricants meeting the
standards and specifications and adhere to
specified replacement intervals.

MAINTAINING YOUR VEHICLE 259
7
The following oils have been determined to meet DaimlerChrysler requirements.aMB approved Engine Oil SAE MB Sheet
76 Pure Synthetic Motor Oil 5W-40 229.3
76 Royal Triton QLT 15W-40 228.3
Agip All Guard Motor Oil 15W-40 228.3
Agip Eurosport 5W-40 229.3
Agip Synthetic PC 5W-40 229.3
Akron Ultra Clear C1-4
1
15W-40 228.3
BP Vanellus C6 Global Plus 10W-40 228.3
Brad Penn Euro-Diesel LD 15W-40 228.3
Castrol Elixion
1
5W-30 228.5
Castrol Tection S
1
15W-40 228.3
Chevron Delo 400 Multigrade 15W-40 228.3
Diesel Special Benz M&A 15W-40 228.3
Dislub Premium 15W-40 228.3
Exxon XD-3 Extra
1
15W-40 228.3
FormulaShell Ultra 5W-40 229.3
FormulaShell Ultra AB 5W-30 229.5
Gonher Super Fleet MB-III 15W-40 228.3
Hydroclear Power-D Engine Oil 15W-40 228.3
IDO Premium 15W-40 15W-40 228.3
Kendall GT-1 Full Synthetic Motor Oil 5W-40 229.3
Long Life EF Diesel Engine Oil Multi-
grade 15W-40 228.3
Lubral Super Diesel MB-III 15W-40 228.3
Max Raloy Diesel 5W-30 228.5
MBMotorenöl000989600113 10W-40 228.5
Mexlub CF-4 MB-3P 15W-40 228.3
Mobil 1 0W-40 0W-40 229.5
Mobil Delvac 1 5W-40 228.5
Mobil Delvac 1300 Super
1
15W-40 228.3
Mobil SHC Formula MB 5W-30 229.5
MOPAR
®Part No. 04798231AD 15W-40 228.3
Motul 8100 E-Tech 0W-40 0W-40 229.3
Motul 8100 X-cess 5W-40 5W-40 229.3
Panolin Indy SV 5W-40 229.3
Pennzoil European Formula Ultra 5W-30 229.5
Pennzoil Synthetic European Formula 5W-40 229.3
Premium Synthetik Motorenöl 5W-30 229.5
QS Superfleet 15W-40 228.3
Quaker State European Formula Ultra 5W-30 229.5
Quaker State Full Synthetic European For-
mula 5W-40 229.3
Quaker State Super Series III
1
15W-40 228.3
Raloy Diesel Turbo MX 15W-40 228.3

260 MAINTAINING YOUR VEHICLE1. Engine oil also meets API classification CI-4. Other oils may meet requirements - see oil label to determine.Raloy Motor Diesel 15W-40 228.3
Repsol Turbo UHPD 10W-40 228.5
Roshfrans Voltro Diesel
1
15W-40 228.3
Shell Helix Ultra 5W-30 229.3
Shell Helix Ultra 5W-40 229.3
Shell Rimula X CH-4 15W-40 228.3
Shell Rimula X CH-4 20W-50 228.3
Shell Rotella T Multigrade
1
15W-40 228.3
Super Diesel Oil MB-3 15W-40 228.3
Supreme Duty Diesel Engine Oil Multi-
grade 15W-40 228.3
Unoil GX-7 5W-40 229.3
Ursa Premium TDX 10W-30 228.3
Ursa Premium TDX 15W-40 228.3
Valvoline SynPower MXL 0W-30 229.3