DODGE VIPER 2010 ZB II / 2.G Owners Manual

Miles111,000 114,000 117,000 120,000
(Kilometers) (185 000) (190 000) (195 000) (200 000)
Change the rear axle fluid. X
Change the brake and clutch fluid. X
Lubricate the front and rear suspension ball joints. X
‡ This maintenance is not required if previously replaced.
\b\b Although not required, the manufacturer recom-
mends reprogramming TPMS after rotating tires so sys-
tem can relearn tire pressure sensor location. Refer to
“Tire Pressure Monitor System (TPMS)” in “Starting and
Operating” for further information. Inspection and service should also be performed anytime
a malfunction is observed or suspected. Retain all
receipts.
8
M
A I
N T
E
N A
N CE
S
C
H E
D
U L
E
SMAINTENANCE SCHEDULES 277

MAINTENANCE SCHEDULE A
Miles6,000 12,000 18,000 24,000 30,000
(Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000)
[Months] [6] [12] [18] [24] [30]
Change engine oil and engine oil filter. XX X X X
Rotate the tires.\b\b X XXXX
Inspect and replace the engine air cleaner filter, if
necessary. X
Inspect the transmission fluid. XX
Inspect the brake linings. X
Change the rear axle fluid. X
Change the brake fluid. X
Lubricate the front and rear suspension ball joints. X
8
M
A I
N T
E
N A
N CE
S
C
H E
D
U L
E
S278 MAINTENANCE SCHEDULES

Miles36,000 42,000 48,000 54,000 60,000
(Kilometers) (60 000) (70 000) (80 000) (90 000) (100 000)
[Months] [36] [42] [48] [54] [60]
Change engine oil and engine oil filter. X X X X X
Rotate the tires.\b\b XXXX X
Inspect and replace the engine air cleaner filter, if necessary. X
Inspect and replace the PCV valve, if necessary. X
Flush and replace the engine coolant at 60 months, if not
done at 102,000 miles. X
Inspect and replace the auto tension drive belt, if necessary. X
Change the transmission fluid. X
Inspect the transmission fluid. XX
Inspect the brake linings. XX
Change the rear axle fluid. XX
Change the brake and clutch fluid. X
Change the brake fluid. X
Lubricate the front and rear suspension ball joints. X
8
M
A I
N T
E
N A
N CE
S
C
H E
D
U L
E
SMAINTENANCE SCHEDULES 279

Miles66,000 72,000 78,000 84,000 90,000
(Kilometers) (110 000) (120 000) (130 000) (140 000) (150 000)
[Months] [66] [72] [78] [84] [90]
Change engine oil and engine oil filter. XX X X X
Rotate the tires.\b\b XXXXX
Inspect and replace the engine air cleaner filter, if
necessary. X
Inspect and replace the PCV valve, if necessary. X
Inspect and replace the auto tension drive belt, if
necessary.‡ XX
Change the transmission fluid. X
Inspect the transmission fluid. X
Inspect the brake linings. XX
Change the rear axle fluid. XX
Change the brake and clutch fluid. X
Change the brake fluid. X
Lubricate the front and rear suspension ball
joints. X
8
M
A I
N T
E
N A
N CE
S
C
H E
D
U L
E
S280 MAINTENANCE SCHEDULES

Miles96,000 102,000 108,000 114,000 120,000
(Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000)
[Months] [96] [102] [108] [114] [120]
Change engine oil and engine oil filter. X X X X X
Rotate the tires.\b\b XXXXX
Inspect and replace the engine air cleaner filter, if
necessary. X
Inspect and replace the PCV valve, if necessary. X
Replace the spark plugs. X
Replace the ignition cables. X
Flush and replace the engine coolant, if not re-
placed at 60 months. X
Flush and replace the engine coolant, if not re-
placed at 102,000 miles. X
Inspect and replace the auto tension drive belt, if
necessary.‡ XXX
Inspect the transmission fluid. XX
Change the transmission fluid. X
8
M
A I
N T
E
N A
N CE
S
C
H E
D
U L
E
SMAINTENANCE SCHEDULES 281

Miles96,000 102,000 108,000 114,000 120,000
(Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000)
[Months] [96] [102] [108] [114] [120]
Inspect the brake linings. X
Change the rear axle fluid. X
Change the brake and clutch fluid. X
Lubricate the front and rear suspension ball
joints. X
‡ This maintenance is not required if previously replaced.
\b\b Although not required, the manufacturer recom-
mends reprogramming TPMS after rotating tires so sys-
tem can relearn tire pressure sensor location. Refer to
“Tire Pressure Monitor System (TPMS)” in “Starting and
Operating” for further information. Inspection and service should also be performed anytime
a malfunction is observed or suspected. Retain all
receipts.
8
M
A I
N T
E
N A
N CE
S
C
H E
D
U L
E
S282 MAINTENANCE SCHEDULES

WARNING!
•You can be badly injured working on or around a
motor vehicle. Do only service work for which you
have the knowledge and the right equipment. If
you have any doubt about your ability to perform
a service job, take your vehicle to a competent
mechanic.(Continued)
WARNING! (Continued)
•Failure to properly inspect and maintain your
vehicle could result in a component malfunction
and effect vehicle handling and performance. This
could cause an accident
8
MA I
N T
E
N A
N CE
S
C
H E
D
U L
E
SMAINTENANCE SCHEDULES 283

IF YOU NEED CONSUMER ASSISTANCE
CONTENTS
Suggestions For Obtaining Service For Your
Vehicle .............................. 287
▫ Prepare For The Appointment ........... 287
▫ Prepare A List ...................... 287
▫ Be Reasonable With Requests ............ 287
 If You Need Assistance ................. 287
▫ Chrysler Group LLC Customer Center ..... 288
▫ Chrysler Canada Inc. Customer Center ..... 288
▫ In Mexico Contact .................... 288 ▫
Customer Assistance For The Hearing Or
Speech Impaired (TDD/TTY) ............ 289
▫ Service Contract ..................... 289
 Warranty Information .................. 290
 MOPAR Parts....................... 290
 Reporting Safety Defects ................ 290
▫ In The 50 United States And
Washington, D.C. .................... 290
▫ In Canada ......................... 291
 Publication Order Forms ................ 291
9

Department Of Transportation Uniform Tire
Quality Grades ........................ 293
▫ Treadwear ......................... 293 ▫
Traction Grades ..................... 293
▫ Temperature Grades .................. 294
286 IF YOU NEED CONSUMER ASSISTANCE