FIAT BARCHETTA 2001 1.G Radio Tape Player And External CD Manual

20Cyan GialloMagenta Nero603.47.453
OPERATION
20
Scanning tape tracks (forward)
Press the SCN button [6] to play the first 10 sec-
onds of each track on the tape. The message
“SCAN” will appear on the display. Press theSCN
button [6] again to stop the scan.
Repeat track
Press the RPTbutton [8] to play the last track
again. The message “RPT”will appear on the dis-
play. To quit this mode, press the RPTbutton again
[8].
Dolby B noise reduction function
Press the Dolby B NR[15] to start the function.
The message“B NR”will appear on the display.
Press the button again to turn the function off.Skip blank tape function
This function will skip blank tape sections lasting
for longer than 12 seconds and automatically start
playing the next recorded section.
To turn the function on, press the BLSbutton
[13] until the message“BLS”appears on the dis-
play. Press the button again to turn the function off.
Note:
In some cases, the following functions may not
work correctly:
– next/last track search
– track scan
– repeat track
– skip blank tape.

21Cyan GialloMagenta Nero603.47.453
21
CD PLAYER
The sound system can be connected to a compati-
ble CD player (CD Changer).
Loading the CD magazine
Make sure that label A-fig. 3is the right way up,
otherwise the CD player will not work.
The magazine can hold up to six discs.
Fitting the disc magazine in the player
Open flap fig. 2. This can be caused by:
– low level recordings (weak sounds and not per-
fect recording)
– tapes containing conversations
– tapes with blank sections lasting less than 12 sec-
onds
– tapes with long periods of silence in the record-
ings
– tapes without blank sections (e.g. live record-
ings)
– tapes with a lot of noise in the blank sections

22Cyan GialloMagenta Nero603.47.453
OPERATION
22
Insert CD magazinefig. 4completely into the
player with the label (see arrows) facing upwards.
Close the flap after having inserted the CD loader,
to prevent dust or other small objects from getting
into the player.
P5S10011
fig. 2
P5S10012
fig. 4
P5S10015
fig. 3

23Cyan GialloMagenta Nero603.47.453
23
Pause
Press the play /pause button [14] to temporally in-
terrupt playback. Press it again to start playback.
Disc selection
Press the next disc button [4]: The discs will be se-
lected in the following order each time the button is
pressed: 1➞2 ➞3 ➞4 ➞5 ➞6 ➞1 …
Alternatively, press the last disc button [16]: to se-
lect discs in the following order: 1➞6 ➞5 ➞4 ➞
3 ➞2 ➞1…
Track selection
Press the left / right button [18].
H: Press this button twice to go to the beginning
of the next track.
G: Press this button twice to go to the beginning
of the track being played. Press this button again to
go the previous track. Removing the disc magazine from the player
Open flap fig. 2. Press eject button A-fig. 2on the
player. The magazine will be partially ejected.
Pull out the magazine carefully.
Close the sliding door.
Removing CD’s from the magazine
Pull out the CD’s one at a time, by pressing the
lever next to each CD.
Playback
Press the FUNCbutton [2] to select CD mode.
The system will start playing the first CD in the mag-
azine.

24Cyan GialloMagenta Nero603.47.453
24
Fast forward/fast backward
Keep the left/right button [18] pressed.
G: fast backward
H: fast forward
Hold the button pressed for longer than 1 second
to advance at a speed equal to 3 times normal speed.
Hold the button pressed for longer than 3 seconds
to advance at a speed equal to 30 times normal
speed.
Scan tracks on selected CD
Press the SCNbutton [6] to play the first 10 sec-
onds of each track on the selected CD. The message
“SCAN”will appear on the display. Press the SCN
button [6] again to stop the scan.The scan will start from the next track with re-
spect to the one being played.
Scan tracks on all CD’s
Press the SCNbutton [6] for more than 2 sec-
onds to play the first 10 seconds of all the discs in
the player. The messages “DISC”and “SCN”will
appear on the display. Press theSCNbutton [6]
again to stop the scan.
The scan will start from the next track with re-
spect to the one being played.
Repeat track
Press the RPTbutton [8] to play the track sever-
al times. The message “RPT”will appear on the dis-
play. Press theRPTbutton[8] again to end this
mode.
OPERATION

25Cyan GialloMagenta Nero603.47.453
25
“RDM”will appear on the display. To end this func-
tion, press the RDMbutton [11] again.
Select magazine
This function can only be used if the CD player can
house one than one magazine. The next magazine is
selected each time the MAGbutton is pressed [17]
OTHER FUNCTIONS
Sound muting during cellular phone use
(where fitted)
The message “TEL”will appear on the display to
indicate an incoming message and the sound system
will be muted. Muting ends and system returns to
normal operation as soon as the telephone is hung
up. Repeat CD
Hold the RPTbutton [8] pressed for more than 2
seconds to play the last CD several times. The mes-
sages “DISC”and “RPT”will appear on the dis-
play. Press the RPTbutton [8] again to end this
function..
Random tracks
Press the RDM button [11] pto play all the tracks
on the selected CD in random order. The message
“RDM”will appear on the display. Press the RDM
button [11] again to end this function.
Random tracks on all CD’s
Hold the RDMbutton [11] pressed for more than
2 seconds to play all the tracks on the CD’s in the
player in random order. The messages “DISC”and

26Cyan GialloMagenta Nero603.47.453
26
Problem
The sound
system cannot
be switched on
(or no sound
is produced)
The sound quality
has become poor
TROUBLESHOOTING
Solution
Replace the old fuse with a new fuse of the
same amperage
Clean the player head with a cleaning cas-
sette, etc. Cause
A fuse has blown
The player head is dirty

27Cyan GialloMagenta Nero603.47.453
27
Error displayProcedure
Error in the CD Changer mechanism (the disc cannot be changed, eject-
ed, etc.)
➞The CD Changer mechanism is probably damaged. Contact your local
dealer.
The pick-up is out of focus during playback due to scratches on the disc,
etc.
The CD contents cannot be read, probably because the disc has been in-
serted upside down.
The cassette is jammed during insertion or ejection.
➞Remove the cause jamming the cassette.
If you cannot solve the problem, turn the sound system off and contact aFiat Dealership.
This unit is equipped with a set of self-test functions to protect the system. The user will be informed of errors by means of the
following messages. Solve the problem as shown in the following procedures.

28Cyan GialloMagenta Nero603.47.453
28
Max. power: 4 x 30 W
Frequency response: 30 ÷ 20,000 Hz
Aerial
The vehicle is equipped with a manual telescopic
aerial on the rear right side.
Electrically-operated aerial
The sound system is wired for a fully automatic
electrically-control aerial (optional)
The switching voltage for the aerial is to be found
on contact 5 of the sound system (see figure).
Switching voltage: +12 V, max. current 0.5 A
Speakers
The sound system consists of the following two
separate way system:– 2 two cone speakers Ø 165 each with a power
of 60 W.
– 2 fluid iron tweeter speakers each with a power
of 60 W.
Fuses
The sound system has a protective fuse of 10A
fig. 5located behind the radio.
TECHNICAL
INFORMATION
P5S00929
fig. 5

29Cyan GialloMagenta Nero603.47.453
Print n. 603.47.453 - VI - 2001 - 2ndEdition - Printed by Satiz - Turin (Italy)
Coordinamento Editoriale Satiz - Torino