FIAT IDEA 2009 1.G Owners Manual

190
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
Maximum speed rating
Q= up to 160 km/h.
R= up to 170 km/h.
S= up to 180 km/h.
T= up to 190 km/h.
U= up to 200 km/h.
H= up to 210 km/h.
V= up to 240 km/h.
W= up to 270 km/h.
Y= up to 300 km/h.HOW TO READ THE
RIM DATA
Example: 6 J x 14 ET 40
6 = rim diameter in inches (1).
j) = rim drop centre outline (side
projection where the tyre bead
rests) (2).
14 = rim nominal diameter in inches
(corresponds to diameter of the
tyre to be mounted) (3 = Ø).
ET = shape and number of humps (used
for withholding tubeless tyre
beads on the rim).
40 = wheel camber angle (distance
between the disc/rim supporting
plane and the wheel rim centre li-
ne). Load rating (capacity)
60= 250 kg 84= 500 kg
61= 257 kg 85= 515 kg
62= 265 kg 86= 530 kg
63= 272 kg 87= 545 kg
64= 280 kg 88= 560 kg
65= 290 kg 89= 580 kg
66= 300 kg 90= 600 kg
67 = 307 kg 91= 615 kg
68= 315 kg 92= 630 kg
69 = 325 kg 93= 650 kg
70 = 335 kg 94= 670 kg
71 = 345 kg 95= 690 kg
72= 355 kg 96= 710 kg
73= 365 kg 97= 730 kg
74 = 375 kg 98= 750 kg
75= 387 kg 99= 775 kg
76 = 400 kg 100= 800 kg
77= 412 kg
101= 825 kg
78= 425 kg 102= 850 kg
79= 437 kg 103= 875 kg
80= 450 kg 104= 900 kg
81= 462 kg 105= 925 kg
82= 475 kg 106= 950 kg
83= 487 kg

191
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
1.2 - 1.4
petrol version -
1.3 Multijet 70 CV
1.3 Multijet 90 CV -
1.3 Multijet 95 CV -
1.6 Multijet
(*) Optional alloy rim
(**) Tyres to which chains cannot be fitted
(***) WARNING: the 14” wheel can only be used on 1.2 - 1.4 petrol and 1.3 Multijet 70 CV versions with chassis number higher than 74500
RIMS
6J x 14” ET 40
6J x 15” ET 40 (*)
6 J x 16” ET 41 (alloy)
6J x 15” ET 40 (*)
6
1/2J x 16” ET 40 (alloy)
TYRES
Equipment
185/65 R14 86T
195/60 R15 88H
205/50 R16 87V (**)
195/60 R15 88H
205/50 R16 87V (**)
Winter
185/65 R14 86Q (M+S)
195/60 R15 88Q (M+S)
–
195/60 R15 88Q (M+S)
–
SPACE SAVER SPARE WHEEL
Rim
4B x 14” (***)
4B x 15”
4B x 15”
Pneumatic
135/80 B14 84M (***)
125/80 R15 95M
125/80 R15 95M
VERSIONS
alternatively

192
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
COLD TYRE INFLATION PRESSURES (bar)
ORIGINAL TYRES
Tyre size Medium load Full load
Front Rear Front Rear
185/65 R14 86H 2,2 2,1 2,3 2,3
195/60 R15 88H 2.2 2.1 2.3 (2.4 ▲) 2.3
205/50 R16 87V 2.2 2.1 2.3 (2.5 ▲) 2-3
▲1.6 Multijet versions only
SPACE SAVER SPARE WHEEL135/80 B14 84M 2.8125/80 R15 95M 4.2
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.

193
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
DIMENSIONS
Dimensions are expressed in mm and re-
fer to the vehicle equipped with its origi-
nal tyres.
Height is measured with vehicle unladen.
Luggage compartment volume
Capacity with vehicle unladen
(V.D.A. standards): . . . . . . 315 dm
3
F0H0301m
AB C D E F) G I
3930 794 2508 628 1660 (●) 1434 1698 1424
(*) Minor variations in size are possible depending on the dimensions of the rims
(●) 1690 with roof bars
fig. 6
PERFORMANCE
Top permissible speed after initial car use in km/h.
1.216V1.48V (◊)1.416V1.3 Multijet 70 CV 1.3 Multijet 90 CV 1.3 Multijet 95 CV 1.6 Multijet
163 163 175 159 173 175 190
(◊) Engine version for some versions/markets only

194
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
WEIGHTS
Weights (kg)
Unladen weight (with all liquids, fuel tank filled to 90 % and without optional equipment):
Payload (*) including the driver:
Maximum permissible loads (**)
– front axle:
– rear axle:
– total:
Towable loads:
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on tow hitch(trailer with brakes):
(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will
decrease in relation to the maximum permitted loads.
(**) Loads not to be exceeded. The driver is responsible for arranging goods in the luggage compartment and/on load carrying platform within
the maximum permitted loads
(◊) Engine version for some versions/markets only1.2
16V
1155
500
940
805
1655
1000
400
75
601.4
8V(◊) - 1.416V
1155
500
940
805
1655
1000
400
75
601.3 Multijet
1200
500
940
805
1700
1000
400
75
601.6 Multijet
1275
500
1000
805
1775
1100
500
75
60

195
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
1.416V1.216Vkg
–
–
–
–
–
2,4
2,55
–
–
1,5
–
–kg
–
–
–
–
–
–
–
2,54
2,65
1,8
–
–litres
47
5 - 7
–
–
4,5
2,75
2,9
–
–
1,65
0,45
1,5 litres
47
5 - 7
–
–
4,5
2,5
2,7
–
–
1,65
0,45
1,5litres
–
–
47
5 - 7
6,0
–
–
2,85
3,0
1,98
0,45
1,51.6 Multijet1.48V (◊)
litres
47
5 - 7
–
–
4,5
2,4
2,6
–
–
1,65
0,45
1,5kg
–
–
–
–
–
2,1
2,25
–
–
1,5
–
–
kg
–
–
–
–
–
2,2
2,35
–
–
1,5
–
–litres
–
–
47
5 - 7
7,8
–
–
4,4
4,7
–
0,45
1,5kg
–
–
–
–
–
–
–
3,74
4,0
1,6
–
–1.3 MultijetRecommended fuels
Genuine products
Unleaded petrol with no less than 95
R.O.N. (EN 228 Specification)
Diesel for automotive engines
(Specification EN590)
50% mixture of demineralized water
and PARAFLU UP
(❒)
SELENIA K P.E.
SELENIA WR P.E.
TUTELA CAR
TECHNYX
TUTELA TOP 4
Mixture of water and TUTELA
PROFESSIONAL SC 35
CAPACITIES
Fuel tank: including a reserve of:
Fuel tank:
including a reserve of:
Engine cooling
system:
Engine sump:
Engine sump and filter:
Engine sump:
Engine sump and filter:
Gearbox/differential
casing:
Hydraulic brake circuit:
Windscreen/rear window
washer fluid reservoir:
(❒) When the vehicle is used under particularly harsh climate conditions, we recommend using a 60% mixture of PARAFLU UP and 40% of de-
mineralised water.
(◊) Engine version for some versions/markets only

196
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND SPECIFICATIONS
Use Fluid and lubricant specifications Fluids and lubricants Frequency
for correct car operation genuine replacement
Petrol engine
lubricants
Diesel engine
lubricants
For diesel engines, in the event of an emergency in which the original products are not available, lubricants with at least ACEA C2
performance are acceptable; however, in this case optimum engine performance is not guaranteed and the lubricant should be re-
placed as soon as possible at a Fiat Dealership.
The use of products with features lower than ACEA A3 and ACEA C2 could cause engine damage not covered by warranty.SELENIA K P.E.
Contractual Technical
Reference No. F603.C07
SELENIA K P.E.
Contractual Technical
Reference No. F510.D07
Synthetic base lubricants
SAE 5W-40 ACEA C3 grade.
Classification FIAT 9.55535-S2.
Synthetic base lubricants
SAE 5W30 grade FIAT 9.55535-M2 Classification.As shown on
Service Schedule
As shown on
Service
Schedule

197
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
Use
Motion transmission
lubricants and
grease
Brake fluids
Protective
agent for radiators
Additive for
diesel fuel
Windscreen/
rear window
washer fluid
(●)IMPORTANT Do not use fluids with different specifications for topping up or mixing.
(❒) When the vehicle is used under particularly harsh weather conditions, we recommend using a 60-40 mixture of PARAFLU UP and demine-
ralised water.Fluid and lubricant features
for correct car operation
All synthetic lubricant
SAE 75W-85 grade. Exceeding API GL-4 PLUS,
FIAT 9.55550 MIL-L- 2105 D LEV specifications.
ClassificationFIAT 9.55550-MX3
Transmission lubricant
“ATF DEXRON III”.
ClassificationFIAT 9.55550-AG2
Molybdenum disulphide grease for high temperatures.
NL.GI. 1-2 consistency
ClassificationFIAT 9.55580
Polyurea base synthetic grease for high temperatures.
NL.GI. 2-2 consistency
ClassificationFIAT 9.55580
Specific grease for low-friction coefficient
CV joints. NL.GI. 2- 2 consistency
ClassificationFIAT 9.55580
Synthetic fluid, F.M.V.S.S. n.116, DOT 4, ISO 4925,
SAE J-1704, CUNA NC 956-01
Classification FIAT 9.55597
Red protective with antifreeze action, based on inhibited
monoethylene glycol with organic formula based on O.A.T.
Passes CUNA NO 956-16, ASTM D 3306 specifications
Classification FIAT 9.55523
Additive for diesel fuel, protecting Diesel engines
Mixture of alcohol and surfactants CUNA NC 956-11
Classification FIAT 9.55522Genuine fluids and
lubricants
TUTELA CAR
TECHNYX
Contractual Technical
Reference
N° F010.B05
TUTELA CAR GI/E
Contractual Technical
Reference
N° F001.C94
TUTELA ALL STAR
Contractual Technical
Reference
N° F702.G07
TUTELA STAR 325
Contractual Technical
Reference
N° F301.D03
TUTELA STAR 700
Contractual Technical
Reference
N° F701.C07
TUTELA TOP 4
Contractual Technical
Reference
N° F001.A93
PARAFLU UP (●)
Contractual Technical
Reference
N° F101.M01
TUTELA DIESEL ART
Contractual Technical
Reference
N° F601.L06
TUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference N° F201.D02Applications
Manual gearbox and dif-
ferential
Hydraulic power stee-
ring
Wheel side
constant velocity joint
CV joints on differential
side subject to high tem-
peratures (versions1.4
16v)
CV joints
on differential side
Hydraulic
brakes and clutch
Cooling circuit. 50-50 con-
centration to -35°C (❒).
Do not mix with product
of different type.
To be mixed with fuel oil
(25 cc per 10 litres)
To be used diluted or
undiluted in wind-
screen/rear window
washer/wiper systems

198
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
FUEL CONSUMPTION
The fuel consumption figures given in the table below are determined on the basis of the homologation tests laid down by specific
European Directives.
The procedures below are followed for measuring consumption:
❒urban cycle: cold starting followed by driving that simulates urban use of the car;
❒extra urban cycle: driving simulating the use of the vehicle in a non-urban situation with frequent acceleration in all gears; the
speed varies between 0 and 120 km/h;
❒combined consumption: about 37% of the urban cycle and around 63% of the non-urban cycle.
IMPORTANT The type of route, traffic situations, weather conditions, driving style, general conditions of the car, trim level/
equipment/accessories, load, climate control system, roof rack, other situations that affect air drag may lead to different fuel con-
sumption levels than those measured.
According to European Directive in force (litres per 100 km) Urban Extra urban Combined
1.216V8.4 5.4 6.5
1.48V(◊) 7.9 5.1 6.1
1.416V (5 gears) 8.5 5.5 6.6
1.416V (6 gears) 8.5 4.8 6.2
1.3 Multijet 70CV 5.8 4.1 4.7
1.3 Multijet 90CV 5.8 3.9 4.6
1.3 Multijet 95CV 5,7 3,8 4,5
1.6 Multijet 6.0 4.0 4.7
(◊) Engine version for some versions/markets only

199
STARTING
AND DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
CO2EMISSIONS
The CO2emission figures in the table below refer to combined fuel consumption.
According to European Directive in force (g/km)
1.216V1.48V (◊)1.416V1.3 Multijet 70CV 1.3 Multijet 90CV 1.3 Multijet 95CV1.6 Multijet
5 gears 6 gears
154 145 157 146 125 120 118 124
(◊) Engine version for some versions/markets only