lock FORD F150 2005 11.G Quick Reference Guide

PREMIUM/AUDIOPHILE INDASH CD6/MP3
DISC AUDIO SYSTEM(If equipped)
12
3
4
5 8 910 11
6
7
6
EJECTING CDs(CD Eject)
Press to eject a CD. For Indash CD6/MP3
system (if equipped), press and hold to autoejectall CDs present in the system.
TUNERPress to manually move up or down the radio
frequency or to select a desired disc. Also use inmenu mode to select various settings.
MUTE MODEPress to mute the playing media. Press again
to return to the playing media.
MENUPress to toggle through the following modes:Treble, Bass, Balance, Fade, Speed Sensitive
Volume, Compression, Autoset, Setting the Clock.
SHUFFLEPress to play tracks on the current CD in
random order. Press to turn on/off
SEEK FUNCTIONIn radio mode, press to move to the next
strong station up or down the frequency band.In CD mode, press to move to the next/previoustrack on the current disc.
SCAN FUNCTIONIn radio mode, press to hear a brief sampling
of stations. In CD mode, press to hear a briefsampling of CD tracks on the current CD.
SETTING MEMORY PRESETSSelect frequency band with the AM/FM
button, then select a station. Press and hold anumbered button until the sound returns.
VOLUME/POWER CONTROL Push to turn the audio system on or off.
Turn the control to raise or lower volume.
AM/FM AND CD SELECTIn radio mode, press AM/FM to select AM
or FM frequency bands. Press CD to begin CD
play. In CD mode, press AM/FM to stop play and
begin radio play.
LOADING CDS – FOR INDASH
CD6/MP3 SYSTEM (if equipped)
Press the LOAD button and then a preset number
to select a slot. Press and hold LOAD to activateautoload, for loading up to 6 CDs.
1
2
3
4
5
6
7
8
9
10
11

ESSENTIAL INFORMATION
FUEL– Your vehicle is designed to use "Regular" unleaded gasoline with pump (R+M)/2 octane rating
of 87. Note: when the "Low Fuel Level" message appears in the message center display, you must push the RESET button on the full message center or the button on top of the cluster for the mini
message center to clear this warning message. Until fuel is added, this message will reappear at
10minute intervals.
TIRE PRESSURE– Your tire pressure is properly set at the dealership to the recommended
specifications found on the Tire Label or Certification Label located inside on the edge of the driver's door
pillar. Please check your tire pressure during routine maintenance and seasonal changes.
FUSES–If electrical components in the vehicle are not working, a fuse may have blown. For moreinformation about changing a fuse, refer to your Owner's Guide.
FUEL PUMP SHUTOFF SWITCH– After a collision, if the engine cranks but does not start, the fuel
pump shutoff switch may have to be reset. The switch is located in the front passenger's footwell,
behind the kick panel access cover, in front of the fuse box. For complete details on resetting the switch,
refer to your Owner's Guide.
CHANGING THE TIRES– For more information on changing the tires, refer to your Owner’s Guide.
LOCATION OF THE SPARE TIRE AND TOOLS
ITEM LOCATION
Spare Tire Under the vehicle, just forward of the rear bumper.
Jack, Jack Handle,
Wheel Nut Wrench
ROADSIDE EMERGENCIES– To fully assist you if you should have a vehicle concern, Ford
offers a complimentary Roadside Assistance Program. This program is separate from the New
Vehicle Limited Warranty. The service is available 24 hours a day, seven days a week for the New
Vehicle Limited Warranty period (U.S.) or Basic Warranty period (Canada) of three years or 36,000
miles (60,000 km). Roadside Assistance will cover: Changing a flat tire, jumpstarts, limited fuel
delivery, lockout assistance, and towing of your vehicle.
Roadside Assistance Centers: UNITED STATES (800) 2413673 |CANADA (800) 6652006
For complete details on any roadside assistance concern, see the Roadside Emergencies section or the Customer Assistance section in your Owner’s Guide.
REGULAR CAB:Behind the interior trim on the rear
passenger side of the vehicle.
SUPERCAB andSUPERCREW:Under the rear seat
on the passenger side of the vehicle.

HEADLAMP AND PANEL DIMMER CONTROLRotate the control clockwise one position from off to turn on the parking lamps.
Rotate two positions from off to also turn on the headlamps. Rotate counterclockwisefrom off to activate autolamp (if equipped), which provides lightsensitive automaticon/off control of the exterior lights and keeps them on for a short period of time afterthe ignition is turned off. When the control is in any position except high beams or off, pull the controltoward you to activate the foglamps (if equipped).
Use the panel dimmer control, located to the right of the headlamp control, to adjust the brightness of
the instrument panel during the headlamps and parking lamps operation. Rotate to the full up position,past the detent, to turn on the interior lamps. Rotate to the full down position, past the detent, toprevent the interior lights from illuminating when doors are opened.
POWER ADJUSTABLE PEDALS(if equipped)
Press and hold the top end of rocker control to adjust the accelerator and brake
pedal away from you. Hold the lower end of the control to move the pedals towardyou. Adjust the pedals only when the vehicle is stopped and the gearshift lever is in
the P (Park) position.
If equipped with memory function, the adjustable pedals, along with the driver's seat, can be
automaticallypositioned in two programmable positions using the control located on the driver's seat.
Refer to your Owner's Guide for instructions on how to use this memory feature.
SERVICE ENGINE SOON LAMPIlluminates briefly when the ignition is turned to the ON position to ensure the
system is functional. If the light comes on after the engine is started, refer to yourOwner's Guide. This lamp will illuminate if the fuel cap is not fully secured. In addition,
"Check fuel cap" will appear in the message center display. Make sure that the fuel capis secure by turning it clockwise 1/4 of a turn until it stops.
ABS WARNING LAMPIlluminates briefly when the ignition is turned to the ON position. If the light
comes on after the engine is started, refer to your Owner's Guide.
SPEED CONTROL(if equipped)
To set the speed control, press the ON button and release. Accelerate to the
desired speed and press the SET button and release. Once the system is engaged, an
icon will appear in the instrument cluster. To increase speed, tap the SET button and thespeed will increase in small increments each time, or use the accelerator pedal to reach
desired speed and then press SET. To reduce speed, press and hold CST until desired speed is reached.
Release or tap the CST button and speed will decrease in small increments. Also, you can depress the
brake pedal until desired speed is reached and press SET. Press RES/RESUME to return the vehicle to apreviously set speed if the vehicle is traveling more than 30 mph (48 km/h).
FOR REDUNDANT STEERING WHEEL CONTROLS(if equipped). To set the speed control,
press the right side of the ON/OFF switch. Accelerate to the desired speed and press the right side of the
CST/SET button and release. Once the system is engaged, an icon will appear in the instrument cluster.T
1
2
3
4
5

To increase speed, tap the SET button and the speed will increase in small increments each time, or use
the accelerator pedal to reach desired speed and then press SET. To reduce speed, press the left side of
the CST/SET button until desired speed is reached. R
elease or tap the left side of the CST/SET button
and speed will decrease in small increments.Also, you can depress the brake pedal until desired speed
is reached and press SET. Press RES/RESUME to return the vehicle to a previously set speed if the
vehicle is traveling more than 30 mph (48 km/h).
MESSAGE CENTER(if equipped)
With the ignition on, the message center displays important vehicle
information through a constant monitor of vehicle systems. The system will notify you of potential vehicle problems by displaying
warnings, followed by a long indicator chime. You may select the INFO or SETUP buttons on the message
center to display trip odometer, odometer, compass, distance to empty, average fuel economy, and tripelapsed drive time. The RESET button may be used to reset selected functions in the INFO and SETUP
menus. For more information about message center functions, please refer to your Owner's Guide.
FOURWHEEL DRIVE CONTROL(if equipped)
2H (2WD HIGH) delivers power to the rear wheels only and is the optimal
position for smoothness and fuel economy. 4H (4x4 HIGH) provides mechanically
locked fourwheel drive power to all four wheels. 4L (4x4 LOW) provides mechanically
locked fourwheel drive when extra power at reduced speeds is required. With eitheran electronic shift 4WD system or manual 4WD system, to shift from 2H to 4H move the control at any
forward speed up to 55 mph (88 km/h). To shift to or from 4L, bring the vehicle to a stop and keep thebrake pedal depressed. Next, place the gearshift in N (Neutral), and then move the control to or from 4L.
Some mechanical noise may be heard when the system engages. This is normal and no service isrequired. Note: The manual 4WD system has an N (Neutral) position in the transfer case. This settingoverrides the transmission and puts the vehicle in Neutral regardless of gearshift position. This settingshould only be used when towing the vehicle.
INDASH CD6/MP3 DISC AUDIO SYSTEM(if equipped)
Please see reverse side for more details.
PASSENGER AIRBAG DEACTIVATED LAMP(if equipped) Please refer to
the Seating and Safety Restraints section of your Owner's Guide for informationon
the PassengerAirbag Deactivated Lamp.
AUXILIARY POWER POINT (12V)An auxiliary power point is located on the instrument panel. For SuperCab and
SuperCrew vehicles, there is an additional auxiliary power point located on the lower
rear side of the center console that is accessible from the rear seats. Do NOT plug
optional electrical accessories into the cigarette lighter.
6
7
8
9
10

REMOTE ENTRY SYSTEM(if equipped)Press this control once to lock all doors. Pressing the control a second time will chirp
the horn to confirm that all doors are closed and locked, and the parklamps will flash once.
Press this control once to unlock the driver's door and twice to unlock all doors.
Press this control to sound the panic alarm. To silence, press the control again, or
turn the ignition on.
The remote entry system can also control the memory feature (if equipped). Please refer
to your Owner's Guide for instructions on how to activate this feature.
KEYLESS ENTRY SYSTEM(if equipped)
With this control you can lock or unlock all doors without using a key. First, enter your
fivedigit program code and then press the corresponding quick key:
Unlock all doors = 3 • 4Lock all doors = 7 • 8 and 9 • 0 simultaneously
DRIVER / PASSENGER BELTMINDER The BeltMinder feature is a supplemental warning to the safety belt warning function.
This feature provides additional reminders by intermittently sounding a chime and
illuminating the safety belt warninglamp in the instrument cluster when the driver's
and front passenger's safety belt is unbuckled. Both the driver's and front passenger's
safety belt usages are monitored and either may activate the BeltMinder feature.
REVERSE SENSING SYSTEM(RSS) (if equipped)
This sonar system sounds a tone to warn the driver of obstacles near the rear bumperwhen the reverse gear is selected. Obstacles can be detected within approximately 6 feet (2 m) behind the rear bumper while the vehicle moves in reverse at speeds lessthan 3 mph (5 km/h). The reverse sensing system defaults to on, but can be disabledby turning the ignition on, placing the gearshift in (R) reverse and pressing the RSS control.
An indicator light on the control, located next to the cigarette lighter, will illuminate when the system is turned off.
TOWING INFORMATIONFor more details on towing with your vehicle, please refer to your Owner's Guide or request a copy
of the Ford Motor Company 2005 MY RV and Trailer Towing Guidefrom your dealer.
DOOR CONTROLS
ADDITIONAL FEATURES
1
3
21
2
3