FORD MUSTANG 2003 Workshop Manual

31. Using the special tools, remove the front pump seal.
32.
NOTE: These bolts have been coated with sealant. High break torque may be required to
remove the bolts.
Remove the bolts.
33. Using the special tools, remove the front pump support.
34. Remove and discard the pump gasket. Klj . 11 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

35. Remove the intermediate anti-
rattle clip, if equipped.
36. CAUTION: Remove the assembly carefully to prevent damage to the overdrive band
friction material by the reverse clutch drive lugs.
Remove the following components as an assembly:
zIntermediate clutch pack.
z Intermediate one- way clutch.
z Reverse clutch.
z Forward clutch assembly.
37. Disengage and remove the overdrive band.
38. Remove the forward clutch hub and the No. 3 forward clutch hub front bearing. Klj . 12 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

39. Remove the intermediate stub shaft.
40. Align the reverse sun shell with the overdrive band anchor pin for removal.
41. Remove the following components as an assembly:
zForward clutch sun gear.
z No. 5 forward clutch sun gear bearing.
z Reverse clutch sun gear.
z No. 4 forward clutch hub bearing. Klj . 13 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

42. Remove the center support retaining ring and note location for assembly.
43. Remove the case to planet support spring.
44. Remove the planetary gear support and planetary as an assembly.
45. Remove the reverse clutch band.
46. Remove the retaining ring. Klj . 14 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

47. Remove the direct clutch pack.
48. Remove the No. 8 bearing.
49. Remove the output shaft, output shaft ring gear assembly and direct clutch.
50. Remove the No. 9 case rear bearing. Klj . 15 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

51. Inspect and if necessary, use the special tools to remove the rear case bushing. Klj . 16 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Main Control Valve Body
Disassembly
Main Control Valve Body —
Disassembled View
SECTION 307-
01: Automatic Transaxle/Transmission 2003 Mustang Workshop Manual Item Part
Number Description
1 — Valve plug retainer (part of 7A100)
2 — Main pressure booster valve sleeve (part of
7A100)
3 — Main pressure booster valve (part of 7A100)
4 — Main pressure regulator valve spring (part of
7A100)
5 — Main regulator valve (part of 7A100) Klj . 1 ba
82003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

6 7A100 Main control valve body assembly
7 7E195 Check ball (8 req'd)
8 7H171 Converter drain back valve
9 — Pressure regulator valve (part of 7A100)
10 — Pressure regulator valve spring (part of 7A100)
11 — Regulator boost plunger (part of 7A100)
12 — Regulator boost sleeve (part of 7A100)
13 — Valve retainer (part of 7A100)
14 — Capacity modulator valve (part of 7A100)
15 — Capacity modulator valve spring (part of 7A100)
16 — Spring retaining plate (part of 7A100)
17 — Capacity modulator valve (part of 7A100)
18 — Capacity modulator valve spring (part of 7A100)
19 — Spring retaining plate (part of 7A100)
20 — 3-
4 shift valve (part of 7A100) 21 — 3-
4 shift valve spring (part of 7A100) 22 — Valve retainer plug (part of 7A100)
23 — Valve plug retainer (part of 7A100)
24 — 2-
3 backout valve (part of 7A100) 25 — 2-
3 backout valve spring (part of 7A100) 26 — Spring retaining plate (part of 7A100)
27 — Spring retaining plate (part of 7A100)
28 — Pressure regulator valve spring (part of 7A100)
29 — Pressure regulator valve (part of 7A100)
30 — Control manual valve (part of 7A100)
31 — Retaining ring (part of 7A100)
32 — Solenoid screen
33 — 1-
2 shift valve (part of 7A100) 34 — 2-
3 shift valve spring (part of 7A100) 35 — 2-
3 valve (part of 7A100) 36 — Valve retaining plug (part of 7A100)
37 — Valve plug retainer (part of 7A100)
38 — Spring retaining plate (part of 7A100)
39 — Pressure regulator valve spring (part of 7A100)
40 — Pressure regulator valve (part of 7A100)
41 — Bypass clutch control valve (part of 7A100)
42 — Bypass clutch control valve spring (part of
7A100)
43 — Bypass clutch control valve plunger (part of
7A100)
44 — Bypass clutch control plunger sleeve (part of
7A100) Klj . 2 ba
82003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

1. Remove the torque converter clutch (TCC) solenoid and the shift solenoid.
1. Remove the bolt.
2. Remove the shift solenoid.
3. Remove the TCC solenoid.
2. Remove the two reinforcement plates. 1. Remove the bolts.
2. Remove the plates.
3. Remove the separator plate and discard the gaskets.
4. NOTE: Note the location of the eight coasting booster valve shuttle balls for assembly. Remove the eight coasting booster valve shuttle balls. 45 — Control valve plate (part of 7A100) Klj . 3 ba
82003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

5. Remove the converter drain back valve and solenoid pressure supply screen.
6. Remove the main control valve body cover plate.
1. Remove the 13 bolts.
2. Remove the valve body cover plate and gasket. Klj . 4 ba
82003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...