FORD MUSTANG 2003 Workshop Manual

REMOVAL AND INSTALLATION
Brake Caliper —
Cobra
Removal 1. Raise and support the vehicle. For additional information, refer to Section 100 - 02 .
2. Remove the tire and wheel assembly. For additional information, refer to Section 204 - 04 .
3. Remove the caliper locating pin E- clip.
4. Remove the caliper locating pin.
5. Remove the front brake flow bolt. 6. Remove the caliper. SECTION 206-
03: Front Disc Brake 2003 Mustang Workshop Manual Klj . 1 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

7. Remove the brake pads.
Installation 1. NOTE: Use new copper washers on front brake flow bolt.
Follow the removal procedure in reverse order. zBleed the caliper. For additional information, refer to Section 206 - 00 . Klj . 2 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Klj . 3 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Brake Caliper Anchor Plate —
Cobra
Removal 1. Remove the pads. For additional information, refer to Brake Pads — Cobra in this section.
2. Remove the anchor plate bolts.
Installation 1. Follow the removal procedure in reverse order.
SECTION 206-
03: Front Disc Brake 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Klj . 2 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Brake Caliper Anchor Plate
Removal
1. Remove the pads. For additional information, refer to Pads in this section.
2. Remove the anchor plate (2B292). 1. Remove and discard the anchor plate bolts.
2. Remove the anchor plate.
Installation 1. CAUTION: Use correct type and length bolts.
Follow the removal procedure in reverse order. zInstall new anchor plate bolts.
SECTION 206-
03: Front Disc Brake 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Klj . 2 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Disc
Removal
1. Remove the front disc brake caliper anchor plate (2B292). For additional information, refer to Brake Caliper Anchor Plate in this section.
2. Match mark the hub (1104) and the brake disc (1125).
3. If necessary, remove and discard the keeper nuts.
4. NOTE: If the brake disc cannot be easily removed, apply Rust Penetrant and Inhibitor F2AZ-
19A501- A or equivalent meeting Ford specification ESR-M99C56- A to the mating surfaces.
Remove the brake disc from the hub.
Installation 1. Clean rust and foreign material from the mating surfaces of the hub and brake disc. zUse Metal Brake Parts Cleaner F3AZ-19579- SA or equivalent to clean the brake disc
and hub.
2. Apply High Temperature Nickel Anti- Seize Lubricant F6AZ-9L494-AA or equivalent meeting Ford specification ESE - M12A4 - A to the hub flange. SECTION 206-
03: Front Disc Brake 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

3. Align the match marks and install the brake disc.
4. Install the anchor plate (2B292). For additional information, refer to
Brake Caliper Anchor Plate in this section.
5. Check the total indicated runout (TIR). For additional information, refer to Section 206 - 00 . Klj . 2 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Shield
Removal
1. Remove the brake disc (1125). For additional information, refer to Disc in this section.
2. Remove the brake disc shield (2K004). 1. Drill out three brake disc shield rivets.
2. Remove the brake disc shield.
Installation 1. Install the brake disc shield. 1. Position the shield.
2. Secure with three rivets.
2. Install the brake disc. For additional information, refer to Disc in this section.
SECTION 206-
03: Front Disc Brake 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...