brake GENESIS GV60 2023 Owners Manual
Page 409 of 690
6-75
06
Maintenance When Towing a
Trailer
Your vehicle will need service more
often when you regularly pull a trailer.
Important items to pay particular
attention to include reduction gear fluid,
axle lubricant and cooling system fluid.
Brake condition is another important
item to frequently check. If you’re
trailering, it’s a good idea to review these
items before you start your trip. Don’t
forget to also maintain your trailer and
hitch. Follow the maintenance schedule
that accompanied your trailer and check
it periodically. Preferably, conduct the
check at the start of each day’s driving.
Most importantly, all hitch nuts and bolts
should be tight.
NOTICE
To prevent vehicle damage:
[ Due to higher load during trailer
usage, overheating might occur on
hot days or during uphill driving.
[ When towing check reduction gear
fluid more frequently.
Page 412 of 690
6-78
Driving Your Vehicle
Vehicle capacity weight
1. 4 persons : 882 lbs. (400 kg)
2. 5 persons : 903 lbs. (410 kg)
3. 7 persons : 1126 lbs. (511 kg)
Vehicle capacity weight is the maximum
combined weight of occupants and
cargo. If your vehicle is equipped with a
trailer, the combined weight includes the
tongue load.
Seating capacity
1. Total : 4 persons (Front seat : 2
persons, Rear seat : 2 persons)
2. Total : 5 persons (Front seat : 2
persons, Rear seat : 3 persons)
3. Total : 7 persons (Front seat : 2
persons, Rear seat : 5 persons)
Seating capacity is the maximum
number of occupants including a driver,
your vehicle may carry. However, the
seating capacity may be reduced based
upon the weight of all of the occupants,
and the weight of the cargo being carried
or towed. Do not overload the vehicle as
there is a limit to the total weight, or load
limit including occupants and cargo, the
vehicle can carry.
Towing capacity
With trailer brakes: 6000 lbs (2722 kg)
Towing capacity is the maximum trailer
weight including its cargo weight, your
vehicle can tow.
Cargo capacity
The cargo capacity of your vehicle will
increase or decrease depending on the
weight and the number of occupants
and the tongue load, if your vehicle is
equipped with a trailer.
Steps for determining correct load
limit
1. Locate the statement "The combined
weight of occupants and cargo should
never exceed XXX lbs. or XXX kg" on
your vehicle's placard.
2. Determine the combined weight of
the driver and passengers that will be
riding in your vehicle.
3. Subtract the combined weight of the
driver and passengers from XXX lbs.
or XXX kg.
4. The resulting figure equals the
available amount of cargo and
luggage load capacity. For example,
if the "XXX" amount equals 1400
lbs. and there will be five 150 lb
passengers in your vehicle, the
amount of available cargo and
luggage load capacity is 650 lbs.
(1400 - 750 (5 x 150) = 650 lbs.)
5. Determine the combined weight of
luggage and cargo being loaded on
the vehicle. That weight may not
safely exceed the available cargo and
luggage load capacity calculated in
Step 4.
6. If your vehicle will be towing a
trailer, load from your trailer will be
transferred to your vehicle. Consult
this manual to determine how this
reduces the available cargo and
luggage load capacity of your vehicle.
WARNING
Do not overload the vehicle as there
is a limit to the total weight, or load
limit, including occupants and cargo,
the vehicle can carry. Overloading can
shorten the life of the vehicle. If the
GVWR or the GAWR is exceeded, parts
on the vehicle can be broken, and it can
change the handling of your vehicle.
These could cause you to lose control
and result in an accident.
Page 422 of 690
7-8
Driver Assistance System
CAUTION
[ The setting of the Warning Timing
D Q G : D U Q L Q J 9 R O X P H D S S O L H V W R
all functions of Forward Collision-
$ Y R L G D Q F H $ V V L V W
[ ( Y H Q W K R X J K S 6 W D Q G D U GT L V V H O H F W H G
I R U : D U Q L Q J 7 L P L Q J L I W K H I U R Q W
Y H K L F O H V X G G H Q O \ V W R S V W K H Z D U Q L Q J
P D \ V H H P O D W H
[ 6 H O H F W S / D W HT I R U : D U Q L Q J 7 L P L Q J
Z K H Q W U D I I L F L V O L J K W D Q G Z K H Q G U L Y L Q J
V S H H G L V V O R Z
Information
If the vehicle is restarted, Warning Timing
and Warning Volume will maintain the
last setting.
) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H
Assist Operation
Warning and control
The basic function for Forward Collision-
Avoidance Assist is to warn and help
control the vehicle depending on the
collision risk level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’.
OJWEV071001L
Collision Warning
[ To warn the driver of a collision, the
‘Collision Warning’ warning message
will appear on the cluster, an audible
warning will sound and the steering
wheel will vibrate.
[ If a vehicle is detected in front,
the function will operate when
your vehicle speed is between
approximately 6-124 mph (10-200
km/h).
[ If a pedestrian or cyclist is detected
in front, the function will operate
when your vehicle speed is between
approximately 6-53 mph (10-85 km/h).
[ If ‘Active Assist’ is selected, braking
may be assisted.
Page 423 of 690
7-9
07
OJWEV071002L
( P H U J H Q F \ % U D N L Q J
[ To warn the driver that emergency
braking will be assisted, the
‘Emergency Braking’ warning
message will appear on the cluster,
an audible warning will sound and the
steering wheel will vibrate.
[ If a vehicle is detected in front,
the function will operate when
your vehicle speed is between
approximately 6-53 mph (10-85 km/h).
[ If Forward Collision-Avoidance Assist
judges that avoiding a collision is
difficult even by changing the driving
lane, the function will operate when
your vehicle speed is between
approximately 6-62 mph (10-100
km/h) (if equipped with front corner
radar).
The function operation range may
decrease due to the front traffic
condition or the surroundings of the
vehicle.
[ If a pedestrian or cyclist is detected
in front, the function will operate
when your vehicle speed is between
approximately 6-40 mph (10-65
km/h).
[ In emergency braking situation,
braking is assisted with strong braking
power by the function to help prevent
collision with the vehicle, pedestrian
or cyclist ahead.
OJWEV071003L
6 W R S S L Q J Y H K L F O H D Q G H Q G L Q J E U D N H F R Q W U R O
[ When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
[ Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
Page 424 of 690
7-10
Driver Assistance System
Junction Turning function
Warning and control
Junction Turning function will warn and
control the vehicle depending on the
collision risk level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’.
OJWEV071009L
Collision Warning
[ To warn the driver of a collision, the
‘Collision Warning’ warning message
will appear on the cluster, an audible
warning will sound and the steering
wheel will vibrate.
[ The function will operate when
your vehicle speed is between
approximately 6-19 mph (10-30 km/h)
and the oncoming vehicle speed is
between approximately 19-44 mph
(30-70 km/h).
[ If ‘Active Assist’ is selected, braking
may be assisted.
OJWEV071239L
( P H U J H Q F \ % U D N L Q J
[ To warn the driver that emergency
braking will be assisted, the
‘Emergency Braking’ warning
message will appear on the cluster,
an audible warning will sound and the
steering wheel will vibrate.
[ The function will operate when
your vehicle speed is between
approximately 6-19 mph (10-30 km/h)
and the oncoming vehicle speed is
between approximately 19-44 mph
(30-70 km/h).
[ In emergency braking situation,
braking is assisted with strong braking
power by the function to help prevent
collision with the oncoming vehicle.
Information
If the driver's seat is on the left side,
Junction Turning function will operate
only when you turn left. If the driver's seat
position is on the right side, the function
will operate only when you turn right.
Page 425 of 690
7-11
07
OJWEV071003L
6 W R S S L Q J Y H K L F O H D Q G H Q G L Q J E U D N H F R Q W U R O
[ When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
[ Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
Junction Crossing function (if
equipped)
Warning and control
Junction Crossing function will warn
and control the vehicle depending on
collision risk level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’
OJWEV071004LOJWEV071005L
Collision Warning
[ To warn the driver of a collision, the
‘Collision Warning’ warning message
will appear on the cluster, an audible
warning will sound and the steering
wheel will vibrate.
[ The function will operate when
your vehicle speed is between
approximately 6-19 mph (10-30 km/h)
and the detected crossing vehicle
speed is between approximately 6-37
mph (10-60 km/h).
[ If ‘Active Assist’ and 'Forward Cross-
Traffic Safety' are selected, braking
may be assisted.
Page 426 of 690
7-12
Driver Assistance System
OJWEV071007LOJWEV071006L
( P H U J H Q F \ % U D N L Q J
[ To warn the driver that emergency
braking will be assisted, the
‘Emergency Braking’ warning
message will appear on the cluster,
an audible warning will sound and the
steering wheel will vibrate.
[ The function will operate when
your vehicle speed is between
approximately 6-19 mph (10-30 km/h)
and the detected crossing vehicle
speed is between approximately 6-12
mph (10-20 km/h).
[ In emergency braking situation,
braking is assisted with strong braking
power by the function to help prevent
collision with the crossing vehicle.
OJWEV071003L
6 W R S S L Q J Y H K L F O H D Q G H Q G L Q J E U D N H F R Q W U R O
[ When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
[ Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
CAUTION
If the collision angle with the crossing
Y H K L F O H L V E H \ R Q G D F H U W D L Q U D Q J H
Junction Crossing function warning and
F R Q W U R O P D \ E H O D W H R U P D \ Q R W R S H U D W H
Page 448 of 690
7-34
Driver Assistance System
OJWEV071072
When you are driving forward out of a
parking space, if Blind-Spot Collision-
Avoidance Assist judges that there is
a collision risk with an approaching
vehicle in the blind spot, it can help avoid
collision by applying the brake.
Detecting sensor
OJWEV051058N
OJWEV071073N[1] : Front view camera,
[2] : Rear corner radar
Refer to the picture above for the
detailed location of the detecting
sensors.
Page 453 of 690
7-39
07
: $ 5 1 , 1 *
[ & R O O L V L R Q D Y R L G D Q F H D V V L V W Z L O O
E H F D Q F H O O H G X Q G H U W K H I R O O R Z L Q J
circumstances:
- < R X U Y H K L F O H H Q W H U V W K H Q H [ W O D Q H
E \ D F H U W D L Q G L V W D Q F H
- < R X U Y H K L F O H L V D Z D \ I U R P W K H
collision risk
- 7 K H V W H H U L Q J Z K H H O L V V K D U S O \
steered
- 7 K H E U D N H S H G D O L V G H S U H V V H G
- ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H $ V V L V W
is operating
[ $ I W H U % O L Q G 6 S R W & R O O L V L R Q $ Y R L G D Q F H
$ V V L V W R S H U D W L R Q R U O D Q H F K D Q J H
\ R X P X V W G U L Y H W R W K H F H Q W H U R I W K H
O D Q H % O L Q G 6 S R W & R O O L V L R Q $ Y R L G D Q F H
$ V V L V W Z L O O Q R W R S H U D W H L I W K H Y H K L F O H L V
Q R W G U L Y H Q L Q W K H F H Q W H U R I W K H O D Q H
OJWEV071146L
Collision-avoidance assist (while
departing)
[ To warn the driver of a collision, the
warning light on the outside rearview
mirror will blink and a warning
message will appear on the cluster. At
the same time, an audible warning will
sound, warning light on the head-up
display (if equipped) will blink and the
steering wheel will vibrate. [ Blind-Spot Collision-Avoidance Assist
will operate when your vehicle speed
is below 2 mph (3 km/h) and the
speed of the vehicle in the blind spot
area is above 3 mph (5 km/h).
[ Emergency braking will be assisted to
help prevent collision with the vehicle
in the blind spot area.
OJWEV071003L
[ When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
[ Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
Page 478 of 690
7-64
Driver Assistance System
' U L Y H U $ W W H Q W L R Q : D U Q L Q J
Operation
Basic function
Display and warning
The basic function of Driver Attention
Warning is to warn the driver ‘Consider
taking a break’.
OTM070105L
7 D N L Q J D E U H D N
[ The ‘Consider taking a break’ message
will appear on the cluster and an
audible warning will sound to suggest
that the driver take a break, when the
driver’s attention level is below 1.
[ Driver Attention Warning will not
suggest a break when the total driving
time is shorter than 10 minutes or 10
minutes has not passed after the last
break was suggested.
[ The 'Taking a brake' will operate
when your vehicle speed is between
approximately 6~130 mph (0~210
km/h).
: $ 5 1 , 1 *
) R U \ R X U V D I H W \ F K D Q J H W K H 6 H W W L Q J V
D I W H U S D U N L Q J W K H Y H K L F O H D W D V D I H
O R F D W L R Q
CAUTION
[ ' U L Y H U $ W W H Q W L R Q : D U Q L Q J P D \
V X J J H V W D E U H D N G H S H Q G L Q J R Q W K H
G U L Y H UT V G U L Y L Q J S D W W H U Q R U K D E L W V
H Y H Q L I W K H G U L Y H U G R H V QT W I H H O I D W L J X H
[ ' U L Y H U $ W W H Q W L R Q : D U Q L Q J L V D
V X S S O H P H Q W D O I X Q F W L R Q D Q G P D \ Q R W
E H D E O H W R G H W H U P L Q H Z K H W K H U W K H
G U L Y H U L V L Q D W W H Q W L Y H
[ 7 K H G U L Y H U Z K R I H H O V I D W L J X H G V K R X O G
W D N H D E U H D N D W D V D I H O R F D W L R Q H Y H Q
W K R X J K W K H U H L V Q R E U H D N V X J J H V W L R Q
E \ ' U L Y H U $ W W H Q W L R Q : D U Q L Q J
Information
[ For more details on setting the
functions in the infotainment system
Vehicle Settings, refer to “Vehicle
Settings” section in chapter 4.
[ Driver Attention Warning resets in the
following situations:
-The vehicle is turned off
-The driver unfastens the seat belt
and opens the driver’s door
-The vehicle is stopped for more than
10 minutes