ABS GREAT WALL FLORID 2008 Workshop Manual
Page 263 of 281
Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual256
Front Bumper
Components
1
2
34
5
6
7
8
9
10
11
9
8
6
53
11
11
11
11
1. Front bumper plastic support2. Front bumper energy absorbing block 3. Cross slot & concave hexagon head self-tapping screw and large washer subassembly (Q2754819+Q422) 4. Front bumper left mounting bracket 5. Cross slot & concave hexagon head self-tapping screw and large washer subassembly (Q2756319+Q421) 6. Front bumper plastic nut seat 17. Front bumper body8. Hexagon head bolt and flat washer subassembly (Q1400616)9. Front bumper plastic nut seat 210. Front bumper right mounting bracket 11. Expansion button
Page 265 of 281
Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual258
7. Disconnect the wire harness of the left & right fog lamps.
8. Remove the bumper attachments.
Remove the front bumper plastic support and energy absorb-
ing block from the vehicle body respectively.
9. Remove the bumper bracket.
Screw off the cross slot & concave hexagon head self-tapping
screw and large washer subassembly (Q2756319+Q422) on the
left / right side mounting bracket of the front bumper, and pull
the left / right side mounting bracket out.Front bumper body
Front bumper body
Front bumper energy absorbing block
Front bumper plastic support
Front bumper left side mounting bracket
Cross slot & concave hexagon head self-tapping screw and large washer subassembly