wheel torque HONDA CR-V 2020 Owner's Manual (in English)
Page 121 of 671
Continued119
uuGauges and Displays uDriver Information Interface
Instrument Panel
Shows the outside temperature in Fahr enheit (U.S.) or Celsius (Canada).
■Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F  or ±3°C if the temperature reading 
seems incorrect.
Use the customized features in the driver information interface or audio/information 
screen to correct the temperature.
2 Customized Features  P. 121, 360
Shows the instant fuel economy as  a bar graph in mpg or l/100 km.
The indicators on the display show the 
amount of torque being transferred to the 
right front, left front, right rear, and left rear 
wheels.
2 Real Time AWD with Intelligent Control 
SystemTM* P. 521
■Outside Temperature
■Instant Fuel Economy
■AWD Torque Distribution Monitor*
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can 
affect the temperature reading when your vehicle 
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be 
updated after the temperature reading has stabilized.
* Not available on all models
20 CR-V PET ELP_MAP_HMIN_HCM_J-31TLA6310.book  119 ページ  2019年10月3日 木曜日 午後4時55分 
Page 503 of 671
501
uuWhen Driving uRoad Departure Mitigation (RDM) System
Continued
Driving
Road Departure Mitigation (RDM) System
Alerts and helps to assist you when the system detects a possibility of your vehicle 
unintentionally crossing over detected lane markings and/or leaving the roadway 
altogether.
The front camera behind the rearview mirror 
monitors left and right lane markings (in white 
or yellow). If your vehicle is getting too close 
to detected lane markings without a turn 
signal activated, the system, in addition to a 
visual alert, applies steering torque and alerts 
you with rapid vibrations on the steering 
wheel, to help you remain within the detected 
lane.
2 Customized Features  P. 121, 360
As a visual alert, the Lane Departure 
message appears on the driver information 
interface.
If the system determines that its steering input 
is insufficient to keep your vehicle on the 
roadway, it may apply braking. u Braking is applied only when the lane 
markings are solid continuous lines.
The system cancels assisting operations wh en you turn the steering wheel to avoid 
crossing over detected lane markings.
If the system operates several times with out detecting driver response, the system 
beeps to alert you.
■How the System Works
1 Road Departure Mitigation (RDM) System
Important Safety Reminder
Like all assistance systems, the RDM system has 
limitations.
Over-reliance on the RDM system may result in a 
collision. It is always your  responsibility to keep the 
vehicle within your driving lane.
The RDM system only alerts  you when lane drift is 
detected without a turn signal in use. The RDM 
system may not detect all  lane markings or lane 
departures; accuracy will  vary based on weather, 
speed and lane marker condi tion. It is always your 
responsibility to sa fely operate the vehicle and avoid 
collisions.
You can read about handling information for the 
camera equipped with this system.
2 Front Sensor Camera  P. 483
The RDM system may not wo rk properly or may work 
improperly under the certain conditions: 2 RDM Conditions and Limitations  P. 503
There are times when you may not notice RDM 
functions due to your opera tion of the vehicle, or 
road surface conditions.
20 CR-V PET ELP_MAP_HMIN_HCM_J-31TLA6310.book  501 ページ  2019年10月3日 木曜日 午後4時55分 
Page 507 of 671
505
uuWhen Driving uLane Keeping Assist System (LKAS)
Continued
Driving
Lane Keeping Assist System (LKAS)
Provides steering input to help keep the vehicle in the middle of a detected lane and 
provides tactile and visual al erts if the vehicle is detected drifting out of its lane.1Lane Keeping Assist System (LKAS)
Important Safety Reminders
The LKAS is for your convenience only. It is not a 
substitute for your vehicle control. The system does 
not work if you take y our hands off the steering 
wheel or fail to steer the vehicle.
2 Driver Information Interface Warning and 
Information Messages  P. 97
Do not place objects on the instrument panel. 
Objects may reflect on th e front windshield and 
prevent correct detectio n of the traffic lanes.
The LKAS only alerts you when lane drift is detected 
without a turn signal in use.  The LKAS may not detect 
all lane markings or lane  departures; accuracy will 
vary based on weather,  speed, and lane marker 
condition. It is always your responsibility to safely 
operate the vehicle an d avoid collisions.
The LKAS is convenient when it is used on freeways.
The LKAS may not work  properly or may work 
improperly under the certain conditions: 2 The LKAS Conditions and Limitations  
P. 511
You can read about handling information for the 
camera equipped with this system. 2 Front Sensor Camera  P. 483
■Steering input assist
The system applies torque to the 
steering to keep the vehicle between the 
left and right lane lines. The applied 
torque becomes stronger as the vehicle 
gets closer to either of the lane lines.
When you operate the turn signals to chan ge lanes, the system is suspended, and 
resumes after the signals are off.
If you make a lane change without operat ing the turn signals, the LKAS alerts 
activate, and torque is  applied to the steering.
■Front sensor camera
Monitors the lane 
lines■Tactile and visual alerts
Rapid vibrations on the steering 
wheel and a warning display alert 
you that the vehicle is drifting out of 
a detected lane.
20 CR-V PET ELP_MAP_HMIN_HCM_J-31TLA6310.book  505 ページ  2019年10月3日 木曜日 午後4時55分 
Page 619 of 671
Continued617
uuIf a Tire Goes Flat uChanging a Flat Tire
Handling the Unexpected
1. Remove the wheel nuts and flat tire.
2. Wipe the mounting surfaces of the wheel 
with a clean cloth.
3. Mount the compact spare tire.
4. Screw the wheel nuts until they touch the 
lips around the mounting holes, then stop 
rotating.
5. Lower the vehicle and remove the jack. 
Tighten the wheel nuts in the order 
indicated in the image. Go around, 
tightening the nuts, two to three times in 
this order.
Wheel nut torque:
80 lbf∙ft (108 N∙m, 11 kgf∙m)
■Replacing the Flat Tire1Replacing the Flat Tire
Do not over tighten the wheel nuts by applying extra 
torque using your  foot or a pipe.
20 CR-V PET ELP_MAP_HMIN_HCM_J-31TLA6310.book  617 ページ  2019年10月3日 木曜日 午後4時55分