HONDA CR-Z 2011 1.G Owners Manual

140
Features
Audio System Audio System Theft Protection
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the 12 volt battery is disconnected or goes dead.Entering the Audio Security Code
■
“ENTER CODE” appears on the display when the power is reconnected.
Turn on the audio system.
1.
Enter the security code using the preset buttons.
2.
Models with navigation system
Touch the icon to enter the code, then touch the Done icon to set it. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information from a dealer.
Main MenuTable of Contents

141
Features
Audio without Navigation System
Audio System Basic Operation To use the audio system function, the ignition switch must be in ACCESSORY
I or
ON
II.
Use the VOL/SELECT knob to access some audio functions. VOL/SELECT knob: Turns left and right to select the items. Press
to set your selection.
button: Press to go back to the previous
display.
Audio System Basic Operation
These indications are used to show how to move the VOL/SELECT knob .
Rotate
to select.
Press
to ENTER.
VOL/SELECT (Volume/Select) Knob Button
Main MenuTable of Contents

142
Features
Audio without Navigation System Audio System Basic Operation
Adjusting the Sound
■
Press the button, and rotate to adjust
the setting. Each time you press the
button, a sound
mode switches as follows.
Adjusting the Sound
When the adjustment level reaches the center, you will see "C" in the display. The SVC has four modes: OFF, LOW, MID, and HIGH.SVC adjusts the volume level based on the vehicle speed. The faster you go, the audio volume increases. As you slow down, the audio volume decreases.
(Sound)
Button
VOL/SELECT Knob
BASS
TREBLE
FADER
BALANCE
SUBW
SVC Subwoofer
*
Speed-sensitive VolumeCompensation
* Not available on all models
Main MenuTable of Contents

143
Features
Audio without Navigation System Playing the AM/FM Radio
Playing the AM/FM Radio
(Power) Button
Press to turn the audio
system ON and OFF.
VOL/SELECT Knob
Turn to adjust the volume.
Turn to tune the radio frequency. Preset Buttons (1-6)To
store the station:
1. Tune to the selected station.
2. Pick a preset button and hold it until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
FM/AM ButtonPress to select a band.
TITLE ButtonPress to switch the RDS name
on and off.
/ Button Press to display and select an
RDS category.
SCAN ButtonPress to sample the strongest stations on the selected band for 10 seconds each. To turn off scan, press the button again.
SEEK Buttons •
Press to change a station.
• Press and hold to search up and down the selected band for a station with a strong signal. A.SEL (Auto Select) ButtonPress to scan both bands and store the strongest station in each preset.To
turn off auto select, press the
button again. This restores the presets you originally set.
Main MenuTable of Contents

144
Features
Audio without Navigation System Playing the AM/FM Radio
Radio Data System (RDS)
■
Provides text data information related to your selected RDS capable FM station.
RDS INFO ON
■
Press the TITLE button while listening to an RDS capable station. “RDS INFO ON” appears, and the station name is displayed.
To Find an RDS Station from Your Selected Program

■
Category
1. Press the
/ button to
display and select an RDS category. Use the SEEK
2. or SCAN function to select
an RDS station.
Playing the AM/FM Radio
A stereo indicator (ST) comes on the display for stereo FM broadcasts. Stereo reproduction in AM is not available. Switching the Audio Mode Press the MODE button on the steering wheel.
Audio Remote Controls P.1 6 9
You can store six AM stations and twelve FM stations in the preset buttons. FM1 and FM2 let you store six stations each. A.SEL function scans and stores up to six AM stations and twelve FM stations with a strong signal in the preset buttons. If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons manually.
Radio Data System (RDS)
The display shows up to 31 characters of text data. Press and hold the TITLE button to see additional characters.
indicates that the text data
continues. The display goes back to the previous screen if you press and hold the button again.
RDS Category
Main MenuTable of Contents

145
Features
Audio without Navigation System Playing a CD
Playing a CD Your audio system supports audio CDs, CD-Rs, and CD-RWs in either MP3 or WMA format. With the disc loaded, press the CD button.
Disc Slot Insert a CD about halfway into the disc slot.
(Disc Eject) Button
Press to eject a disc.
SEEK Buttons
Press or to change tracks (iles in MP3 or WMA). CD ButtonPress to play a CD.
VOL/SELECT
(Volume/Select) Knob
Turn to change tracks/iles. Turn to select an item, then press the VOL/SELECT knob to set your selection.
SCAN Button
You will get a 10-seconds sampling of each song.
• Press to sample all tracks on the disc (all iles in the current folder in MP3 or WMA).
• Press two times to sample the irst ile in each of the main folders (MP3 or WMA).
• To turn off scan, press and hold the button. RDM (Random) Button
• Press to play all tracks/iles on a disc in random order.
• Press two times to play all iles in the current folder (MP3 or WMA)
in random order.
• To turn off random, press and hold the button.
TITLE Button Press to display the text data on a CD (if it was recorded with text data).
/ Button
Press the button to skip to the next folder, and the button
to skip to the beginning of the previous folder in MP3 or WMA.
RPT (Repeat) Button
• Press to replay a track/ile continuously.
• Press two times to replay all iles in the current folder.
• To turn off repeat, press and hold the button.
(Power) Button
Press to turn the audio
system ON and OFF.
Main MenuTable of Contents

146
Features
Audio without Navigation System Playing a CD
How to Select a File from a Folder with the VOL/SELECT
■
Knob (MP3/WMA)
Press
1.
to switch the display to a folder list.
Rotate
2.
to select a folder.
Press the button to play the first file on the selected folder.
Press
3.
to change the display to a file list of that folder.
Rotate
4.
to select a file, then press .
Playing a CD
NOTICE Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit. WMA iles protected by digital rights management (DRM) cannot be played.The audio system displays UNSUPPORTED, then skips to the next ile. Text data appears on the display under the following circumstances:
When you select a new folder, ile, or track.

•
When you change the audio mode to CD.

•
When you insert a CD.

•
The display shows up to 31 characters of text data.Press and hold the TITLE button to see additional characters.
indicates that the text data
continues. The display goes back to the previous screen if you press and hold the button again. If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.
Main MenuTable of Contents

147
Features
Audio without Navigation System Playing an iPod®

Playing an iPod ®
Connect your iPod using your dock connector to the USB adapter cable, then press the AUX button.
Connecting an iPod/USB Flash Memory Device P.138
Button
Press to set your selection. AUX Button Press to select iPod
®
(if connected).
Button Press to go back to the previous
display.
VOL/SELECT
(Volume/Select) Knob
Turn to select a song, ile, menu item, or play mode. Press the VOL/SELECT knob to set. TITLE Button Press to display the text data.
RDM (Random) Button
• Press to play all available iles in a selected list (playlists, artists, albums
or songs) in random order.
• Press two times to play all available albums in a selected list (playlists, artists, albums or songs) in random
order.
•
To turn off shufle mode, press and
hold the button.
RPT (Repeat) Button
• Press to replay a ile continuously.•
To turn off repeat, press the button again.
SEEK Buttons
Press or to change songs. (Power) Button
Press to turn the audio
system ON and OFF.
Main MenuTable of Contents

148
Features
Audio without Navigation System Playing an iPod®

How to Select a File from iPod Menu
■
Press
1. to display the iPod menu.
Rotate
2.
to select a menu.
Press
3.
to display the items on that menu.
Rotate
4.
to select an item, then press .
Playing an iPod ®
Use only compatible iPods with the latest software.
This audio system cannot operate an iPod as a mass storage device.
General Information P.13 7
Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system.
If there is a problem, you may see an error message on the audio display.
iPod ®
Error Messages P.1 6 8
Main MenuTable of Contents

149
Features
Audio without Navigation System Playing a USB Flash Memory Device
Your audio system reads and plays sound files on a USB flash memory device in either MP3, WMA or AAC *1
format.
Connect your USB flash memory device to the USB adapter cable, then press the AUX button.
Connecting an iPod/USB Flash Memory Device P.138
* 1: Only AAC format iles recorded with iTunes ®
are playable on this audio unit.
VOL/SELECT
(Volume/Select) Knob
Turn to select a ile, then press the
VOL/SELECT knob to play.
SCAN Button
You will get a 10-second sampling of each ile.
• Press to sample all iles in the current folder.
• Press two times to sample the irst ile in each of the main folders.
• To turn off scan, press and hold the button. RDM (Random) Button
• Press to play all iles in random
order.
• Press two times to play all iles in the current folder in random
order.
• To turn off random, press and hold the button.
TITLE ButtonPress to display the text data.
Press the button to skip to the next
folder, and the button to skip to the
beginning of the previous folder.
RPT (Repeat) Button
• Press to replay a ile continuously.
• Press two times to replay all iles in the current folder.
• To turn off repeat, press and hold the button.AUX ButtonPress to select USB lash memory device (if connected).
/ Button
SEEK Buttons
Press or to change iles. (Power) Button
Press to turn the audio
system ON and OFF.
Playing a USB Flash Memory Device
Main MenuTable of Contents