navigation system HONDA CR-Z 2016 1.G Navigation Manual
Page 25 of 249
24
System Setup
Voice Control System
Your vehicle has a voice control system that allows hands-free operation of most of
the navigation system functions. You can also control the audio and climate control
system
*, and make and receive phone calls using Bluetooth® HandsFreeLink ®.
The voice control system uses the ( Talk) and (Hang-Up/Back) buttons on
the steering wheel and microphones at the bottom of the navigation screen.
A “Getting Started” feature provides a tutorial that explains how to use the voice
control system.
2 Voice Help P. 16
Command Input
If the system does not understand a command or you wait too long to give a
command, the system asks you to repeat the command.
When you give a command, the system gene rally either repeats the command as a
confirmation or asks you for further information. If you do not wish to hear this
feedback, you can turn it off. However, list ening to the feedback will help familiarize
you with the way the system expects commands to be phrased.
2 Voice Recognition Settings P. 71
On character input screens, a list of possibl e characters is displayed if the system
does not recognize your command.
You can find out which voice commands ar e available for a particular screen using
the “ Voice Help ” command. The system will display and read the list of available
commands to you.
2 Voice Help P. 16
1Voice Control System
When you press the (Talk) button, a helpful
prompt asks what you would like to do. Press and
release the (Talk) butt on again to bypass this
prompt and give a command.
* Climate control voice co mmands are only available
on some Canadian models.
1 Command Input
The audio system is muted while using the voice
control system.
16 CR-Z NAVI-31SZT8500.book 24 ページ 2015年7月30日 木曜日 午前9時18分
Page 26 of 249
25
uuVoice Control System uVoice Recognition
System Setup
Voice Recognition
To achieve optimum voice recognition when using either the navigation voice
control system or Bluetooth® HandsFreeLink ®:
• Make sure the correct screen is displa yed for the voice command that you are
using.
2 Voice Commands P. 232
• Close the windows.
• Adjust the dashboard and side vents so air does not blow onto the microphones
at the bottom of the navigation screen.
• Speak clearly in a natural speaking voice without pausing between words.
• Reduce any background noise if possibl e. The system may misinterpret your
command if more than one person is speaking at the same time.
• Refer to the Voice Help tutorial.
2 Voice Help P. 16
16 CR-Z NAVI-31SZT8500.book 25 ページ 2015年7月30日 木曜日 午前9時18分
Page 28 of 249
27Continued
System Setup
Display Mode Settings
Turning Off the Display
Press the (Display Mode) button for more than two seconds.
u Select HOME or BACK , or press the (Display Mode) button to turn on the
display.
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the
(Display Mode) button to cycle through the display modes (Day to Night to Off).
Press the (Display Mode)
button.
uThe Brightness bar is displayed for
a few seconds.
u Select or to adjust the
brightness.
1Switching Display Mode Manually
The display brightness ca n be changed from the
System settings screen as well. 2 Display P. 67
You can also adjust the display brightness by sliding
or flicking on the bar.
The map color is also switched depending on the Day
and Night mode. The map color can be set on the
Navigation settings screen. 2 Color P. 55
Illumination
control Priority
Operation
button1Selects Day or Night display mode when the user
wants to change the brightness of the display
temporarily.
Remember: This button overrides all other display
brightness adjustments either set automatically by the
sunlight sensor or manual ly from the System settings
screen.
16 CR-Z NAVI-31SZT8500.book 27 ページ 2015年7月30日 木曜日 午前9時18分
Page 30 of 249
29
System Setup
Personal Information
HHOME uSettings uNavigation uPersonal Info tab
Use the personal informatio n menu to select and set your address books, home
addresses, and PINs. You can also delete previously routed destinations and
previously selected categories.
Select an item.
The following items are available:
• Address Book : Stores new addresses or edits your address book.
2Address Book P. 30
•Edit Go Home 1 : Sets or edits your home address.
2Home Addresses P. 35
•Edit Go Home 2 : Sets or edits another home address.
2Home Addresses P. 35
•PIN Number : Sets or changes your PIN.
2PIN Number P. 36
•Previous Destination : Deletes the destination history.
2Previous Destination P. 38
•User Name : Sets or changes your user name.
2User Name P. 37
•Category History : Deletes the category history.
2Category History P. 39
16 CR-Z NAVI-31SZT8500.book 29 ページ 2015年7月30日 木曜日 午前9時18分
Page 31 of 249
30
uuPersonal Information uAddress Book
System Setup
Address Book
H HOME uSettings uNavigation uPersonal Info tabuAddress Book
Store up to 200 address entries in two address books ( Driver 1 and Driver 2 ). You
can add, edit, and delete info rmation in the address books.
Select the driver to edit the address
book.
uThe address book is displayed.
u Select the category tab to display
only the addresses in the selected
category.1Address Book
The number of addresses is shared by the two
address books. For example, if Driver 1 has 150
addresses, Driver 2 can only have 50.
If you have PIN-protecte d your address book, enter
your PIN when prompted. Select OK. PINs are
optional. 2 PIN Number P. 36
Any address book categories you create are also
displayed on the Address book screen.
2 Selecting an Address Book Category P. 33
16 CR-Z NAVI-31SZT8500.book 30 ページ 2015年7月30日 木曜日 午前9時18分
Page 32 of 249
Continued31
uuPersonal Information uAddress Book
System SetupH HOME uSettings uNavigation uPersonal Info tabuAddress Book
This section explains how to enter the name and address. 1.Select the driver to add the new
address.
2. Select Add New Address .
3. Select an item.
The following items are available:
• Name: Edits the name of the entry.
• Address : Edits the address of the entry.
• Phone No. : Edits the phone number of the entry.
• Category : Specifies the category of the entry.
■Adding an Address Book Entry1
Adding an Address Book Entry
If you do not give the address a name, one is
automatically assigned (e.g., Address 001). You can
re-enter, edit, or make changes to any entry.
“Address ” is the only required field.
16 CR-Z NAVI-31SZT8500.book 31 ページ 2015年7月30日 木曜日 午前9時18分
Page 34 of 249
Continued33
uuPersonal Information uAddress Book
System SetupH HOME uSettings uNavigation uPersonal Info tabuAddress Book
1. Select the driver and then select
the address to edit.
2. Enter the name, address, phone
number, and category fields.
2 Adding an Address Book
Entry P. 31
3.Select OK.
H HOME uSettings uNavigation uPersonal Info tabuAddress Book
1. Select the driver and then select an
address.
2. Select Category .
3. Select BUSINESS , PERSONAL , or
a category you created.
■ Editing an Address Book Entry1
Editing an Address Book Entry
The entered contents are displayed on the Edit
address screen.
■ Selecting an Address Book Category
1
Selecting an Addr ess Book Category
You can have a total of 100 categories (including
“Unfiled”). But these cate gories cannot be shared
with two address books.
If you delete a category that is used by other
addresses, the category type for those addresses
changes to “Unfiled.”
Category Icons
The following icons can be selected for a category:
16 CR-Z NAVI-31SZT8500.book 33 ページ 2015年7月30日 木曜日 午前9時18分
Page 35 of 249
uuPersonal Information uAddress Book
34
System Setup
■ Creating a New Category
1. Select New Category .
2. Enter a name and select an icon when prompted. Select OK.
u The created category is displa yed in the list of categories.
■ Deleting or Editing a Category
1. Select Edit or Delete .
2. Select a category and delete, or change the name and icon.
H HOME uSettings uNavigation uPersonal Info tabuAddress Book
1. Select the driver and then select
the address to delete.
2. Select Delete.
3. Select Yes.
■Deleting an Address Book Entry1
Deleting an Address Book Entry
When you transfer the vehicle to a third party, delete
all address book entries.
16 CR-Z NAVI-31SZT8500.book 34 ページ 2015年7月30日 木曜日 午前9時18分
Page 36 of 249
35
uuPersonal Information uHome Addresses
System Setup
Home Addresses
H HOME uSettings uNavigation uPersonal Info tabuEdit Go Home 1 or
Edit Go Home 2
Set two home addresses that you frequently use. 1.Edit the name, address, and phone
number the same way as an
address in the address book.
2 Adding an Address Book
Entry P. 31
2.Select OK.
1Home Addresses
If you have PIN-pr otected your home addresses, enter
your PIN when prompted. Select OK. PINs are
optional.
2 PIN Number P. 36
If your home street is not in the system database,
park on the nearest verified street to your home.
When entering the “ Address” field, select Current
Position to use your current location as the home
address.
You can delete a home addr ess if necessary. Select
Clear Home Entry . Select Yes.
When you transfer the vehicle to a third party, delete
all home addresses.
The home icon is shown on the map screen in the
5 mile (8 km) or less scales.
16 CR-Z NAVI-31SZT8500.book 35 ページ 2015年7月30日 木曜日 午前9時18分
Page 37 of 249
36
uuPersonal Information uPIN Number
System Setup
PIN Number
H HOME uSettings uNavigation uPersonal Info tabuPIN Number
Set a 4-digit PIN for protecting personal ad dresses and your home addresses. Once
you set a PIN, you are prompted to enter it whenever you access a personal address
or a home address for the first time after setting the power mode to ACCESSORY or
ON.
1.Select the PIN to create.
2. Select the driver (when selecting
Address Book PIN ).
3. Enter a 4-digit PIN.
4. Re-enter the new PIN when
prompted to confirm the number
you just enter.
u If you do not enter the same
number both times, an
Incorrect PIN message is
displayed. Enter your PIN again.1 PIN Number
PIN
Personal Identification Nu mber (PIN) is a password
used to access some personal data.
PINs are optional. If you choose to use a PIN, keep a
note of the number in a secure location. If you forget
your PIN, contact your deal er. The factory default is
no PIN.
Go Home PIN
Go Home PINs are the same for Driver 1 and Driver
2. If a Go Home PIN is set, it must be entered when:
•selecting Go Home for a destination•selecting Home Address for editing
If you want to stop using a PIN, select Turn off PIN
entry .
16 CR-Z NAVI-31SZT8500.book 36 ページ 2015年7月30日 木曜日 午前9時18分