fuse box diagram HONDA PRELUDE 1998 Owners Manual

Fuses

Checking and Replacing Fuses

If something electrical in your
vehicle stops working, the first thing you should check for is a blown fuse. Determine from the chart on pages 248 and 249, or the diagram on the
fuse box lid, which fuse or fuses control that component. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is not the cause. Replace any blown
fuses and check the component's
operation.

1. Turn the ignition switch to LOCK (0). Make sure the headlights and
all other accessories are off.
2. Remove the cover from the fuse
box.
3. Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wireinside. Removing these fuses
requires a Phillips-head screw-driver. 4. Check the smaller fuses in the
under-hood fuse box and all the
fuses in the interior fuse box by
pulling out each fuse with the fuse
puller provided in the interior fuse
box.
Taking Care of the Unexpected
FUSE

BLOWN
FUSE PULLERProCarManuals.comMain Menu Table of Contents s t