cooling Hyundai Santa Fe Sport 2016 Quick Reference Guide

FEATURES AND CONTROLS
SANTA FE
19 18
HYUNDAI
Press the DUAL button to
operate the driver and passenger
side temperature individually.DUAL BUTTON
DEFROSTING / DEFOGGING
3. Set the fan speed to
the highest setting. 2. Set the temperature
control towards
warmer setting.1. Press the front
windshield defrost
button.
SYSTEM OFF MODEPressing the OFF button will place the system in the off mode.r Front blower will turn off.r Outside (fresh) air position
selected.r Vented air at last set temperature.
Press to activate /
deactivate
the rear defroster.
REAR WINDOW DEFROSTER AUTOMATIC HEATING
AND COOLING
2. Set the driver's
temperature control
to the desired setting. 1. Press the AUTO
button.
The modes, fan speeds, air
intake, and air-conditioning will be
controlled automatically according
to the temperature setting.
Changing the
direction of the
air flow as follows:
MODE SELECTION
Floor &
Defrost
Face
Level
Bi-
Level
Floor
Level
Automatic Climate Control
Type AAutomatic Climate Control
Type B
AIR INTAKE CONTROL
Recirculated air positionOutside (fresh) air position
%6"-
%6"-
Type B Type B Type A Type A

Air conditioning button Driver’s temperature
control button Mode selection button
Air intake control buttons Front windshield defrost button Fan speed control knob AUTO (automatic control) button
OFF button Rear window defrost button
Dual temperature control
selection button
Passenger’s temperature
control button Climate control information
screen selection button
NOTETo reduce tendency of the glass
fogging and also improve visibility,
keep the interior surface of the
windshield clean by wiping it with
a clean cloth and glass cleaner.
In addition, select air intake control
to the outside (fresh) air position
whenever possible while operating
the vehicle.
The auto deffogging system automatically controls moisture
of inside the windshield. To enable or disable the system,
press the front defroster button 4 times within 2 seconds
while pressing the AUTO button.
AUTO DEFOGGING SYSTEM

MULTIMEDIA
SANTA FE
23 22
HYUNDAI
To Answer a Call:
r

1SFTT


button on the steering wheel.
To Reject a Call:
r

1SFTT

button on the steering wheel.
To Adjust Ring Volume:
r
6TF
UIF
70-6.&
CVUUPOT
PO
UIF
TUFFSJOH
XIFFM
To Transfer a Call to the Phone
(Private Call):
r

1SFTT
BOE
IPME


button on the steering wheel until the
audio system transfers a call to the phone.
To Finish a Call:
r

1SFTT

button on the steering wheel.
BLUETOOTH OPERATIONAL TIPSIn the following situations you or the other party may have difficulty
hearing each other:
1. Keep the Bluetooth volume to a low level. High level volume may result
in distortion and echo.
2. When driving on a rough road, high speeds and/or with the window open.
3. When the air conditioning vents are facing the microphone and/or when
the air conditioning fan is at the max speed.
To redial previously dialed number,
press and hold .Steering wheel bluetooth control
VOLUME

Raises or lowers speaker volume.MUTEMute the microphone during a call.TALKActivates voice recognition.CALL

Places and transfers calls.ENDEnds calls or cancels functions.
Making a call using voice recognition: The menu tree identifies available voice recognition Bluetooth
® functions.
Calling by Name:1. P
ress
button.
2. Say the following command:


r
i$BMM
+PIOu
$POOFDUT
UIF
DBMM
UP
+PIO

r
i
$BMM
+PIO
PO
.PCJMF)PNF0GGJDF
$POOFDUT
UIF
DBMM

to John’s Mobile, Home, or Office phone number.
Dialing by Number:1.
Press
button.
2. Say “Call”.
3. Say “By number” when prompted.
4. Say desired phone numbers.
5. Say “Dial” to complete the number and make a call.
For complete list of commands, refer to your Owner’s Manual.VOICE RECOGNITION TIPSYour vehicle is equipped with Voice Recognition technology which allows
drivers to operate their phones without having to take their eyes off the road
to minimize distractions.
Voice recognition performance may be affected if driving with windows
and sun roof open; when the heating-cooling system is on; when passing in
a tunnel or when driving on rugged and uneven roads.
Quick reference on using voice commands
To start voice command. Press the
key, the following commands are available:
Command FunctionMore Help Provides guidance on commands that can be used anywhere in the system
Help Provides guidance on commands that can be used within the current mode.
Calls <Name> Calls <Name> saved in Contacts. Ex) Call “John”
Dial <Number>Call can be made by dialing the spoken numbers. Ex) Call “123”
Phone Provides guidance on Phone related commands. After saying this command,
say “Call History”, “Contacts” to execute corresponding functions.
Call History Displays the Call History screen.
Contacts
(Call by NameDisplays the Contacts screen. After saying this command, say the name of a
contact saved in the Contacts to automatically connect the cell.
Dial Number Display the Dial number screen. After saying this command, you can say the
number what you want to call.