INFINITI JX 2013 Navigation Manual

Black plate (91,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5 Route guidance
Procedures after setting destination...
.................... 5-2
Starting route guidance ...
................................... 5-2
Selecting route ...
................................................ 5-3
Confirming route ...
............................................. 5-3
Moving location of destination ...
........................ 5-5
Storing location ...
............................................... 5-5
Viewing information about searched location ...
... 5-6
About route guidance ...
.......................................... 5-7
Voice guidance during route guidance ...
............. 5-7
Guidance screens and preview mode ...
............... 5-8
Guidance screen settings ...
................................ 5-9
Route screen ...
..................................................... 5-13
Basic operation ...
............................................. 5-13
Canceling/reactivating route ...
.......................... 5-14 Editing route
...
................................................ 5-15
Confirming route ...
.......................................... 5-20
Guidance settings ...
........................................ 5-21
Recalculate route ...
......................................... 5-22
Setting detour route ...
.................................... 5-23
Searching for detour route taking traffic
information into consideration ...
..................... 5-24
Setting conditions for route calculation ...
........ 5-25
Route guidance settings ...
.................................... 5-27
Basic operation ...
............................................ 5-27
Setting voice guidance at intersections ...
........ 5-28
Displaying small turn arrow on map ...
............ 5-29
Switching estimated arrival time display ...
...... 5-29
Set average speeds ...
..................................... 5-30
Condition: Language=NAM_English/

Black plate (92,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-2
PROCEDURES AFTER SETTING DESTINA-
TION
After performing a route search, the route
guidance can be immediately started. Also,
it is possible to confirm or change a route.
IRG0085Available items after setting destination. [Start]:
Starts route guidance to the selected
destination.
“Starting route guidance”
(page 5-2)
. [More Routes]:
Displays 3 alternative routes.
“Selecting route” (page 5-3)
. [Add/Route Info]:
Displays the route information. A desti-
nation or a waypoint can also be
added.
“Confirming route” (page 5-3)
. [Move Location]:
Displays a map screen. The location of
the destination can be adjusted.
“Moving location of destination”
(page 5-5)
. [Store Location]:
Stores the location in the Address
Book.
“Storing location” (page 5-5)
. [Place Info]:
Displays information about the facility
that has been set as the destination, if
it is included in the map data.
“Viewing information about
searched location” (page 5-6)
INFO:
.
If no operations have been performed on the
system for several seconds, [Start] is auto-
matically selected, and the system starts
route guidance.
.When using waypoints, [More Routes] is
disabled. After the route is started, push
<ROUTE> then select [Edit/Add to Route] to
change the route between each waypoint.
.The same screen as when [Move Location] is
selected can be displayed with the following
operations:
—Touching the map screen
—Pushing the directional buttons except
for the up/down button (INFINITI con-
troller with directional buttons)
—Pushing the slide switch except in the
upward/downward direction (INFINITI
controller without directional buttons)
STARTING ROUTE GUIDANCE
IRG00851. Highlight [Start] and push <ENTER>.
Route guidance starts.
Condition: Language=NAM_English/

Black plate (93,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
SELECTING ROUTE
IRG00861.Highlight [More Routes] and push
<ENTER>.
IRG00872. Highlight the preferred route condition
and push <ENTER>.
3. The display automatically returns to the map screen.
Available route conditions . [Short. Time] (purple):
Prioritizes by the shortest time. .
[Min. Freeway] (orange):
Minimizes the use of freeways.
. [Short. Dist.] (green):
Prioritizes by the shortest distance.
INFO:
.
When the route is selected, a preview is
displayed on the right side of the screen.
.The 3 routes may not always be different.
CONFIRMING ROUTE
IRG00881. Highlight [Add/Route Info] and push <ENTER>.
2. Highlight the preferred information
item and push <ENTER>.
3. Push <BACK>to return to the previous
screen.
IRG0089Available information
. [Turn List]:
Displays the details of the suggested
route.
“Using turn list” (page 5-20)
. [Preview]:
The system will trace the planned route
going forward or in reverse.
“Using route preview” (page 5-21)
. [Add Way Pt.]:
Edits the route by adding a waypoint or
a destination.
“Adding destination or waypoint”
(page 5-4)
. [Store Route]:
Stores a calculated route. A maximum
of 5 routes can be stored. Stored routes
can be easily retrieved and set as the
suggested route.
5. Route guidance
5-3
Condition: Language=NAM_English/

Black plate (94,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-4
“Storing route”(page 6-5)
. [Map Scroll]:
Displays a map screen where the
location of the destination can be
confirmed.
The same screen as when [Map Scroll]
is touched can be displayed with the
following operations:
—
Touching the map screen.
—Pushing the directional buttons except
for the up/down button (INFINITI con-
troller with directional buttons).
—Pushing the slide switch except in theupward/downward direction (INFINITI
controller without directional buttons).
Adding destination or waypoint
Before starting route guidance, destina-
tions and/or waypoints can be added. A
total of 6 destinations or waypoints can be
set.
IRG00901. Highlight [Add Way Pt.] and push
<ENTER>.
IRG00912.Set additional destinations or way-
points and push <ENTER>.
The method of searching for a location
is the same as the one for a destina-
tion.
“4. Setting destination”
IRG00923. Highlight [Add Destination] or [Add
Waypoint] and push <ENTER>.
IRG00934. The system starts calculating a route
that includes the added destination or
waypoint. When the calculation is
finished, the route is displayed.
INFO:
.
If a waypoint was added, [More Routes]
cannot be selected.
Condition: Language=NAM_English/

Black plate (95,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
.If a destination was added, the prior
destination becomes a waypoint.
MOVING LOCATION OF DESTINATION
The location of the destination can be
adjusted by moving the cross pointer
across the map.
IRG00941.Highlight [Move Location] and push
<ENTER>.
INFO:
The screen for adjusting the location also
changes by touching the map screen dis-
played on the right side of the screen.
IRG00952. Adjust the location by moving the cross
pointer across the map and push
<ENTER>. The location of the destination
is modified.
INFO:
.
The map scale can be changed by turning
the center dial or touching the scale icon.
The map scale can also be changed by
pressing <ZOOM IN>/<ZOOM OUT> (if so
equipped).
.The same screen as when [Move Location] is
touched can be displayed with the following
operations:
—Touching the map screen.
—Pushing the directional buttons except
up/down buttons (INFINITI controller
with directional buttons).
—Pushing the slide switch except upward/
downward (INFINITI controller without
directional buttons).
STORING LOCATION
A searched location can be stored in the
Address Book. Then it can be easily
retrieved and set as a destination (or
waypoint).
IRG00961. Highlight [Store Location] and push
<ENTER>.
IRG0097
5. Route guidance
5-5
Condition: Language=NAM_English/

Black plate (96,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-6
2. The location is stored in the AddressBook. The corresponding icon is dis-
played at the set location on the map.
VIEWING INFORMATION ABOUT
SEARCHED LOCATION
Information (street address and phone
number) about places stored in the map
data can be displayed.
IRG00981. Select [Place Info] and push <ENTER>.
JNE0144M
2. Information about the location is dis-
played.
3. Push <BACK>to return to the previous
screen.
INFO:
.
If [Call] is displayed on the right side of the
screen, it is possible to call the location
indicated.
.The Bluetooth®Hands-Free Phone system is
required to be active and the cellular phone
connected to call the location indicated.
.Information about locations is not displayed
while driving.
Condition: Language=NAM_English/

Black plate (97,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
ABOUT ROUTE GUIDANCE
After setting the route, select [Start] to
begin route guidance.
Throughout route guidance, the system
navigates you through the guide points
using visual and voice guidance.
CAUTION!GUID-37A33049-40E4-4C0E-9613-022BD3C96297.The navigation system’s visual and voice
guidance is for reference purposes only.
The contents of the guidance may be
inappropriate depending on the situa-
tion.
. Follow all traffic regulations when driving
along the suggested route (e.g., one-way
traffic).
“Route guidance” (page 10-10)
VOICE GUIDANCE DURING ROUTE
GUIDANCE
When approaching a guide point (intersec-
tion or corner), destination, etc. during
route guidance, voice guidance announces
the remaining distance and/or turning
direction. Push<VOICE>to repeat voice
guidance.
5. Route guidance
5-7
Condition: Language=NAM_English/

Black plate (98,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-8
Example of voice guidance
INI0119
*1“In about one quarter mile (400
meters), right (left) turn.”
“Right (left) turn ahead.”
*2“In about one quarter mile (400
meters) freeway entrance on your right
onto (road number and direction).”
“Freeway entrance on your right onto
(road number and direction).”
*3“In about one mile (1.6 kilometers),
exit on your right.”“Exit on your right.”
*4“You have arrived at your destination.
Ending route guidance.”
GUIDANCE SCREENS AND PREVIEW
MODE
Route guidance displays map screens and
various information according to the situa-
tion.
IRG0100When route guidance starts, the Small Turn
Arrow on Map is displayed in the upper left
corner of the map screen. This arrow
indicates the turning direction at the next
guide point (corner or intersection). The
distance is also displayed. At the top of the
screen, the distance to the next guide point
and the name of the next street to turn on
to are displayed. Also, there may be cases
that next street names are announced. The
Small Turn Arrow on Map can be enabled
or disabled by the user.
“Displaying small turn arrow on map”
(page 5-29)
Condition: Language=NAM_English/

Black plate (99,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Enlarged intersection view
IRG0101When approaching a guide point, the
system automatically changes to the split
screen and shows an enlarged view of the
intersection on the left screen. After
passing through the intersection, the
system automatically returns to the full
screen mode. To switch to the full screen
mode while the enlarged intersection view
is displayed, push<MAP>. Pushing<MAP>
again displays the enlarged intersection
view.
Junction guidance
IRG0102While driving on a freeway, when the
vehicle is approximately 1 mile (approxi-
mately 2 km) from a junction, the system
automatically switches to the split screen
and displays an enlarged view of the
junction (3D) on the left screen. After
passing the junction, the system automa-
tically returns to the full screen mode. To
switch to the full screen mode while the
enlarged junction view is displayed, push
<MAP>.
Turn list
IRG0103Depending on the setting, the system can
constantly display the split screen and
show the turn list on the left screen. When
approaching a guide point, the left screen
automatically switches to an enlarged view
of the intersection. To switch to the full
screen mode, push <MAP>. Pushing<MAP>
again displays the turn list.
“Guidance screen settings” (page 5-9)
GUIDANCE SCREEN SETTINGS
The guidance screen can be displayed at
all times even when the vehicle is located
away from the guide point. Various types of
screens can be set.
5. Route guidance
5-9
Condition: Language=NAM_English/

Black plate (100,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-10
Split screen settings
The display setting on the left-hand side
screen shown during route guidance can
be changed.
IRG01041. Push<ENTER>while the current location
map screen is displayed.
2. Highlight [Map View] and push
<ENTER>.
IRG01053.Highlight [View Settings] and push
<ENTER>. 4.
Highlight the preferred screen and
push <ENTER>. The indicator of the
selected screen illuminates.
Intersection:
IRG0101The map screen and the enlarged intersec-
tion view can be displayed at the same
time.
Push <MAP> to switch to the full map
screen.
Turn list:
IRG0106
The list screen for showing the guide
points to the destination and the map
screen can be displayed at the same time.
An enlarged intersection view is automati-
cally displayed when the vehicle ap-
proaches the guide point.
The turn list can be scrolled using the
center dial, the main directional buttons,
the slide switch or by touching the up/
down button on the screen.
Push <MAP> to switch to the full map
screen. Push <MAP>again to display the
turn list.
Fuel Economy:
The current fuel consumption rate, average
fuel consumption rate, instantaneous con-
sumption rate and distance to empty can
be displayed on the map screen. An
enlarged intersection view is automatically
displayed when the vehicle approaches the
guide point.
Push <MAP> to switch to the full map
screen.
Push <MAP> again to display the fuel
economy screen. When approaching a
guide point, the enlarged view of the
intersection is automatically displayed. To
Condition: Language=NAM_English/