ISUZU TF SERIES 2004 Workshop Manual
Page 841 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-183
CIRCUIT DIAGRAM WITHOUT ANTI THEFT (RHD) G.EXP
RTW48AXF009701
Page 842 of 4264
8A-184 ELECTRICAL-BODY AND CHASSIS
CIRCUIT DIAGRAM WITH ANTI THEFT (RHD) G.EXP
RTW48AXF009801
Page 843 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-185
CIRCUIT DIAGRAM WITHOUT ANTI THEFT (RHD) EUROPE
RTW48AXF032001
Page 844 of 4264
8A-186 ELECTRICAL-BODY AND CHASSIS
CIRCUIT DIAGRAM WITH ANTI THEFT (RHD) EUROPE
RTW48AXF010001
Page 845 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-187
CIRCUIT DIAGRAM WITH ANTI THEFT (LHD) G.EXP
RTW48AXF009601
Page 846 of 4264
8A-188 ELECTRICAL-BODY AND CHASSIS
CIRCUIT DIAGRAM WITH ANTI THEFT (LHD) G.EXP
RTW48AXF031901
Page 847 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-189
CIRCUIT DIAGRAM WITHOUT ANTI THEFT (LHD) EUROPE
RTW48AXF009901
Page 848 of 4264
8A-190 ELECTRICAL-BODY AND CHASSIS
CIRCUIT DIAGRAM WITH ANTI THEFT (LHD) EUROPE
RTW48AXF032101
Page 849 of 4264
ELECTRICAL-BODY AND CHASSIS 8A-191
TROUBLESHOOTING
1. Dome light dose not light
Checkpoint Trouble Cause Countermeasure
Replace the dome light bulb
Burned out the bulb
NG
Repair or replace the dome
light assembly
Dome light switch function
Switch malfunction
Repair open circuit or
connector contact
Continuity between
connector 5
H-12 - 1 L-1
Open circuit or poor connector
contact
NG NG OK
OK
Dome light bulb continuity
2. Dome light does not go out
Repair or replace the door
switch
Switch malfunction or foreign
material switch
NG
Repair short circuit or
connector contact
Continuity between
connector 2
L-1 -ground
when shutting the door
(Should be no continuity)
Short circuit
NG OK
Door switch function (Both
side)
Page 850 of 4264
8A-192 ELECTRICAL-BODY AND CHASSIS
REMOVAL AND INSTALLATION
DOME LIGHT
Removal
1. Remove the dome light lens 1 free.
2. Remove two dome light fixing screws.
3. Remove the wiring connector.
4. Remove the dome light.
5. Pull the bulb
2 to remove it.
Installation
Follow the removal procedure in the reverse order to install the
dome light.
Pay close attention to the important points mentioned in the
following paragraphs.
Bulb
Be absolutely sure that the dome light bulb is correctly
installed.
This will prevent a poor contact and an open circuit.