high beam ISUZU TF SERIES 2004 Workshop Manual

Page 683 of 4264

ELECTRICAL-BODY AND CHASSIS 8A-25
Light Name Rated Power
V-W Number of
Bulbs Lens
Color Remarks
W/O Tacho 5Illumination light 14-2
W/ Tacho 7White
Turn Signal 14-1.12 2 Green
High Beam 14-1.12 1 Blue
Low Fuel 14-1.12 1 Amber
A/T Oil Temp 14-1.12 1 Red
Brake system 14-1.12 1 Red
4WD 14-1.12 1 Green
Seat belt 14-1.12 1 Red
Oil pressure 14-1.12 1 Red
ABS 14-1.12 1 Amber
SEDIMENTER 14-1.12 1 Red
AIR BAG 14-1.12 1 Red
Brake 14-1.12 1 Red
Charge 14-1.12 1 Red
Check Trans 14-1.12 1 Red
Check 4WD 14-1.12 1 Red
Power drive 14-1.12 1 Amber
3rd start 14-1.12 1 Green
4L 14-1.12 1 Green
Cruise Set 14-1.12 1 Green
Check Engine 14-1.12 1 Amber
Front Fog 14-1.12 1 Green
Rear foglight 14-1. 12 1 Amber
Glow 14-1.12 1 Amber
P LED 1 Green
R LED 1 Green
N LED 1 Green
D LED 1 Green
3 LED 1 Green
2 LED 1 Green












Indicator/
Warning
light
A/T shift
indicator
L LED 1 Green

Page 778 of 4264

8A-120 ELECTRICAL-BODY AND CHASSIS
TROUBLE SHOOTING
HEADLIGHT
1. Both the headlights (high and low beam) do not light

Checkpoint Trouble Cause Countermeasure


Repair the wiring

Poor ground point contact
NG

Repair open circuit or
connector contact


Repair open circuit


Repair or replace the
combination switch


Voltage between 1
B-60 -
ground


Open circuit between lighting
relay and lighting switch

Open circuit between battery
positive terminal and lighting
relay

Combination switch continuity

Poor switch contact or sw
faulty

Voltage between
5
X-12 - ground and
2
X-12 - ground


Reinstall or replace the
lighting relay

Lighting relay

Poor relay contact or relay
faulty

NG NG NG NG OK
OK
OK OK

Ground point contact (C-36)


Repair open circuit
Wiring continuity between

B-60 - C-36


Open circuit
NG OK

Page 779 of 4264

ELECTRICAL-BODY AND CHASSIS 8A-121
2. High or low beam does not light on both headlights

Checkpoint Trouble Cause Countermeasure


Repair or replace the
combination switch

Dimmerpassing switch
continuity

Poor switch contact or switch
faulty
NG

Repair open circuit or
connector contact
Voltage between
4
X-4 - ground and
4
B-60 - ground

Open circuit between
headlight and dimmerpassing
switch
NG OK



3. RH (or LH) high and low beam does not light



Replace the headlight bulb

Headlight connector continuity

Blown filament or air leakage
NG

Repair or replace the wire
and/or connector
Wiring continuity between
connector 3
C-19 - fuse No.
EB-7 or 3
C-26 fuse No.
EB-8

Open circuit and/or poor
connector contact
NG OK

Reinstall or replace fuse No.
EB-7 or No. EB-8
Fuse No. EB-7 (10A) or
No. EB-8 (10A) (Relay and
fuse box)
(No. EB-7 RH, No. EB-8: LH)
Poor installation or blown fuse
NG
OK



4. High or low beam does not light on one headlight (RH or LH)

Replace the headlight
assemblyHeadlight connector continuityBlown filament NG
Repair open circuit or
connector contactWiring continuity between
headlight and dimmerpassing
switchOpen circuit between
headlight and dimmerpassing
switch NG OK