torque JAGUAR XFR 2010 1.G Workshop Manual
Page 2226 of 3039
Interior Trim and Ornamentation - A-Pillar Trim Panel
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1.
2. Published: 11-May-2011
3. Torque: 6 Nm
Page 2236 of 3039
5.
6. Torque: 40 Nm 7. CAUTIONS:
Note the fitted position of the component prior to
removal.
Make sure that these components are installed to the
noted removal position.
Torque: 9 Nm
Page 2240 of 3039
6. CAUTIONS:
Make sure the locating dowels are installed correctly.
Make sure that the clips are correctly located.
Torque: 6 Nm
7. CAUTIONS:
Note the fitted position of the component prior to
removal.
Make sure that the clips are correctly located.
8. CAUTIONS:
Note the fitted position of the component prior to removal.
Make sure that the clips are correctly located. www.JagDocs.com
Page 2251 of 3039
Published: 11-May-2011
Interior Trim and Ornamentation - Instrument Panel Speaker Grille
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
2. CAUTIONS:
Protect the surrounding trim to avoid damage.
Make sure that the clips are correctly located.
3.
4. CAUTION: Make sure that the component is correctly
located on the locating dowels.
NOTE: Do not disassemble further if the component is
removed for access only.
Torque: 2 Nm
Page 2255 of 3039
13.
Vehicles with roof opening panel
14. NOTES:
Note the different lengths of screws.
Make sure that the component is installed to the
position noted on removal.
Torque: 2 Nm
Page 2256 of 3039
Vehicles without roof opening panel
15. NOTES:
Note the different lengths of screws.
Make sure that the component is installed to the
position noted on removal.
Torque: 2 Nm
All vehicles
16.
Page 2264 of 3039
Interior Trim and Ornamentation - Parcel Shelf
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011
1. Refer to: C-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
2. Torque: 12 Nm www.JagDocs.com
Page 2267 of 3039
7. NOTE: The procedure must be carried out on both
sides of the seat.
Torque: 6 Nm
8.
Page 2279 of 3039
Interior Trim and Ornamentation - Sun Visor
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011
1. CAUTION: Take extra care not to damage the edges of the
component.
2. TORQUE: 2 Nm www.JagDocs.com
Page 2284 of 3039
Published: 11-May-2011
Exterior Trim and Ornamentation - Luggage Compartment Lid Moulding
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to: Luggage Compartment Lid Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
2.
3. Torque: 3 Nm 4. www.JagDocs.com