abs module JAGUAR XFR 2010 1.G Workshop Manual
Page 2 of 3039
Table of ContentsContents1: General Information
100: Service Information
100-00: General Information
Description and OperationAbout This Manual
Application and Use of Specifications
Battery and Battery Charging Health and Safety Precautions
Brake System Health and Safety Precautions
Diesel Fuel System Health and Safety Precautions
General Service Information
Health and Safety Precautions
How To Use This Manual
Important Safety Instructions
Petrol and Petrol-Ethanol Fuel Systems Health and Safety Precautions
Solvents, Sealants and Adhesives
Standard Workshop Practices
Symbols Glossary
Supplemental Restraint System (SRS) Health and Safety Precautions
Road/Roller Testing
Window Glass Health and Safety Precautions
Diagnostic Trouble Code (DTC) IndexDTC: Adaptive Damping Module (SUMB)
Diagnostic Trouble Code (DTC) IndexDTC: Anti-Lock Braking System (ABS)
Diagnostic Trouble Code (DTC) IndexDTC: Audio Amplifier Module (AAM)
Diagnostic Trouble Code (DTC) IndexDTC: Blind Spot Monitoring System Module (SODL/SODR)
Diagnostic Trouble Code (DTC) IndexDTC: Central Junction Box (CJB)
Diagnostic Trouble Code (DTC) IndexDTC: Climate Control Module (HVAC)
Diagnostic Trouble Code (DTC) IndexDTC: Digital Audio Broadcast Module (DABM)
Diagnostic Trouble Code (DTC) IndexDTC: Driver Door Module/Passenger Door Module (DDM/PDM)
Diagnostic Trouble Code (DTC) IndexDTC: Driver/Passenger Seat Module (DSM/PSM)
Diagnostic Trouble Code (DTC) IndexDTC: Electric Parking Brake (PBM)
Diagnostic Trouble Code (DTC) Index V8 S/C 5.0L Petrol, DTC: Engine Control Module (ECM)
Diagnostic Trouble Code (DTC) IndexDTC: Front Seat Climate Control Module (DCSM)
Diagnostic Trouble Code (DTC) IndexDTC: Headlamp Control Module (HCM)
Diagnostic Trouble Code (DTC) IndexDTC: Instrument Cluster (IPC)
Diagnostic Trouble Code (DTC) IndexDTC: Integrated Audio Module (IAM)
Diagnostic Trouble Code (DTC) IndexDTC: Integrated Control Panel (FCIMB) 
Page 5 of 3039
Disassembly and AssemblyShock Absorber and Spring Assembly204-04: Wheels and TiresSpecificationDescription and OperationComponent Location
Overview
System Operation and Component DescriptionDiagnosis and TestingWheels and TiresRemoval and InstallationTire Low Pressure Sensor
Tire Pressure Monitoring System (TPMS) Front Antenna
Tire Pressure Monitoring System (TPMS) Rear Antenna
Tire Pressure Monitoring System (TPMS) Module
Tire Pressure Monitoring System (TPMS) Receiver
Wheel and Tire204-05: Vehicle Dynamic Suspension
Description and OperationComponent Location - V8 5.0L Petrol/V8 S/C 5.0L Petrol
Overview - V8 5.0L Petrol/V8 S/C 5.0L Petrol
System Operation and Component Description - V8 5.0L Petrol/V8 S/C 5.0L PetrolDiagnosis and TestingVehicle Dynamic SuspensionRemoval and InstallationAdaptive Damping Module
Front Suspension Vertical Accelerometer
Rear Suspension Vertical Accelerometer204-06: Ride and Handling Optimization
Description and OperationComponent Location
Overview
System Operation and Component Description205: Driveline
205-00: Driveline System - General Information
Diagnosis and TestingDriveline SystemGeneral ProceduresDriveline Angle Inspection205-01: DriveshaftSpecification 
Page 8 of 3039
Parking Brake Module
Parking Brake Switch
Parking Brake Release Actuator206-06: Hydraulic Brake ActuationSpecificationDescription and OperationComponent Location
Overview
System Operation and Component DescriptionDiagnosis and TestingHydraulic Brake ActuationRemoval and InstallationBrake Fluid Reservoir (70.30.16)
Brake Master Cylinder (70.30.08)206-07: Power Brake ActuationSpecificationDescription and OperationComponent Location
OverviewDiagnosis and TestingPower Brake SystemRemoval and InstallationBrake Booster (70.50.17)
Brake Vacuum Pump - V8 5.0L Petrol/V8 S/C 5.0L Petrol206-09: Anti-Lock Control - Stability AssistSpecificationDescription and OperationComponent Location
Overview
System Operation and Component DescriptionDiagnosis and TestingAnti-Lock Control - Stability AssistRemoval and InstallationAnti-Lock Brake System (ABS) Module (70.60.02)
Front Wheel Speed Sensor
Hydraulic Control Unit (HCU) (70.60.18) (70.60.19)
Rear Wheel Speed Sensor (70.60.04)
Steering Wheel Rotation Sensor
Yaw Rate Sensor and Accelerometer211: Steering System
211-00: Steering System - General InformationSpecification 
Page 15 of 3039
Catalyst Monitor Sensor RH
Crankshaft Position (CKP) Sensor
Engine Control Module (ECM)
Engine Coolant Temperature (ECT) Sensor
Engine Oil Level Sensor
Front Knock Sensor (KS) LH
Front Knock Sensor (KS) RH
Fuel Rail Pressure (FRP) Sensor
Heated Oxygen Sensor (HO2S) LH
Heated Oxygen Sensor (HO2S) RH
Manifold Absolute Pressure (MAP) Sensor
Mass Air Flow (MAF) Sensor
Rear Knock Sensor (KS) LH
Rear Knock Sensor (KS) RH
Variable Valve Timing (VVT) Oil Control Solenoid LH
Variable Valve Timing (VVT) Oil Control Solenoid RH307: Automatic Transmission/Transaxle
307-01B: Automatic Transmission/Transaxle - TDV6 3.0L Diesel /V8 5.0L Petrol/V8 S/C 5.0L 
PetrolSpecificationDescription and OperationComponent Location
Overview
System Operation and Component DescriptionDiagnosis and TestingDiagnosticsGeneral ProceduresTransmission Fluid Level Check
Transmission Fluid Drain and RefillRemoval and InstallationInput Shaft Seal
Extension Housing Seal
Transmission Control Module (TCM) and Main Control Valve Body
Transmission Fluid Pan, Gasket and Filter
Transmission Support Insulator - V8 5.0L Petrol/V8 S/C 5.0L Petrol
Transmission, Transmission Fluid Cooler and Transmission Fluid Cooler Tubes - V8 5.0L Petrol/V8 
S/C 5.0L Petrol
Transmission and Transmission Fluid Cooler - V8 5.0L Petrol/V8 S/C 5.0L PetrolRemovalTransmission - V8 5.0L Petrol/V8 S/C 5.0L PetrolInstallationTransmission - V8 5.0L Petrol/V8 S/C 5.0L Petrol 
Page 52 of 3039
Air Conditioning A/C  Accelerator Pedal Position APP 
Is a multitrack sensor which inputs the drivers demand into the engine 
control module (ECM) After Bottom Dead Center ABDC Event occurring after bottom dead center After Top Dead Center ATDC Event occurring after top dead center Anti-lock Brake System ABS 
System which prevents wheel lock-up under braking by sensing lack of 
rotation of a wheel(s) and diverting fluid pressure away from it (them) Alternating Current ac  Amplitude Modulation AM  Automatic Temperature Control ATC  Automatic Transmission Fluid ATF  Ampere A SI unit of current Ampere hour Ah  Barometric Pressure BARO Pressure of surrounding air at any given temperature and altitude Battery positive voltage B+ The positive voltage from a battery or any circuit connected directly to it Before Bottom Dead Center BBDC Event occurring before bottom dead center Before Top Dead Center BTDC Event occurring before top dead center Bottom Dead Center BDC Lowest point of piston travel in a reciprocating engine Battery Junction Box BJB  Brake Pedal Position BPP  Brake Horsepower BHP 
Effective horsepower developed by an engine or motor, as measured by a 
brake applied to its output shaft British Standard BS Standard specification issued by the British Standards Institution Brake Traction Control System BTCS   
Page 53 of 3039
Bus Topology of a 
communication 
network  Coast Clutch Solenoid CCS  Camshaft Position CMP Indicates camshaft position Carbon dioxide CO² Colorless gas with a density of approximately 1.5 times that of air Carbon monoxide CO Poisonous gas produced as the result of incomplete combustion Chlorofluorocarbon CFC  Catalytic converter 
 In-line exhaust system device used to reduce the level of engine exhaust 
emissions Celsius C 
SI term for the Centigrade scale, with freezing point at zero and boiling point at 100 degrees Compact Disc CD  Cylinder Head Temperature 
Sensor CHT Sensor A sensor for measuring the temperature of the cylinder head Central Junction Box CJB  Crankshaft Position CKP Indicates crankshaft position Clutch Pedal Position CPP Indicates clutch pedal position Controller Area Network CAN 
A communication system which allows control modules to be linked together Constant Velocity CV  Cubic centimeter cm³  Central Security Module CSM Electronic module to support security system functionality Data Link Connector DLC 
Connector providing access and/or control of the vehicle information, operating conditions, and diagnostic information Driver Door Module DDM Electronic module to support driver door functionality Driver Seat Module DSM Electronic module to support driver seat functionality Daytime Running Lamps DRL  Deutsche Institut fur Normung DIN German standards regulation body Diagnostic Trouble Code DTC 
An alpha/numeric identifier for a fault condition identified by the On-Board Diagnostic (OBD) system Direct current dc 
Current which flows in one direction only, though it may have appreciable pulsations in its magnitude Domestic Data Bus D2B  Digital Versatile Disc DVD  Electronic Automatic Temperature Control EATC 
 Exhaust Gas Recirculation EGR  Exhaust Gas Recirculation Temperature Sensor EGRT Sensing EGR function based on temperature change Electronic Brake Force 
Distribution EBD 
 Engine Control Module ECM Electronic module to support engine functionality Electronic Crash Sensor ECS Sensor to measure severity of impact Engine Coolant Temperature ECT  Engine Oil Pressure EOP  European On-Board Diagnostic EOBD  Electronic Pressure Control EPC  Electrically Erasable 
Programmable Read-Only Memory EEPROM 
 Erasable Programmable 
Read-Only Memory EPROM 
 Evaporative Emission EVAP 
System designed to prevent fuel vapor from escaping into the atmosphere. Typically includes a charcoal filled canister to absorb fuel vapor Flash Electrically Erasable 
Programmable Read-Only Memory FEEPROM 
 Front Electronic Module FEM  Flash Erasable Programmable 
Read-Only Memory FEPROM 
 Frequency Modulation FM  Fuel Pump Driver Module FPDM  Fuel Rail Pressure FRP  Generic Electronic Module GEM  Ground GND 
Electrical conductor used as a common return for an electrical circuit or 
circuits, and with a relative zero potential Global Positioning System GPS  Global System for Mobile 
Communication GSM 
 Gross Vehicle Weight GVW  Heated Oxygen Sensor HO2S Electrically heated oxygen sensor which induces fuelling corrections  
Page 54 of 3039
Hydrofluorocarbon HFC  High tension HT  Hydrocarbon HC  Idle Air Control IAC 
Stepper motor driven device which varies the volume of air by-passing the 
throttle to maintain the programmed idle speed Intake Air Temperature IAT Temperature of intake air Inertia Fuel Shut-off IFS 
An inertia system that shuts off the fuel supply when activated by pre-determined force limits brought about by (e.g.) collision Input Shaft Speed ISS Indicates input shaft speed Key On, Engine Off KOEO  Key On, Engine Running KOER  Kilogram (mass) kg  Kilogram (force) kgf  Kilogram force per square 
centimeter kgf/cm² 
 Kilometer km  Kilometer per hour km/h  Kilopascal kPa  Kilovolt kV  Knock Sensor KS 
Sensor which detects the onset of detonation, and signals the ECM to 
retard the ignition Liquid Crystal Display LCD 
Optical digital display system, to which applied voltage varies the way the crystals reflect light, thereby modifying the display Lighting Control Module LCM  Light Emitting Diode LED  Low Tension LT 
Primary circuit of the ignition system, linking the battery to the primary winding in the ignition coil Left-Hand LH  Left-Hand Drive LHD  Mass Air Flow MAF 
System which provides information on the mass flow rate of the intake air 
to the engine Manifold Absolute Pressure MAP Absolute pressure of the intake manifold air Manifold Absolute Pressure and Temperature MAPT 
 Malfunction Indicator Lamp MIL 
A required on-board indicator to alert the driver of an emission related 
malfunction Meter (measurement) m  Metric (screw thread, e.g. M8) M  Farad F Unit of electrical capacitance Millimeter mm  Millimeter of mercury mmHg  Millisecond ms  Model year MY  Newton N SI unit of force. 1 N = 0.2248 pounds force Newton Meter Nm SI unit of torque. Must not be confused with nm (nanometer) Negative Temperature 
Coefficient NTC 
 Naturally aspirated N/A 
Fuelling system using intake air at atmospheric pressure; not supercharged or turbocharged Noise, Vibration and Harshness NVH  North American Specification NAS Vehicles for sale in the USA and Canadian markets On-Board Diagnostic OBD 
A system that monitors some or all computer input and output control 
signals. Signal(s) outside the pre-determined limits imply a fault in the system or a related system Oxides of Nitrogen Nox  Oxygen Sensor O2S A sensor which detects oxygen content in the exhaust gases On-board Refuelling Vapour Recovery ORVR 
 Output State Control OSC  Output Shaft Speed OSS  Passenger Air Bag Deactivation PAD  Pulsed Secondary Air Injection PAIR  Passive Anti-Theft System PATS  Positive Crankcase Ventilation PCV  Parameter Identification PID 
An index number referring to a parameter within a module without knowledge of its storage location Park/Neutral Position PNP  Pulse Width Modulation PWM  Programmable Electronic 
Control Units System PECUS 
Process whereby a common ECM is programmed on the production line to 
suit the market requirements of a particular vehicle  
Page 101 of 3039
Published: 11-May-2011 
General Information - Supplemental Restraint System (SRS) Health and 
Safety Precautions 
Description and Operation 
 
WARNINGS: 
 
 
Only qualified technicians are allowed to work on pyrotechnic components. 
 
 
INHALED: Exposure to pyrotechnic residue may cause low blood pressure, severe headache, irritation of mucous 
membranes, fainting, shortness of breath or rapid pulse. Move a victim to fresh air. Seek immediate medical attention. 
 
 
EYE CONTACT: Exposure to unburned pyrotechnic residue may cause irritation, burning and etching of the eyes. Flush 
immediately with plenty of cold running water for at least 15 minutes. Seek immediate medical attention. 
 
 
EYE CONTACT: Exposure to burned pyrotechnic residue may cause irritation, burning and etching of the eyes. Flush 
immediately with diluted boric acid solution. Seek immediate medical attention. 
 
 
SKIN CONTACT: Unburned pyrotechnic residue may be rapidly absorbed through the skin in toxic quantities. Wash 
immediately with plenty of soap and water. Seek medical attention. 
 
 
SKIN CONTACT: Burned pyrotechnic residue may be rapidly absorbed through the skin in toxic quantities. Wash with 
plenty of water. Do not use soap. Seek medical attention. 
 
 
SWALLOWED: Unburned pyrotechnic residue is extremely toxic. If conscious drink plenty of water then induce vomiting. 
Seek immediate medical attention. If unconscious, or in convulsions do not attempt to induce vomiting or give anything by 
mouth. Seek immediate medical attention. 
 
 
SWALLOWED: Burned pyrotechnic residue is extremely toxic. Drink plenty of water and seek immediate medical attention. 
The deployment key must only be accessible to authorized personnel. 
Make sure that the deployment key remains removed from the deployment equipment except during deployment. 
 
 
If permenantly disabling or enabling the passenger air bag a new seat belt for vehicles without or with a passenger air 
bag must be installed. 
 
 
Undeployed pyrotechnic components must not be deployed in the vehicle. 
Pyrotechnic components must be deployed following local regulations. 
Check thoroughly that no loose objects can be spread during the deployment of pyrotechnic components. 
Pyrotechnic components must be transported following local regulations. 
Never carry out any electrical measurement on disconnected, undeployed pyrotechnic components. 
Pyrotechnic components must not be disassembled. 
Pyrotechnic components are not interchangeable between vehicles. 
 
 
Always carry a live air bag module away from the body with the air bag or trim cover pointing upwards.  
Page 117 of 3039
 
DTC Description Possible Causes Action   Sensor or Left Rear 
Vertical Acceleration 
Sensor or Right Rear 
Vertical Acceleration 
Sensor supply partial 
short to other circuit 
or ground 
Left Front Vertical 
Acceleration Sensor or 
Right Front Vertical 
Acceleration Sensor or 
Left Rear Vertical 
Acceleration Sensor or 
Right Rear Vertical 
Acceleration Sensor 
internal failure 
Internal control 
module failure  U0001-88 
High speed CAN 
communication 
bus - Bus off  
Lost Communication 
With Engine Control 
Module (ECM) (CAN 
Bus circuit fault)  
Check Engine Control Module for stored DTCs. Refer to the 
electrical circuit diagrams and check CAN Bus circuit for faults, 
check CAN circuits for open circuits or shorts to power, ground 
or other circuits U0100-00 
Lost 
Communication 
With ECM/PCM A 
- No sub type 
information  
Missing message from 
ECM  
Check Engine Control Module for stored DTCs. Refer to the 
electrical circuit diagrams and check CAN Bus for circuit fault U0101-00 
Lost 
Communication 
with TCM - No 
sub type 
information  
Lost Communication 
with Transmission 
control module (TCM) 
(CAN Bus circuit fault)  
Check Transmission Control Module for stored DTCs. Refer to 
the electrical circuit diagrams and check CAN Bus for circuit 
fault U0103-00 
Lost 
Communication 
With Gear Shift 
Control Module 
A - No sub type 
information  
Lost Communication 
With Gear Shift 
Module (GSM) (CAN 
Bus circuit fault)  
Check Gear Shift Module for stored DTCs. Refer to the 
electrical circuit diagrams and check Can Bus for circuit faults U0121-00 
Lost 
Communication 
With Anti-Lock 
Brake System 
(ABS) Control 
Module - No sub type information  
Lost Communication 
With Anti-Lock Brake 
System (ABS) Control 
Module (CAN Bus 
circuit fault)  
Check Anti lock Brake System Control Module for stored DTCs. 
Refer to the electrical circuit diagrams and check Can Bus 
circuit to Anti lock Brake System Control Module for circuit 
faults U0132-00 Lost  
Lost Communication  
Check Air Suspension Control Module for stored DTCs. Refer to Communication With Suspension With Air Suspension the electrical circuit diagrams and check CAN Bus circuit to Air Control Module Control Module (CAN Suspension Control Module for circuit faults A - No sub type Bus circuit fault information U0136-00 
Lost 
Communication 
With Differential 
Control Module - 
Rear - No sub type information  
Lost Communication 
With Rear Differential 
Control Module (CAN 
Bus circuit fault)  
Check Rear Differential Control Module for stored DTCs. Refer 
to the electrical circuit diagrams and check Can Bus circuit to 
Rear Differential Control Module for circuit faults U0140-00 
Lost 
Communication 
With Body 
Control Module - 
No sub type 
information  
Lost Communication 
With Body Control 
Module (Front Smart 
Junction Box) (CAN 
Bus circuit fault)  
Check Body Control Module for stored DTCs. Refer to the 
electrical circuit diagrams and check CAN Bus circuit to Body 
Control Module for faults U0142-00 
Lost 
Communication 
With Body 
Control Module 
B - No sub type 
information  
Lost Communication 
with rear smart 
junction box (CAN Bus 
circuit fault)  
Check Rear Smart Junction Box for stored DTCs. Refer to the 
electrical circuit diagrams and check Can Bus circuit to Rear 
Smart Junction Box for faults U0155-00 
Lost 
Communication 
With Instrument 
Panel Cluster  
Lost Communication 
With Instrument Panel 
Cluster (IPC) Control  
Check Instrument Panel Cluster for stored DTCs. Refer to the 
electrical circuit diagrams and check CAN Bus to Instrument 
Panel Cluster for circuit fault  
Page 118 of 3039
 
DTC Description Possible Causes Action  (IPC) Control 
Module - No sub 
type information Module (CAN bus 
circuit fault)  U0300-00 
Internal control 
module software 
incompatibility - 
No sub type 
information  
CAN master 
configuration ID 
incorrect  
Check Front Smart Junction Box vehicle configuration file, 
check part number of adaptive damping control module U0401-68 
Invalid Data 
Received from 
ECM/PCM A - 
Event 
information  
Invalid Data Received 
from Engine Control 
Module  
Check Engine Control Module for DTCs. Refer to the relevant 
DTC index U0402-68 
Invalid Data 
Received from TCM - Event 
information  
Invalid Data Received 
from Transmission 
control module  
Check for Transmission Control Module DTCs. Refer to relevant 
DTC index U0404-68 
Invalid Data 
Received from 
Gear Shift 
Control Module 
A - Event 
information  
Invalid data received 
from gear shift control 
module  
Check Gear Shift Control Module for DTCs. Refer to the 
relevant DTC index U0415-68 
Invalid Data 
Received From 
Anti-Lock Brake 
System (ABS) 
Control Module - 
Event 
information  
Invalid Data Received 
From Anti-Lock Brake 
System (ABS) Control 
Module  
Check for Anti lock Brake System DTCs. Refer to the relevant 
DTC index U0421-68 
Invalid Data 
Received from 
Suspension 
Control Module 
A - Event 
information  
Invalid Data Received 
From Air Suspension 
Control Module  
Check Air Suspension Control Module for stored DTCs. Refer to 
the relevant DTC index U0422-68 
Invalid Data 
Received From 
Body Control 
Module - Event 
information  
Invalid Data Received 
From Body Control 
Module (Front Smart 
Junction Box)  
Check Body Control Module (Front Smart Junction Box) for 
stored DTCs. Refer to the relevant DTC index U0437-68 
Invalid Data 
Received From 
Differential 
Control Module - 
Rear - Event 
information  
Invalid Data Received 
From Rear Differential 
Control Module  
Check Rear Differential Control Module for stored DTCs. Refer 
to the relevant DTC index U0443-68 
Invalid Data 
Received From 
Body Control 
Module B - 
Event 
information  
Invalid Data Received 
From body control 
module B (Rear Smart 
Junction Box)  
Check rear smart junction box for DTCs and refer to relevant 
DTC index U1A14-00 CAN 
initialization 
failure - No sub type information  
CAN network harness 
short, disconnected  
Refer to circuit diagrams and check CAN Bus circuit for fault 
(short to power, ground or open circuit) U2100-00 
Initial 
Configuration 
Not Complete - 
No sub type 
information  
Car Configuration 
Data not loaded (New 
Body Control Module 
(Front Smart Junction 
Box) fitted to vehicle 
and not initialized) 
Internal Body Control 
Module (Front Smart 
Junction Box) failure  
Install car config to Front Smart Junction Box. Clear DTC and 
retest systems U2101-00 
Control Module 
Configuration 
Incompatible - 
No sub type 
information  
Car Configuration 
Data transmitted over 
CAN does not match 
adaptive damping 
control module 
internal config  
Carry out the new module software installation procedure