ad blue KIA SPORTAGE 2017 Navigation System Quick Reference Guide
Page 16 of 92
13
FeaturesDescription
InfoTurns the Radio Text information on and off
!Ÿ
If the Info soft button is OFF (the blue indicator on the Info
button is not illuminated), information will not be displayed
even if there is information being transmitted from the broad-
cast station.
!Ÿ
If the Info soft button is ON (the blue indicator on the Info
button is illuminated), then broadcast information will be dis-
played. Information may not be displayed if there is no infor-
mation being transmitted from the broadcast station.
Menu
!Ÿ
Autostore
Saves frequencies with superior reception to Preset buttons
While Auto Store is operating, pressing the Auto Store button
again will cancel the function and play the previous
frequency.
!Ÿ
Preset Scan
Plays preset frequencies for 5 or 10 seconds each
!Ÿ
HD on: 10 seconds
!Ÿ
HD off: 5 seconds
Scan/
Auto Scan/
Preset Scan Displays an activated mode from the Scan/Auto Scan/Preset
Scan modes.
SoundHound
Runs the SoundHound feature.
For more details regarding this feature, refer to the SoundHound
information in the Info section.
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E
< 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 18 of 92
15
Basic Mode Screen (HD Radio™ reception ON)
NameDescription
HD
Channel
Number Analog station and corresponding HD Radio channel number
saved in the preset list.
Broadcast
Info Displays detailed information about the current broadcast (the
details of the information shown are different depending on
whether the Info button is selected)
HD Radio
When the HD Radio soft button is ON (the blue indicator on the
HD Radio button is illuminated), HD radio signals will be broad-
cast.
HD Radio™
Reception
&Channel
buttons Displays main HD Radio™ channels and used to directly select
the currently available channels.
HD Radio technology allows AM and FM radio stations to
transmit audio and data using a digital signal. The HD format
allows stations to simultaneously broadcast one or more
different programs in addition to the program being transmitted
on the station’s analog channel. When the HD Radio soft
button on the screen is ON (blue indicator on the HD Radio
button is illuminated), HD Radio reception will become active
whenever a broadcast channel sends an HD Radio signal
and when the vehicle is in areas where the signal reception
is strong. If multiple HD Radio programs are available, a soft
button for each channel will appear on the screen allowing you
to select from HD1, HD2, etc.
002400450052005800570003002B00270003003500440047004C0052043000030037
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 28 of 92
25
Bluetooth® Audio
i Information
• Artist info and Title may not be supported by mobile phone
0025004F005800480057005200520057004B00710003002400580047004C005200030030005200470048
Features Description
Mode
Displays the current operating mode
Phone Name Displays name of connected phone
Artist InfoName of current artist
TitleName of current song
Previous
File
!Ÿ
If play time is less than 3 seconds, moves to the previous file
!Ÿ
If play time is more than 3 seconds, plays the current file
from the beginning
This function may differ depending on the model of mobile
phone
Play/Pause Plays/Pauses Bluetooth Audio
Next FileMoves to the next file
ConnectionsMoves to the Bluetooth Settings screen. You can pair a new
device or change/delete paired device(s)
SoundHoundRuns the SoundHound feature.
For more details regarding this feature, refer to the
SoundHound information in the Info section.
SEEK/TRACK
Plays the previous/next file
TUNE
TUNE
is not supported.
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 31 of 92
28
00380056004C0051004A00030025004F005800480057005200520057004B0071
0025004F005800480057005200520057004B00710003
0026005200510051004800460057004C00520051
Pairing a New Device
Before you can use the Bluetooth
feature, you must first pair/connect
your mobile phone to your car.
Up to 5 Bluetooth devices can be
paired.
Only one Bluetooth device can be
connected at a time.
Pairing a New Device by Selecting
Phone/Call
Select 0033002B003200310028 key in the head unit
or
key in the steering wheel
remote control. ▶
Pair your car after
your mobile phone detects the
Bluetooth device. ▶
Enter the pass-
key or accept the authorization
popup. ▶
Connect Bluetooth.
Pairing a New Device Through the
Phone Settings
Select 00360028003700380033 key in the head
unit. ▶
Select
0033004B005200510048. ▶
Select
0025004F005800480057005200520057004B00030026005200510051004800460057004C00520051. ▶
Select 002400470047000300310048005A.
▶ Pair your car after your mobile
phone detects the Bluetooth device.
▶ Enter the passkey or accept the
authorization popup. ▶
Connect
Bluetooth.
The default passkey is 0000.
The Vehicle name above is an exam-
ple. Check the actual information on
the product.
Connecting
Bluetooth
® Devices
Connects the Bluetooth devices that
you add.
Connecting Devices by Selecting
Phone/Call
Select 0033002B003200310028 key in the head unit
or
key in the steering wheel
remote control. ▶
Select the name
of the device to connect. ▶
Connect
Bluetooth.
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 32 of 92
29
Connecting Devices Through the
Phone Settings
Select 00360028003700380033 key in the head unit.
▶ Select 0033004B005200510048. ▶
Select
0025004F005800480057005200520057004B00030026005200510051004800460057004C00520051. ▶
Select the
name of the device to connect. ▶
Connect Bluetooth.
0025004F005800480057005200520057004B007100030033004B005200510048
Dial
Dials a call after the Bluetooth
devices are connected.
!Ÿ
Select
0033002B003200310028 key in the head unit
or
key in the steering
wheel remote control.
!Ÿ
You can also select
0024004F004F000300300048005100580056 ▶
0033004B005200510048.
Name Description
Keypad Use the keypad to
enter the phone
number that you
want to call. Press
and hold the last
number of a speed
dial to dial a num-
ber that you added
to the Speed Dial
list in the phone
Delete
Deletes the num-
bers that you
entered.
Settings
Moves to a screen
of Phone Settings.
CallMakes a call after
you dial a number
and select CALL. If
the number is listed
in Dialed Calls,
you can select the
number and press
CALL to automati-
cally dial that num-
ber again.
Information
•
Some types of mobile phones may not
suppor
t the Speed Dial function.
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 40 of 92
37
0039
Types of Commands
Voice recognition commands are classified as “Global Commands” and “Local
Commands.”
1. Global Commands ("J
): Commands that can be used immediately after acti-
vating voice recognition.
2. Local Commands (
!¹): Commands that can be used when a multimedia,
navigation, or Bluetooth call is running, or displayed on the screen, after
activating voice recognition.
Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after connecting the
Bluetooth device.
2. To call a person, for example “Call <John Smith>” whose name is listed in
Contacts, you must first download the Contacts list. For details on down-
loading contacts, see “Part 3. Using Bluetooth > Chapter 3. Bluetooth Phone
> 3.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert
the Contacts into voice data during which time you cannot make a call by
name yet. The time takes to convert voice data may vary depending on the
number of Contacts downloaded.
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 44 of 92
41
Radio Commands
CommandOperation
"J Radio
Plays the most recent radio channels from FM, AM, and SiriusXM™.
"JFM Plays FM radio.
"J FM
<87.5~107.9> Tunes to FM <Frequency> according to what you say.
e.g.) FM 87.5: FM eighty seven point five
"J SiriusXM Plays SiriusXM™ radio.
"J SiriusXM
Channel
<0~999> Tunes to SiriusXM™ Channel <Channel Number> according
to what you say.
e.g.) SiriusXM Channel 23: SiriusXM Channel twenty three
"J AM Plays AM radio.
"J AM <530~1710> Tunes to AM <Frequency> according to what you say.
e.g.) AM 530: AM five thirty
!¹ Preset <1~18> Tunes to your preset stations (1 to 18).
!¹ Channel
<0~999> In SiriusXM™ Radio mode, turns on the <Channel Number>
that you say.
Media Commands
* Check the followings before you use media commands.
1. If no media is connected or if no playable files exist at the time when you use these
commands, a voice message will tell you that this is not available at present.
2. If you say the name of the media that is currently playing again, then that media will continue playing. e.g.) Saying “USB” while USB content is playing.
Command Operation
"J Music Continues the last media you played.
"J iPod
Plays the iPod currently connected. This will work the same when an iPhone is
connected. If a USB is connected, then it will be played instead of the iPod.
"JUSB Plays the music on the USB currently connected.
If an iPod is connected, then the iPod will be played instead of the USB.
"J Bluetooth
Audio Plays the music on the Bluetooth phone currently connected.
This may not be supported depending on the Bluetooth connection status.
"J
AUX Plays external devices that are currently connected.
"J My Music Plays My Music files stored in the system.
"J Pandora
Radio Plays Pandora Radio that is currently connected.Pandora Radio
operates according to the iPod
® that is currently connected.
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E
< 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 45 of 92
42
1. USB Music/iPod/My Music Command
CommandOperation
!¹ Play Plays a selected file.
Maintains the current settings during playback.
!¹ Pause Pauses a file that is playing.
Maintains current settings while paused during playback.
!¹ Shuffle Plays files randomly.
Maintains current settings during shuffled playback.
!¹ Shuffle Off Cancels Shuffle and plays files sequentially.
Maintains current settings during sequential playback.
!¹ Repeat Plays the current file repeatedly.
Maintains the current settings during repeat playback.
!¹ Repeat Off Cancels Repeat and plays multiple files.
Maintains current settings during multiple files.
2. Pandora Radio Command
Command
Operation
!¹ Skip Moves to the next track.
!¹ Thumbs up If you like the genre of the music currently playing, say
“Thumbs up” so that more similar music will play.
!¹ Thumbs down If you don’t like the music currently playing, say “Thumbs
down” to minimize the number of playbacks of similar
genre music.
3. Bluetooth Audio/AUX Command
!Ÿ
Bluetooth Audio supports different functions according to connected devices,
therefore some commands are unavailable, including Play, Stop, Previous
Song, and Next Song.
!Ÿ
For external devices (AUX) and some commands are unavailable, including
Play, Stop, Previous, and Next.
0039
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 47 of 92
44
0036004C0055004C00030028005C0048005600030029005500480048
How to start Siri
If you want to use Siri, you have to
connect your iOS device to multime-
dia system through Bluetooth.
(Please check whether your iOS
device supports Siri and turning Siri
On)
Then you can use Siri while pressing
and holding
key on the
steering wheel.
How to use Siri
When you access the Siri screen
while pressing and holding
key on the steering wheel, you can
press
0036005300480044004E button and then you
can speak what you want. Note that
the multimedia system only supports
“Phone” related functions. Other
functions will be performed in your
iOS device. If you press voice key
quickly, Siri would re-start. If you hold
down voice key, Siri would be termi-
nated and the screen would go back
to the previous screen. Eyes-Free
mode would be activated automati-
cally while you are driving. When
shifting gears into P or putting the
Parking brake on, Eyes-Free mode
would be deactivated automatically.
i Information
• Functions and feedbacks from voice
commands via Sir
i are executed in
the iOS device. If the iOS version is
changed, the functions and response
may be different according to the iOS
device and the latest version.
0039
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1
Page 49 of 92
46
SoundHound Main ScreenSoundHound is a music search
engine. It enables users to identify
music by playing or singing a song.
It is also possible to search by typing
the name of the artist, song, album
or lyrics.
The head unit should be connected
to the Internet in order to use
SoundHound. (ex. Wi-Fi)
Accessing SoundHound
1. From the Home screen, select All
Menus, My Menu then select
SoundHound
button.
2. Select SoundHound
button
on Radio modes (AM, FM and
SiriusXM) or Media modes
(Bluetooth Audio, iPod, USB, My
Music and AUX).
Name Description
Mode Displays the current
operating mode.
Back
button Goes back to previ-
ous mode.
What’s
that
Song? Starts the song
recognition process.
After this process is
complete, it goes to
Song screen.
Search
Goes to Search
screen.
HistoryGoes to History
screen.
Favorites Goes to Favorites
screen.
Charts Goes to Charts
screen.
00360052005800510047002B0052005800510047
, @ 2 - @ ( < 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E
< 6 4 " @ & 6 > " 7 / @ 2 3 ( J O E E ß
1