ECU KIA SPORTAGE 2017 Quick Reference Guide

33
0033005500480046004400580057004C00520051005600030035004800540058004C005500480047
0049005200550003003600580046004600480056005600490058004F00030039
0035004800460052004A0051004C0057004C00520051
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if: 1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is
connected or disconnected
3) The rear view camera is operated
4) The car engine starts or stops
5) A system key, such as
003500240027002C0032
key or 003000280027002C0024 key is selected
4.
The microphone used for the voice
recognition system is located in
the headliner directly above the
driver’s head. To make your com-
mands better understood, keep
your body straight in the driver’s
seat when speaking the com-
mand.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands.
6. In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is open.
2) High speed blower from the
air vents. Set climate control to
blow lower than level 3.
3) Vibrations from passing through
a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
0039
,@2-@670<64"@&6>"7@23(JOEE


 0<64"@&6>"7@23(JOEE


 


ß
y
 

35
Skipping Prompt
Messages
When you hear the prompt mes-
sage, press the
key on the
steering wheel remote control to skip
the message and go directly to lis-
tening mode to say your command.
This results in faster operation when
you feel the message is too long or
you already know the command to
use.
i Information
Refer to Part 8 for instructions on
ho
w to change the Voice Recognition
Settings.
Combining Voice
Recognition with
On-Screen Commands
After pressing the key, say
a command after the beep. The
voice recognition system will exe-
cute the desired operation after
understanding the command.
Alternatively, you may touch any of
the corresponding Frequently Used
Commands on the screen while the
Voice Recognition system is in
operation.

Combining voice recognition with
available on-screen commands
is useful when the system is tak-
ing longer than expected or the
voice command did not execute as
desired.
,@2-@670<64"@&6>"7@23(JOEE


 0<64"@&6>"7@23(JOEE


 


ß
y
 

43
0036004C0055004C00030028005C0048005600030029005500480048
How to start Siri
If you want to use Siri, you have
to connect your iOS device to
the Multimedia system through
Bluetooth.
(Please check whether your iOS
device supports Siri and turning Siri
On)
Then you can use Siri while pressing
and holding
key on the
steering wheel.
How to use Siri
When you access the Siri screen
while pressing and holding

key on the steering wheel, you can
press
0036005300480044004E button and then you
can speak what you want. Note that
the Multimedia system only supports
“Phone” related functions. Other
functions will be performed in your
iOS device. If you press voice key
quickly, Siri would re-start. If you hold
down voice key, Siri would be termi-
nated and the screen would go back
to the previous screen. Eyes-Free
mode would be activated automati-
cally while you are driving. When
shifting gears into P or putting the
Parking brake on, Eyes-Free mode
would be deactivated automatically.
i Information
Functions and feedbacks from voice
commands via Sir
i are executed in
the iOS device. If the iOS version is
changed, the functions and response
may be different according to the iOS
device and the latest version.
,@2-@670<64"@&6>"7@23(JOEE


 0<64"@&6>"7@23(JOEE


 


ß
y